Abstract:We report on the difficulties of extracting plastic parameters from constitutive equations derived by instrumented indentation tests on hard and stiff materials at shallow depths of penetration. As a general rule, we refer here to materials with an elastic stiffness more than 10 % of that of the indenter and a yield strain higher than 1 %, as well as to penetration depths less than ∼ 5 times the characteristic tip defect length of the indenter. We experimentally tested such a material (an amorphous alloy) by nanoindentation. To describe the mechanical response of the test, namely the force-displacement curve, it is necessary to consider the combined effects of indenter tip imperfections and indenter deformability. For this purpose, an identification procedure has been carried out by performing numerical simulations (using Finite Element Analysis) with constitutive equations that are known to satisfactorily describe the behaviour of the tested material. We propose a straightforward procedure to address indenter tip imperfection and deformability, which consists of firstly taking account of a deformable indenter in the numerical simulations. This procedure also involves modifying the experimental curve by considering a truncated length to create artificially the material’s response to a perfectly sharp indentation. The truncated length is determined directly from the loading part of the force-displacement curve. We also show that ignoring one or both of these issues results in large errors in the plastic parameters extracted from the data.

Relationships in Instrumented Indentation by Berkovich Indenter

An Insight into the Identifiability of Material Properties by Instrumented Indentation Test Using Manifold Approach Based on P-h Curve and Imprint Shape

Instrumented Indentation of Fused Silica by Berkovich Indenter

Experimental Verification and Theoretical Analysis of the Relationships Between Hardness, Elastic Modulus, and the Work of Indentation

Theoretical Analysis of the Relationships Between Hardness, Elastic Modulus, and the Work of Indentation for Work-Hardening Materials

Identification of Material Parameters Using Indentation Test —study of the Intrinsic Dimensionality of P-h Curves and Residual Imprints

The Effect of Indenter Angle on the Microindentation Hardness

Equivalency of Berkovich and conical load-indentation curves

The Instrumented Indentation Methods for Determining Material Property

Influence of Friction in Material Characterization in Microindentation Measurement.

Characterization of Elastic Modulus and Hardness of Brittle Solids by Instrumented Indentation

Relationship of Stiffness-Based Indentation Properties Using Continuous-Stiffness-Measurement Method

Identification of Material Properties Using Indentation Test and Shape Manifold Learning Approach

Assessing the Elastic Parameters and Energy-Dissipation Capacity of Solid Materials: A Residual Indent May Tell All

Application of Instrumented Indentation Technique in in Situ Performance Characterization of High-Speed Rail Rim

Revelation of a Functional Dependence of the Sum of Two Uniaxial Strengths/hardness on Elastic Work/total Work of Indentation

Examining the Effect of Pileup on the Accuracy of Sharp Indentation Testing

The Indentation Elastic Response - Indentation Shape and the Stress Distribution

Analyzing the Influence of Test Force on Instrumented Indentation Test

The Influence of Indenter Tip Imperfection and Deformability on Analysing Instrumented Indentation Tests at Shallow Depths of Penetration on Stiff and Hard Materials

A Numerical Study of Indentation Using Indenters of Different Geometry