Abstract:The feature of instrumented indentation test (IIT) makes it suitable for the characterization of local constitutive behavior in a small volume of solids. In the present study, the relationship between the shape of the normalized loading P-h curve and the indenter tip rounding radius, and the influences of the constitutive parameters of a Ludwik-type isotropic hardening model on the shape and the initial slope of the normalized unloading P-h curve were investigated by theoretical analysis and sophisticated numerical sensitivity analysis. From the analytical results, a two-stage analytical approach that can inversely identify multiconstitutive parameters simultaneously was proposed. In the first stage, by considering the least-square distance between the experimental and the simulated normalized loading P-h curves (g(h/hmax)) as the objective and C1 in the tip area function as the input variable, the tip rounding was identified by a single-objective optimization procedure. With the optimal tip rounding, a multiobjective optimization procedure was then performed to identify the constitutive parameters of the target materials. The initial slope of the normalized unloading P-h curve (ΔS’(P/Pmax-h/hmax)), absolute value of the differences between the simulated and the experimental maximum load (ΔPmax), initial slope of the unloading P-h curve (ΔS), and contact hardness (ΔH) were set as objectives, while all the material parameters except the Poisson's ratio (v) were considered as input variables. Results of the numerical verification with a set of arbitrarily selected constitutive parameters and the experimental verification on Ti-18 (a near-β high-strength titanium alloy) fit fairly well with uniaxial tensile parameters. With regard to T40, the identified true stress-true plastic strain curve is about 20% higher than the uniaxial tensile curve. One possible explanation is the occurrence of the strength differential and anisotropy effects during the plastic deformation process of α-phase titanium. It is worthy to be noticed that the present study may propose a new way to calibrate the tip area function directly on the target material without any standard indentation sample and improve the quality of the identification of the material constitutive parameters by IIT.

An Insight into the Identifiability of Material Properties by Instrumented Indentation Test Using Manifold Approach Based on P-h Curve and Imprint Shape

Identification of Material Parameters Using Indentation Test —study of the Intrinsic Dimensionality of P-h Curves and Residual Imprints

Identification of Material Properties Using Indentation Test and Shape Manifold Learning Approach

Study on the Identifiability of Material Properties Using Solely the Residual Imprint in Instrumented Indentation Experiment

Inverse Identification of Constitutive Parameters with Instrumented Indentation Test Considering the Normalized Loading and Unloading P-h Curves

On the study of mystical materials identified by indentation on power law and Voce hardening solids

The Influence of Indenter Tip Imperfection and Deformability on Analysing Instrumented Indentation Tests at Shallow Depths of Penetration on Stiff and Hard Materials

Identification of Anisotropic Plasticity Properties of Materials Using Spherical Indentation Imprint Mapping

An objective meta-modeling approach for indentation-based material characterization

Material Characterization Based on Instrumented Indentation

Determination of Plastic Properties by Instrumented Spherical Indentation: Expanding Cavity Model and Similarity Solution Approach

The Instrumented Indentation Methods for Determining Material Property

Influence of Friction in Material Characterization in Microindentation Measurement.

Identification of Elastic-Plastic Properties of Metal Materials by Using the Residual Imprint of Spherical Indentation

Application of Instrumented Indentation Technique in in Situ Performance Characterization of High-Speed Rail Rim

Inverse Method to Determine Parameters for Time-Dependent and Cyclic Plastic Material Behavior from Instrumented Indentation Tests

Identification of Plastic Properties of Metal Materials Using Spherical Indentation Experiment and Bayesian Model Updating Approach

On the Determination of the Anisotropic Plasticity of Metal Materials by Using Instrumented Indentation

Progress in Indentation Test for Material Characterization: A Systematic Review

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Determining plastic properties of a material with residual stress by using conical indentation