Abstract:Diesel engines are the predominant power source for the trucking industry. Heavy-duty trucks carry more than 70% of all goods transported across the United States. Atmospheric conditions vary with altitude but are critical to diesel engine performance, efficiency, and emissions. Existing studies have reported reduced thermal efficiency and increased emissions when truck engines were operated at high altitudes. Since heat loss is a key parameter related to engine efficiency, the goal of this paper was to investigate the altitude impacts on the in-cylinder heat transfer characteristics. Experiments on a single-cylinder four-stroke heavy-duty diesel engine were conducted at a constant speed and load, but with different intake pressures to simulate the varying atmospheric conditions at different altitudes. The quantity of diesel fuel injected into the cylinder per cycle was increased to maintain the same power output at decreased atmospheric pressure and to compensate for the combustion deterioration that occurred inside the cylinder. Experimental results showed that the bulk temperature was higher at high altitudes because of less mass of the mixture trapped in the cylinder. Such a large temperature difference between the hot products and the cold walls increased the in-cylinder heat transfer to the coolant, especially during combustion. Specifically, the 2000 m altitude rise led to an increase in heat loss to the atmosphere of similar to 2% per cycle under full load conditions. As a result, the application of thermal coatings to improve fuel economy is even more necessary in high altitude states, such as Colorado and Wyoming.

Experimental Study on the Energy Flow of a Commercial Heavy-Duty Vehicle under the C-WTVC of Cold and Warm Start

Simulation and Experimental Comparison of Fuel Consumption for a Heavy-duty Diesel Vehicle

An Experimental Study on the Measures for Improving Cold Start/Warm-up Process of Engine

Investigation of the Effect of Altitude on In-Cylinder Heat Transfer in Heavy-Duty Diesel Engines Based on an Empirical Model

Assessment of Energy Consumption Characteristics of Ultra-Heavy-Duty Vehicles under Real Driving Conditions

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

Effect of Altitude on In-Cylinder Heat Transfer of a Heavy Duty Diesel Engine

Using a Chassis Dynamometer to Determine the Influencing Factors for the Emissions of Euro VI Vehicles

Experiment and simulation investigation on energy management of a gasoline vehicle and hybrid turbocharger optimization based on equivalent consumption minimization strategy

Theoretical analysis on energy saving of cold energy utilization system for a liquid hydrogen heavy-duty truck

Electromagnetic Valve Train for Gasoline Engine Exhaust System

Experiment and simulation study on energy flow characteristics of a battery electric vehicle throughout the entire driving range in low-temperature conditions

Research on Influence of Beijing-VI Diesel on Consumption and Emission Characteristics of Euro VI Diesel Bus

Simulation and Experimental Study on Thermal State of Engine Compartment of Commercial Vehicle

Study of In-Cylinder Heat Transfer Boundary Conditions for Diesel Engines under Variable Altitudes Based on the CHT Model

Development of in-use engine speed/torque heat maps across multiple heavy-duty commercial vehicle vocations

Numerical study on the performance, combustion characteristics and energy flow distribution of gasoline-powered vehicle under synthetic actual driving test cycle

Technology Development Analysis on Low Carbon for Power of Heavy-Duty Commercial Vehicle

Effective measures to improve thermal efficiency of medium-sized diesel engine in practical application: Energy-exergy analysis and test verification

Modeling Heavy-Duty Engine Thermal Management Technologies to Meet Future Cold Start Requirements

Experimental Study of the Influences of Operating Parameters on the Performance, Energy and Exergy Characteristics of a Turbocharged Marine Low-Speed Engine