Abstract:The volume fraction and stabilization of retained austenite at room temperature were determined by the degree of stable element partitioning of austenite. The element diffusion behaviors usually had a close relationship with crystal defects, and dislocation multiplication caused by high temperature deformation might also increase the vacancy concentration, which contributed to the diffusion of substitutional atoms and interstitial atoms. By adopting a new treatment process of intercritical deformation-hold-quenching (DIQ), the effect of Mn partitioning and the structure evolution of bainite under the deformation in intercritical area were studied. The microstructure, dislocation density and distribution of alloy elements, especially the volume fraction of retained austenite, were characterized by means of OM, SEM, TEM, EPMA and XRD. The results indicated that the grains of ferrite and the lathes of martensite were refined, the number of the block martensite was decreased, and dislocation density was increased from 0.36x10(14) m(-2) to 1.20x10(14) m(-2) after deformation. The mutual movement of dislocation slip increased vacancy concentration and the number of interstitial solute atoms, accelerated the diffusive rate of C atoms and Mn atoms from alpha phase to gamma phase, and promoted the partitioning effect of Mn element in the critical region. Eventually, the contents and areas of C and Mn enrichment were increased. By adopting the process of intercritical deformation-hold-austenitizing-quenching-partitioning in bainitic region-quenching (DI&Q&PB), the volume fraction of retained austenite was increased from 11.5% to 13.9%, and the carbon content in retained austenite was increased from 1.14% to 1.28%.

Microstructure Features and Carbon Partitioning in Low Temperature Bainitic Steels: the Effect of Magnetic Field

An integrated exploration from microstructure to mechanics in austenite to pearlite transformation of high carbon steel under high magnetic fields

Effects of high magnetic field on isothermal pearlite transformation and microstructure in a hypereutectoid steel

New Microstructural Features Occurring During Transformation from Austenite to Ferrite under the Kinetic Influence of Magnetic Field in A Medium Carbon Steel

Three-dimensional morphology and crystallographic characteristics of the low-temperature bainitic microstructure in high-carbon steel

Effects of high magnetic field on austenite formation and grain size in a hypereutectoid carbon steel

Inner connection of bainite and pearlite transformation in steels

Experimental and theoretical analysis of multiphase microstructure in a newly designed MnSiCrC quenched and partitioned steel to promote bainitic transformation: The significant impact on mechanical properties

Effect of the cooling rate in the medium temperature zone on the phase transformation and microstructure of carbide-free bainitic steel

Dynamic continuous cooling transformation, microstructure and mechanical properties of medium-carbon carbide-free bainitic steel

Effect of Pulsed Magnetic Field on Retained Austenite of Quenched 8cr4mo4v Steel under Cryogenic Condition

Low Temperature Tempering of a Medium Carbon Steel in High Magnetic Field

Effect of alternating magnetic field on microstructure evolution and mechanical properties of M50 bearing steel during tempering process

Effect of Magnetic Field on Solidification Structure of A Centrifugal Cast High Speed Steel Roll

Effect of Bainite Microstructure Types on Mechanical Properties of Low-carbon Si-Mn Steel

Investigation of microstructural evolution and bainite transformation kinetics of multi-phase steel

Effect of High Magnetic Field on Precipitation Behaviors and Mechanical Properties in Reduced Activation Steels

Effect of Intercritical Dislocation Multiplication to Mn Partitioning and Microstructure Evolution of Bainite in Low Carbon Steel

Mechanism of Formation and Characteristics of Microstructure of Novel Nanobainitic Steel

Effect of External Magnetic Field on the Microstructure and Properties of High-Speed Steel Roller by Centrifugal Casting

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel