Abstract:Frequency multiplying wireless transmitters (TX) employing harmonic injection-locked technique benefit from high energy efficiency and less hardware complexity but largely suffer from reference spurs that violate the TX spectral specifications. This work proposes a self-aligned phase-locked loop (PLL) in conjunction with harmonic injection locking technique to achieve significantly improved spur performance under ultra-low-power (ULP) operations for sub-GHz IoT TXs. The on-chip type-I PLL calibrates the phase error in the ring oscillator (RO) in real-time and avoids large spurs induced from the frequency deviation in the harmonic injection locking. A compact zero power consumption twin-T notch filter for spur suppression is implemented within the PLL loop to tackle the rail-to-rail voltage jump that comes from the output of the phase detector (PD). Designed and fabricated in the TSMC 180 nm CMOS process, the proposed frequency multiplying TX occupies an active area of only 0.0413 mm<sup>2</sup>. The lowest power consumption with >3X improved energy-efficiency is observed while consistently achieving >62 dB spur suppression with −14 dBm output at 915 MHz. The TX supports OOK modulation with an average power consumption of $200.9~mu text{W}$ only at 3 Mb/s data rate achieving a normalized 66.97 pJ/bit energy efficiency.

A 433MHz Transmitter Based on Injection-Locking and Frequency Multiplication

A Sub-100 $\mu$ W MICS/ISM Band Transmitter Based on Injection-Locking and Frequency Multiplication

A 3 Mw 54.6 GHz Divide-by-3 Injection Locked Frequency Divider with Resistive Harmonic Enhancement

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A 90µW MICS/ISM band transmitter with 22% global efficiency

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

A CMOS 135–150 GHz 0.4 dBm EIRP transmitter with 5.1dB P1dB extension using IF envelope feed-forward gain compensation

An 11 pJ/Bit Multichannel OOK/FSK/QPSK Transmitter With Multi-Phase Injection-Locking and Frequency Multiplication Techniques

An Ultra-Low-Power Injection Locked Transmitter for Wireless Sensor Networks

A 35 Pj/pulse Injection-Locking Based UWB Transmitter for Wirelessly-Powered RFID Tags

A 13 pJ/bit 900 MHz QPSK/16-QAM Band Shaped Transmitter Based on Injection Locking and Digital PA for Biomedical Applications

A 400MHz/900MHz Dual-Band Ultra-Low-Power Digital Transmitter for Biomedical Applications

A 9.4 Pj/bit 432 MHz 16-QAM/MSK Transmitter Based on Edge-Combining Power Amplifier

A Fully Integrated Low Power Transmitter in an 802. 11b Transceiver System

A 5.9mw 50mbps CMOS QPSK/O-QPSK Transmitter Employing Injection Locking for Direct Modulation

A Cmos 434/868 Mhz Fsk/Ook Transmitter With Integrated Fractional-N Pll

A 0.66mw 400 MHz/900 MHz Transmitter IC for In-Body Bio-Sensing Applications.

Spur Minimization Techniques for Ultra-Low-Power Injection-Locked Transmitters

A low power bandpass /spl Sigma/ /spl Delta/ modulator injection locked synthesizer

A 20 W W-band pulse solid-state transmitter using injection-locked compact cascaded power combining networks

A 60 Ghz Low Power Direct-Conversion Quadrature-Phase Transmitter In 130 Nm Cmos With Low Profile Cavity Backed Antenna