Abstract:The logging tool is the key downhole facility used for oil and gas exploration. A vacuum flask is indispensable for protecting the inside electronics of the logging tool from extreme working environments. During transport, assembly, or working processes, vacuum flask failure can lead to the destruction of the logging tool. The existing test methods are unable to detect vacuum failure quickly and accurately. To solve this problem, a rapid test method based on the variation in equivalent thermal conductivity before and after vacuum failure was proposed. First, the principle of this method was illustrated in detail, and a simplified 1D heat transfer model was calculated by the finite difference method. We found that the temperature rise ratio between the insulator and heat source (defined as P) can be used as the testing indicator with a 1 h testing time. Subsequently, a rapid test device was designed, and numerical simulations were performed to determine the critical values of the testing indicator for actual vacuum flasks. The simulated results showed that independent of the heating power and initial temperature, the P values for vacuum flasks in normal and abnormal states are 0.391 and 0.299, respectively, with a critical value of 0.351. Finally, experimental tests were conducted to test the effectiveness of the rapid test method and testing indicator. The experimental results showed that the measured P values of normal and abnormal vacuum flasks were above or below the critical value (Pe) under different test conditions, respectively, indicating that the proposed rapid test method can quickly and accurately detect vacuum failure. The maximum error between the simulated and experimental results was only 8.7%.

A Method for Measuring Interlayer Vacuum Degree of the Liquified Natural Gas Vacuum Multi-layer Insulation Pipe by Temperatures

A Vacuum Measurement Method of Liquefied Natural Gas Vacuum Pipeline Based on the Principle of Temperature Field.

Design and Application of Vacuum Test Bench for LNG Cryogenic Pipeline

A Method for Void Fraction Measurement of Bubble/slug Flow in Small Channels Based on Contactless Impedance Detection

Void Fraction Measurement Of Gas-Liquid Two-Phase Flow Based On (Cd)-D-4 Technique

A New Void Fraction Measurement Method for Gas-Liquid Two-Phase Flow in Small Channels.

Oil-Gas-Water Three-Phase Flow Measurement Based on the Theory of Partial Separation

An experimental setup for performance testing of multilayer insulation and preliminary inspection

Experimental study on thermal properties of vacuum insulation for steel jacketed heating pipeline

Thermal analysis of vacuum layer in steel jacketed vacuum insulated directly buried steam pipelines

Void Fraction Measurement Of Gas-Liquid Two-Phase Flow In Mini-Pipe Based On Image Sequence

Research on density measurement of liquefied natural gas storage tank based on computational fluid dynamics

Theoretical Analysis of Fuzzy Least Squares Support Vector Regression Method for Void Fraction Measurement of Two-Phase Flow by Multi-Electrode Capacitance Sensor

Design of Thermal Insulation for Lng Tanker

Reseach on Measuring of the Void Fraction of Gas-Liquid Two Phase Based on Infrared Technology

Characterization and monitoring of vacuum pressure of tank containers with multilayer insulation for cryogenic clean fuels storage and transportation

Measurement of Void Fraction in Vertically Rising Pipes by Using Optical Fiber Probes

A Time-Saving Method to Evaluate the Thermal Insulation Performance of Cryogenic Vessels

Rapid Detection of the Vacuum Failure of Logging Tools Based on the Variation in Equivalent Thermal Conductivity

Void Fraction Measurement of Stratified Gas-Liquid Flow Based on Multi-Wire Capacitance Probe

Thermal analysis of steel -jacketed vacuum insulated heating pipeline