Abstract:High nitrogen oxide levels of the conventional diesel engine combustion often requires the introduction of exhaust gas recirculation at high engine loads. This can adversely affect the smoke emissions and fuel conversion efficiency associated with a reduction of the in-cylinder air-fuel ratio (lambda). In addition, low exhaust gas temperatures at low engine loads reduce the effectiveness of aftertreatment systems necessary to meet stringent emissions regulations. These are some of the main issues encountered by current heady-duty diesel engines. In this work, variable valve actuation–based advanced combustion control strategies have been researched as means of improving upon the engine exhaust temperature, emissions, and efficiency. Experimental analysis was carried out on a single-cylinder heady-duty diesel engine equipped with a high-pressure common-rail fuel injection system, a high-pressure loop cooled exhaust gas recirculation, and a variable valve actuation system. The variable valve actuation system enables a late intake valve closing and a second intake valve opening during the exhaust stroke. The results showed that Miller cycle was an effective technology for exhaust temperature management of low engine load operations, increasing the exhaust gas temperature by 40 °C and 75 °C when running engine at 2.2 and 6 bar net indicated mean effective pressure, respectively. However, Miller cycle adversely effected carbon monoxide and unburned hydrocarbon emissions at a light load of 2.2 bar indicated mean effective pressure. This could be overcome when combining Miller cycle with a second intake valve opening strategy due to the formation of a relatively hotter in-cylinder charge induced by the presence of internal exhaust gas recirculation. This strategy also led to a significant reduction in soot emissions by 82% when compared with the baseline engine operation. Alternatively, the use of external exhaust gas recirculation and post injection on a Miller cycle operation decreased high nitrogen oxide emissions by 67% at a part load of 6 bar indicated mean effective pressure. This contributed to a reduction of 2.2% in the total fluid consumption, which takes into account the urea consumption in aftertreatment system. At a high engine load of 17 bar indicated mean effective pressure, a highly boosted Miller cycle strategy with exhaust gas recirculation increased the fuel conversion efficiency by 1.5% while reducing the total fluid consumption by 5.4%. The overall results demonstrated that advanced variable valve actuation–based combustion control strategies can control the exhaust gas temperature and engine-out emissions at low engine loads as well as improve upon the fuel conversion efficiency and total fluid consumption at high engine loads, potentially reducing the engine operational costs.

Electromagnetic Valve Train for Gasoline Engine Exhaust System

Analysis of the Advantages of Electromagnetic Control Fully Variable Valve Actuation System on the Basis of Simulation

Kinetic behavior evaluation of electromagnetic valve train subject to exhaust gas force

Optimal Trajectory Planning of Electromagnetic Valve-Train Based on Multiple Algorithms for Improving Engine Performance

Research on New Type of Fast-Opening Mechanism in Steam Turbine Regulating System and Optimization of Operation Tactic

Development of an Ε-Type Actuator for Enhancing High-Speed Electro-Pneumatic Ejector Valve Performance

Study on Electromagnetic Force of the New Micro Digital Valve

Measurement and modelling of a linear electromagnetic actuator driven camless valve train for spark ignition IC engines under full load condition

Virtual design of rigidity for valve train system in internal combustion engine

Basic study on high precision positioning in electromagnetic valve drive system for improving internal combustion engine using linear actuator

Performance Optimization of Diesel Engine with Electro-Hydraulic Driven Valves

Variable valve actuation for efficient exhaust thermal management in an off-road diesel engine

Precise motion control of an electromagnetic valve actuator with adaptive robust compensation of combustion force

Transient Control of Electro-Hydraulic Fully Flexible Engine Valve Actuation System

Power and fuel economy optimizations of gasoline engines using hydraulic variable valve actuation system

Design and Implementation of a Linear Active Disturbance Rejection Control-Based Position Servo Control System of an Electromotive Valve for Exhaust Gas Recirculation

Research on Variable Valve System Based on Electro-Hydraulic Drive

Electro-hydraulic Variable Valve System for Hybrid Pneumatic-Internal Combustion Engine

Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine

Numerical and Experimental Study on Knock Sources in Spark Ignition Engine with Electromagnetic Valve Train

Electromagnetic‐Thermal Analysis of High‐Temperature Direct Drive Electric‐Actuated Valve Canned Permanent Magnet Synchronous Motor