Abstract:Abstract This paper investigates the cutting performance and anti-adhesive properties of textured single-point polycrystalline diamond (PCD) cutting tools in machining Aluminium 6082 alloys. The micro/nano textures were first milled using a fibre laser (1064-nm wavelength) at different power intensities, feed speeds and pulse durations, and finally characterised using scanning electron microscopy, white light interferometry and energy dispersive X-ray spectroscopy. The effect of different textures on the cutting performance was investigated in turning tests under dry cutting conditions. The test was stopped at regular lengths of cut to allow analysis of height of adhesion through 3D white light interferometry. The data processing of the cutting forces and the microscopical characterisation of the tested cutting tools enabled the evaluation of the effects of texture design, friction coefficient and adhesive properties. The results indicated that feed force in tools with grooves perpendicular to the chip flow direction (CFD) was more stable (20–40 N) than the benchmark (6–41 N). Similarly, the thrust force for tools with grooves parallel to CFD and grooves perpendicular to CFD showed a homogeneous trend fluctuating between 60 and 75 N as compared with the benchmark (ranging between 73 and 90 N). For texture depth in the order of 260 nm and post process roughness in the order of tens of nanometers, a reduction of average friction coefficient (0.28 ± 0.14) was reported when using lasered inserts with grooves parallel to the chip flow direction compared with the benchmark tools (0.34 ± 0.26) corroborated by reduced stiction of workpiece material on the rake face. In machining via textured tools with grooves perpendicular to CFD, the cutting forces were reduced by 23%, and the surface quality of the machined workpiece was improved by 11.8%, making this geometry the preferred choice for finishing applications. Using grooves parallel to CFD reduced the cutting forces by 11.76%, adhesion by 59.36% and friction coefficient by 14.28%; however, it increased the surface roughness of the machined workpiece, making this geometry suitable for roughing operations. For the first time, laser manufacturing is proposed as a flexible technique to functionalise the geometrical and wear properties of PCD cutting tools to the specific applications (i.e. roughing, finishing) as opposed to the standard industrial approach to use microstructurally different PCDs (i.e. grain size and binder %) based on the type of operation.

The Effect of Laser Texture on Adhesion and Tribological Properties of Boron-Doped Diamond Film on WC-Co Cemented Carbide

Fabrication and tribological properties of textured diamond coatings on WC-Co cemented carbide surfaces

Study on the substrate surface micro-texturing/carburizing regulating the film-substrate adhesion and wear behavior of DLC coatings

The effects of Cr and B doping on the mechanical properties and tribological behavior of multi-layered hydrogenated diamond-like carbon films

Study on tribology and cutting performance of boron doped diamond composite coated tool

Investigation of mountainous laser texturing for improving the adhesion and tribological properties of AlCrN coatings

Tribological Behavior of Diamond-Like Carbon Film with Different Tribo-Pairs: A Size Effect Study

Effect of ion beam etching on the tribological performance of laser textured Co-Cr-Mo alloy

Additional Tribological Effect of Laser Surface Texturing and Diamond-Like Carbon Coating for Medium Carbon Steel at Near Room Temperature

Tribological Properties of Diamond-Like Carbon Films Deposited by Pulsed Laser Arc Deposition

Effect of laser texturing on the performance of ultra-hard single-point cutting tools

The Impact of Dopants (B, H) on the Mechanical Behavior and Tribological Performance of DLC Film under Water Lubrication

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Analysis of Wear Vibration Behavior of Micro-Textured Coated Cemented Carbide Considering High-Order Scale

Adhesion and machining performance of PVD AlCrN coatings with an ion beam/laser textured substrate

Effect of the interfacial microstructure on hardness of multi-layer diamond coatings

Combined effect of laser texturing and carburizing on the bonding strength of DLC coatings deposited on medical titanium alloy

Tribological Properties of Diamond Films and Graphite/diamond Composite Films with Dry Friction

Particle type effect on mechanisms of surface texturing in reducing wear

Controllable preparation of micro-textures on WC/Co substrate surface by an integrated laser-dry etching process for improving PVD coatings adhesion

High-temperature tribological properties of AlCrN coatings deposited on textured surfaces under dry friction