Abstract:The crystallography and structure of the interfaces formed between refined hexagonal close packed (hcp) alpha precipitates and the body centered cubic (bcc) beta matrix in a solution-treated and quenched metastable beta titanium alloy, Ti-5Al-5Mo-5V-3Cr (wt%, Ti-5553), were investigated after heating to 600 degrees C and subsequently aging for 0 and 30 min, respectively. The two phases adopted the classical Burgers orientation, and the observed interfacial structures were analyzed using a topological model, i.e. they contained disconnections, as well as beta crystal lattice dislocations acting as a lattice invariant deformation (LID). The structure of the alpha/beta interface was observed along two mutually perpendicular directions, in high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Viewed along the [0001](alpha):[110](beta) directions, an array of disconnections was observed to accommodate the misfit between the alpha and beta crystals. While the spacing of these disconnections varied, the step height associated with them was always twice the {112}(beta) interplanar spacing, and their Burgers vector b was [-0.0190.019 0.034](beta). When the interface was viewed along the [(11) over bar 20](alpha) : [110](beta) direction, in the sample aged for 0 min at 600 degrees C the misfit between the two lattices along [0001](alpha):[110](beta) was so small that no misfit or lattice invariant dislocations were observed within the field of view, in contrast with the interface structure reported in other more conventional titanium alloys. After aging the sample for 30 min, however, the interfacial structure equilibrated, and crystal lattice dislocations were observed on the terrace planes, accommodating the LID, with b = 1/2[(111) over bar](beta). Growth of the alpha precipitates is shown to occur principally by the emission of disconnections from the tip of the existing alpha precipitates into the beta matrix, and its resulting conversion to alpha. These results, combined with analysis using the topological model, show that the nucleation and growth of the hcp alpha phase from the bcc beta matrix in this alloy can be described in terms of the motion of disconnections, accompanied by the displacive diffusion necessary to accommodate the differences in composition between the alpha and beta phases. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Characterization of Nanoscale Twin Boundary Structure in Metastable Β Titanium Alloys Using Aberration-corrected Scanning Transmission Electron Microscopy

Characterization of Nano-scale Instabilities in Titanium Alloys Using Aberration-Corrected Scanning Transmission Electron Microscope

In Situ Nanomechanical Testing of Twinned Metals in a Transmission Electron Microscope

Characterization of Alpha/Beta Interface Structure in a Titanium Alloy Using Aberration-Corrected Scanning Transmission Electron Microscope

Exploration of Novel Nano-scale Instabilities in Metastable Beta Titanium Alloys Using Transmission Electron Microscopy and Aberration-Corrected Scanning Transmission Electron Microscopy

Unstable Twin In Body-Centered Cubic Tungsten Nanocrystals

Exploration of Nano-scale Structural Instabilities in Metastable Β Titanium Alloys Using Advanced Electron Microscopy

Study on the Relationship Between Microstructure and Mechanical Property in a Metastable Β Titanium Alloy

Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning, and grain refinement

Using transmission Kikuchi diffraction to characterise α variants in an α + β titanium alloy

Phase transformation generating coherent twin boundaries in titanium alloys

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Nano-scale Structural Non-Uniformities in Gum Like Ti-24Nb-4Zr-8Sn Metastable Β-Ti Alloy

Electron Microscopy Study of Deformation Microstructure in Metastable Β Titanium Alloy

The Role of Nano-Scaled Structural Non-Uniformities on Deformation Twinning and Stress-Induced Transformation in a Cold Rolled Multifunctional Β-Titanium Alloy

Molecular Dynamics Simulation of Microstructure Evolution During the Fracture Process of Nano-Twinned Ag

Determination of the Structure of Α-Β Interfaces in Metastable Β-Ti Alloys

Experimental and DFT characterization of interphase boundaries in titanium and the implications for ω-assisted α phase precipitation

The Role of High-Index Twinning on Hierarchical Α Microstructure in a Metastable Β Ti-5Al-5Mo-5V-3Cr Alloy

Atomic Resolution Studies of the (K, Na)NbO3/SrTiO3 Interface Using Aberration Corrected STEM

The Effect of Alloy Composition on Instabilities in the Β Phase of Titanium Alloys