Abstract:High nitrogen oxide levels of the conventional diesel engine combustion often requires the introduction of exhaust gas recirculation at high engine loads. This can adversely affect the smoke emissions and fuel conversion efficiency associated with a reduction of the in-cylinder air-fuel ratio (lambda). In addition, low exhaust gas temperatures at low engine loads reduce the effectiveness of aftertreatment systems necessary to meet stringent emissions regulations. These are some of the main issues encountered by current heady-duty diesel engines. In this work, variable valve actuation–based advanced combustion control strategies have been researched as means of improving upon the engine exhaust temperature, emissions, and efficiency. Experimental analysis was carried out on a single-cylinder heady-duty diesel engine equipped with a high-pressure common-rail fuel injection system, a high-pressure loop cooled exhaust gas recirculation, and a variable valve actuation system. The variable valve actuation system enables a late intake valve closing and a second intake valve opening during the exhaust stroke. The results showed that Miller cycle was an effective technology for exhaust temperature management of low engine load operations, increasing the exhaust gas temperature by 40 °C and 75 °C when running engine at 2.2 and 6 bar net indicated mean effective pressure, respectively. However, Miller cycle adversely effected carbon monoxide and unburned hydrocarbon emissions at a light load of 2.2 bar indicated mean effective pressure. This could be overcome when combining Miller cycle with a second intake valve opening strategy due to the formation of a relatively hotter in-cylinder charge induced by the presence of internal exhaust gas recirculation. This strategy also led to a significant reduction in soot emissions by 82% when compared with the baseline engine operation. Alternatively, the use of external exhaust gas recirculation and post injection on a Miller cycle operation decreased high nitrogen oxide emissions by 67% at a part load of 6 bar indicated mean effective pressure. This contributed to a reduction of 2.2% in the total fluid consumption, which takes into account the urea consumption in aftertreatment system. At a high engine load of 17 bar indicated mean effective pressure, a highly boosted Miller cycle strategy with exhaust gas recirculation increased the fuel conversion efficiency by 1.5% while reducing the total fluid consumption by 5.4%. The overall results demonstrated that advanced variable valve actuation–based combustion control strategies can control the exhaust gas temperature and engine-out emissions at low engine loads as well as improve upon the fuel conversion efficiency and total fluid consumption at high engine loads, potentially reducing the engine operational costs.

Variable valve actuation for efficient exhaust thermal management in an off-road diesel engine

Implementing variable valve actuation on a diesel engine at high-speed idle operation for improved aftertreatment warm-up

Diesel engine optimization and exhaust thermal management by means of variable valve train strategies

Electromagnetic Valve Train for Gasoline Engine Exhaust System

Variable Valve Strategy Evaluation for Low-Load Operation in a Heavy-Duty Gasoline Compression Ignition Engine

Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

Variable geometry turbocharging for lower emissions and improved torque characteristics

Enhanced Exhaust after-Treatment Warmup in a Heavy-Duty Diesel Engine System via Miller Cycle and Delayed Exhaust Valve Opening

Power and fuel economy optimizations of gasoline engines using hydraulic variable valve actuation system

Predictive GT-Power Simulation for VNT Matching on a 1.6 L Turbocharged GDI Engine

Different exhaust temperature management technologies for heavy-duty diesel engines with regard to thermal efficiency

Effects of a Dual-Loop Exhaust Gas Recirculation System and Variable Nozzle Turbine Control on the Operating Parameters of an Automotive Diesel Engine

Assessment of a synergistic control of intake and exhaust VVT for airflow exchange, combustion, and emissions in a DI hydrogen engine

Evaluation of thermal management technologies for fuel efficient cold-start emissions reduction in diesel engines

Enabling off-highway diesel engine downsizing and performance improvement using electrically assisted turbocharging

Exploring alternative combustion control strategies for low-load exhaust gas temperature management of a heavy-duty diesel engine

Exhaust Energy Recovery with Variable Geometry Turbine to Reduce Fuel Consumption for Microcars

Turbocharging strategy among variable geometry turbine, two-stage turbine, and asymmetric two-scroll turbine for energy and emission in diesel engines

Utilizing Exhaust Valve Opening Modulation for Fast Warm-up of Exhaust After-treatment Systems on Highway Diesel Vehicles

Modeling Heavy-Duty Engine Thermal Management Technologies to Meet Future Cold Start Requirements