Abstract:Indentation type dynamic mechanical analysis (IT-DMA) is an attractive approach to characterizing viscoelastic properties of soft matter under both quasi-static and dynamic loadings. Frequency-dependent viscoelastic properties are usually characterized by storage and loss moduli whereas extracting inherent viscoelastic model parameters from dynamic loadings remains unsolved. In this study, closed-form solutions to dynamic oscillation loadings were first derived and adapted to a variety of excitations for arbitrary shape indenters. A uniform theoretical framework for ramp-hold-oscillation-relaxation/creep indentation tests are established and Kelvin-Voigt fractional derivative (KVFD) solutions are presented to predict the viscoelastic behavior for both quasi-static loadings (creep, relaxation) and dynamic loadings (sinusoidal displacement/force cycles at 5,10,15,20,30 Hz). Four gelatin-cream hydrogel samples were investigated under ramp-hold-oscillation-relaxation and ramp-hold-oscillation-creep testing conditions. Viscoelastic quantities of elasticity E0, fluidity α, and viscosity τ were extracted by fitting the experimental curves to KVFD predictions. The results show that KVFD models can accurately depict the viscoelastic behavior under both dynamic and quasi-static loadings with high goodness of fit (R2>0.936). To assess the proposed method, comparison of the viscoelastic quantities from different experimental protocols were conducted. Statistical results revealed viscoelastic parameters from different loading are in close agreement. For dynamic loadings, significant differences were found for [E0, α] estimates at different frequencies. For different experimental protocols, estimations were consistent in that E0 showed maximum value on Gel5Cream15 sample, and α was increased with increasing cream percentage. Moreover, viscoelastic quantities extracted from dynamic relaxation were correlated with those of the dynamic creep (r=0.977, p<0.001 for E0, and r=0.969, p<0.001 for α). Viscoelastic quantities from quasi-static relaxation were highly correlated with those from quasi-static creep (r=0. 910, p<0.001 for E0, and r=0.979, p<0.001 for α). The complex modulus from KVFD estimations was found to be correlated with that of the DMA measurement (for dynamic relaxation, r=0.603, p<0.001 for E′ and r=0.818, p<0.001 for E″; for dynamic creep, r=0.756, p<0.001 for E′ and r=0.762, p<0.001 for E″). Cross validation and assessment by alternative DMA method confirmed that KVFD solutions provided a method for relating viscoelastic measurements at load frequencies from quasi-static to dynamic for soft viscoelastic tissue-like materials.

Study on the Testing Method of Relaxation Modulus under Spherical Indenter Loading

An Elementary Formula for Initial Relaxation Modulus from the Creep Compliance of Various Viscoelastic Model

Research of Method for Solving Relaxation Modulus Based on Three-Point Bending Creep Test

Geometry Independence of the Normalized Relaxation Functions of Viscoelastic Materials in Indentation

Indentation Creep Tests to Assess the Viscoelastic Properties of Soft Materials: Theory, Method and Experiment

Study on Conversion Between Creep Compliance and Relaxation Modulus of Asphalt Mixture

Influence of Thermoviscoelastic Properties and Loading Conditions on the Recovery Performance of Shape Memory Polymers

Ramp-hold relaxation solutions for the KVFD model applied to soft viscoelastic media

Indentation Method for Measuring the Viscoelastic Kernel Function of Nonlinear Viscoelastic Soft Materials

Measuring the Young’s Relaxation Modulus of PDMS Using Stress Relaxation Nanoindentation

Viscoelasticity in simple indentation-cycle experiments: a computational study

Solutions to ramp-hold dynamic oscillation indentation tests for assessing the viscoelasticity of hydrogel by Kelvin-Voigt fractional derivative modeling

Constitutive Equations for Analyzing Stress Relaxation and Creep of Viscoelastic Materials Based on Standard Linear Solid Model Derived with Finite Loading Rate

An Elementary Formula for the Initial Relaxation Modulus from the Creep Compliance for Asphalt Mixtures

Extracting the isotropic uniaxial stress-strain relationship of hyperelastic soft materials based on new nonlinear indentation strain and stress measure

Conversion from Shear Creep Compliance to Relaxation Modulus of Asphalt Binder Using Cauchy Residue Method and Experimental Validation

Theoretical and Computational Modelling of Instrumented Indentation of Viscoelastic Composites

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

An Experimental Study on the Contact Problem of Spherical Indentation on the Anisotropic Elastic Half-Space Based on Imaging

Analysis of Frictionless Contact between a Spherical Indenter and a Poroviscoelastic Medium with a Constant Contact Radius

Loading Measurement for Intermediate Strain Rate Material Test Based on Dynamic Oscillation