Abstract:<p>The micro-texture fabricated on the substrate surface of coatings is an established method for enhancing the Physical Vapor Deposition (PVD) coatings adhesion. Currently, laser micromachining is widely used to prepare the micro/nano-texture. Nevertheless, it has a problem of low processing accuracy, such as irregular texture edges and irregular protrusions inside the textures. Here, we propose an ion beam etching (IBE)-assisted laser machining approach to fabricate micro-texture, and the effect of IBE/laser textures on the PVD coatings adhesion is revealed for the first time. The profile evolution mechanism of the micro-textures on the cemented carbide during etching process was investigated. By IBE-assisted laser machining, a ring-shaped microholes array with high precision and controllability was fabricated on the cemented carbide substrate surface. Then, the textured substrates were coated with TiAlN materials using cathode arc-evaporation technique. The scratch tests and dry wear tests on the coatings with the textured substrates were carried out, demonstrating that the IBE/laser textured coatings exhibited higher adhesive strength compared to that of the untextured and laser textured ones. Thus, the IBE-assisted laser machining shows a great potential in the preparation of high precision micro-textures for enhancing PVD coatings adhesion.</p>

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to prepare micro - structures on the surface of cemented carbide substrates to improve the adhesion of physical vapor deposition (PVD) coatings. Specifically, the paper proposes an ion beam etching (IBE) - assisted laser processing method to prepare high - precision micro - structures and studies the influence of these micro - structures on the adhesion of PVD coatings. The traditional laser processing method has the problem of low processing precision when preparing micro - structures, such as irregular texture edges and irregular protrusions inside the texture, and these problems will affect the quality of the coating. Therefore, this paper aims to overcome these defects through the IBE - assisted laser processing technology, improve the precision and controllability of micro - structures, and thus enhance the adhesion of PVD coatings. The key points mentioned in the paper include: - **Background**: With the enhancement of environmental protection awareness and the increasingly strict environmental protection regulations, it is particularly important to develop a modern sustainable manufacturing model without pollution. As part of environmental protection awareness, dry cutting technology has become an important issue of global concern. In order to achieve dry cutting, improving the adhesion between PVD coatings and substrates is a key issue. - **Problem**: The traditional laser processing method has the problem of low processing precision when preparing micro - structures, resulting in a decline in coating quality. - **Solution**: A method of ion beam etching (IBE) - assisted laser processing is proposed. By combining laser pretreatment and IBE etching, high - precision micro - structures are prepared, thereby improving the adhesion of PVD coatings. - **Experimental method**: Use an Nd:YVO₄ laser to prepare a micropore array on the surface of a cemented carbide substrate, then etch it through IBE, and finally deposit a TiAlN coating on the surface of the substrate. Evaluate the adhesion and wear - resistant properties of the coating through scratch tests and dry - wear tests. Through this series of studies, the paper verifies the potential of the IBE - assisted laser processing technology in improving the adhesion of PVD coatings.

Controllable preparation of micro-textures on WC/Co substrate surface by an integrated laser-dry etching process for improving PVD coatings adhesion

Adhesion and machining performance of PVD AlCrN coatings with an ion beam/laser textured substrate

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Wettability-Oriented Laser Microgrooving Process on Cemented Carbide Surface

Effect of ion beam etching on the tribological performance of laser textured Co-Cr-Mo alloy

Fabrication of Interference Textures on Cemented Carbides Using Nanosecond and Femtosecond Laser Pulses

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

Study on surface properties of coated WC-Co alloy based on laser reduction process

Investigation of mountainous laser texturing for improving the adhesion and tribological properties of AlCrN coatings

Laser-induced concave/convex micro-textures array for enhancing performance of surface coatings: Bond coating in thermal barrier coating system

Preparation Technology and Properties of Microtexture Diamond-Coated Tools

Study on the surface performance strengthening of AlCrN coated cemented carbide by micro-texture laser preparation process

Fabrication of TiN Coatings Deposited on Laser Shock Micro-Textured Substrates for Improving the Interface Adhesion Properties of Coatings

Fabrication and tribological properties of textured diamond coatings on WC-Co cemented carbide surfaces

Analysis of Wear Vibration Behavior of Micro-Textured Coated Cemented Carbide Considering High-Order Scale

Effect of Scale and Sequence of Surface Textures on the Anti-adhesive Wear Performance of PVD Coated Tool in Dry Machining SLM-Produced Stainless Steel

The Effect of Laser Texture on Adhesion and Tribological Properties of Boron-Doped Diamond Film on WC-Co Cemented Carbide

Study on the substrate surface micro-texturing/carburizing regulating the film-substrate adhesion and wear behavior of DLC coatings

Alumina/GNPs coating on textured WC/Co substrate: microstructure and tribology

Diamond coatings on copper surfaces through interface engineering

Analysis of synergistic friction reduction effect on micro-textured cemented carbide surface by laser processing