Abstract:Herein, the cryogenically martensitic transformation and its effects on the tempering behaviors of bearing steel was investigated. An in-situ magnetic method was used for obtaining the thermodynamics of the martensitic transformation at sub-zero Celsius temperature from in respects of athermal and isothermal conditions. Microstructure evolution was also characterized systematically to investigate the mechanisms of the martensitic transformation. The results showed that the athermally martensitic transformation of samples experienced three different stages, where the martensite formed slowly at 300–230 K, rapidly at 230–120 K, and slowly again at 120–77 K during the continuous cooling process. With the increase of cooling rate, both the start and finish temperatures of the transformation rise, while the maximum transformed rate decreases. The content of retained austenite transformed isothermally is much smaller as compared to the athermal condition. The amount of isothermally formed martensite does not show linear relationship with the temperature, where an optimal isothermal temperature for GCr15 steel is 193 K in this work. XRD measurement result showed that the content of retained austenite decreased with the decrease of treating temperature in practical DCT, where the content was reduced up to 4.2% after DCT at the lowest temperature combined with tempering. DCT enhanced the precipitation of θ-carbides during tempering and altered the precipitation behavior by advancing the precipitated temperature of θ-carbides from 340 °C to 315 °C. The tempered hardness of samples was improved by DCT, which can be attributed to the enhanced carbides precipitation during tempering and lower content of retained austenite after DCT. The improvement was also affected by tempering and austenitizing temperatures. It was concluded that the performance improvement induced by DCT was most evident if DCT was conducted between higher temperature quenching and lower temperature tempering. DCT also affected the decomposition of retained austenite during tempering by decreasing the activation energy of decomposition by up to 38.13 KJ/mol, which indicated a lower thermal stability of retained austenite after DCT. Microstructure observation indicated that the substructure of the new formed martensite was dominated by ultra-fine twins, which derived from the accommodated strain induced by martensitic transformation during DCT. The transformation strain induced by DCT also causes more dislocations in the microstructure, which provides more nucleation sites for the precipitation of θ-carbides during tempering.

Low Temperature Tempering of a Medium Carbon Steel in High Magnetic Field

Effect of Magnetic Field on Interfacial Energy and Precipitation Behavior of Carbides in Reduced Activation Steels

Effect of High Magnetic Field on Precipitation Behaviors and Mechanical Properties in Reduced Activation Steels

Magnetic Field-Induced Precipitation Behaviors of Alloy Carbides M2C, M3C, and M6C in a Molybdenum-Containing Steel

Effect of alternating magnetic field on microstructure evolution and mechanical properties of M50 bearing steel during tempering process

New Microstructural Features Occurring During Transformation from Austenite to Ferrite under the Kinetic Influence of Magnetic Field in A Medium Carbon Steel

Evolution and Coarsening of Carbides in 2.25Cr-Lmo Steel Weld Metal During High Temperature Tempering

Effect of Tempering Temperature and Carbide Free Bainite on the Mechanical Characteristics of a High Strength Low Alloy Steel

Effects of Tempering Temperature on the Microstructure, Strength, and Toughness of Medium-Carbon Ti–Mo-Bearing Martensitic Steel

An integrated exploration from microstructure to mechanics in austenite to pearlite transformation of high carbon steel under high magnetic fields

Tempering influence on microstructural evolution and mechanical properties in a core of CSS-42L bearing steel

Characterization of Carbide Precipitation During Tempering for Quenched Dievar Steel

Effects of high magnetic field on austenite formation and grain size in a hypereutectoid carbon steel

Magnetic Field Induced Twins in Martensite and Their Effect on Subsequent Cementite Precipitation in Fe–0.32 Wt-%C Steels

Effect of Tempering Conditions on Secondary Hardening of Carbides and Retained Austenite in Spray-Formed M42 High-Speed Steel

Cryogenically martensitic transformation and its effects on tempering behaviors of bearing steel

Effect of Quenching and Tempering Treatment on Microstructure and Mechanical Properties of CSS-42L Bearing Steel

Regulation Law of Tempering Cooling Rate on Toughness of Medium-Carbon Medium-Alloy Steel

Strengthening of Low Carbon Steel by Nano-sized Vanadium Carbide in Ferrite and Tempered Martensite

Effect of Magnetic Field on Solidification Structure of A Centrifugal Cast High Speed Steel Roll

The effect of tempering temperature on the microstructure and electrochemical properties of a 13wt.% Cr-type martensitic stainless steel