Abstract:Amorphous SiBCN ceramics are a unique class of structure materials with potential applicationsas high-temperature heat-resistant structural components owing to their combination of special structure and properties of low specific weight, high specific strength and excellent damage tolerance at elevated temperatures. However, it is still in need for further mechanical properties improvements for actual demands by rational co-design of architecture and chemistry as well as understanding the basic features of morphological/microstructural evolution and failure behavior. Thus in this attempt, to target the dense amorphous Si2ByC2N (y=1.5～4) monoliths with high mechanical properties, an attractive way of combinatorial mechanical alloying and high-pressure sintering technique (1000 oC/3～5 GPa/30 min) was proposed using elemental powders of graphite, hexagonal BN, cubic Si and boron as raw materials. The sintering pressure induced microstructural evolution, phase transformation and thermal stability have been investigated by XRD, SEM, TEM and TG measurements, and mechanical performance, especially the fracture behavior was also discussed in details. Results clearly presented that an increase in sintering pressure promoted the phase transformation of completely amorphous matrix to a hybrid structure of substantial amorphous phases and few nanocrystals of metal c-Si and/or t-BN(C) for some monoliths, implying boron-content depending phase composition. High-pressure sintering effectively promoted the densification leading to free volume annihilation and the river-like fracture morphology occurrence. A monotonous increase of the bulk density, nano hardness and Young's modulus as a function of the sintering pressure was observed. Under the same sintering conditions, the increase in boron content weakened the mechanical properties and thermal stability of the amorphous Si2ByC2N (y=1.5～4) monoliths. Dense amorphous Si2B1.5C2N monoliths consolidated at 1000 oC/5 GPa/30 min showed the best performance with the bulk density, nano hardness and Young's modulus obtaining at 2.69 g/cm3, 33.6±2.2 GPa and 414.2±16.5 GPa, respectively.

Design and Composite Preparation of Sibcn Amorphous Ceramics Based on Self-Crosslinking Technology

High Boron Content and Soluble Polyborosilazanes to Amorphous SiBCN Ceramics

Progress of a Novel Amorphous and Nanostructured Si-B-C-N Ceramic and Its Matrix Composites Prepared by an Inorganic Processing Route

Polyborosilazane with Broadly Tunable Boron Content for SiBCN Ceramics

Composition-dependent Structural Characteristics and Mechanical Properties of Amorphous SiBCN Ceramics by Ab-Initio Calculations

Polymer derived SiBCN(O) ceramics with tunable element content

Boron‐dependent Microstructural Evolution, Thermal Stability, and Crystallization of Mechanical Alloying Derived SiBCN

Preparation And Characterization Of Polymer-Derived Sibonc Bulk Ceramics By Polymer-Drived Precursor Method

Boron-dependent self-healing behavior and mechanical properties of polymer-derived amorphous SiBCN monoliths

Microstructure evolution and phase transformation of amorphous BCN–SiC composites prepared by two synthetic routes

Progress of Fabrication and Properties for SiBCN Composite Ceramics

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Microstructural evolution and mechanical performance of high-pressure sintered dense amorphous SiBCN monoliths

High-pressure Synthesis, Mechanical Properties and Oxidation Behavior of Advanced Boron-Containing Α/β-Si 3N 4/si Ceramics Using Polymer-Derived Amorphous SiBN Ceramics

Effect of boron content on the microstructure and electromagnetic properties of SiBCN ceramics

A Novel In Situ Synthesis Of Sibcn-Zr Composites Prepared By A Sol-Gel Process And Spark Plasma Sintering

Pseudo low-temperature sintering effect and microstructure evolution of SiBCO ceramics

Effect of Boron Carbide on the Liquid Silicon Infiltration and Performance Enhancement of Reaction-Bonded Silicon Carbide Composites

Modification of SiBCN by Zr Atom and Its Effect on Ablative Resistance of Cf/SiBCN(Zr) Composites

New Progress in the Preparation of Sintering and Application of Boron Carbide Ceramics

Fabrication of Dense SiBCN Monolith at a Lower Temperature Andits High-Temperature Performance