Abstract:Indentation type dynamic mechanical analysis (IT-DMA) is an attractive approach to characterizing viscoelastic properties of soft matter under both quasi-static and dynamic loadings. Frequency-dependent viscoelastic properties are usually characterized by storage and loss moduli whereas extracting inherent viscoelastic model parameters from dynamic loadings remains unsolved. In this study, closed-form solutions to dynamic oscillation loadings were first derived and adapted to a variety of excitations for arbitrary shape indenters. A uniform theoretical framework for ramp-hold-oscillation-relaxation/creep indentation tests are established and Kelvin-Voigt fractional derivative (KVFD) solutions are presented to predict the viscoelastic behavior for both quasi-static loadings (creep, relaxation) and dynamic loadings (sinusoidal displacement/force cycles at 5,10,15,20,30 Hz). Four gelatin-cream hydrogel samples were investigated under ramp-hold-oscillation-relaxation and ramp-hold-oscillation-creep testing conditions. Viscoelastic quantities of elasticity E0, fluidity α, and viscosity τ were extracted by fitting the experimental curves to KVFD predictions. The results show that KVFD models can accurately depict the viscoelastic behavior under both dynamic and quasi-static loadings with high goodness of fit (R2>0.936). To assess the proposed method, comparison of the viscoelastic quantities from different experimental protocols were conducted. Statistical results revealed viscoelastic parameters from different loading are in close agreement. For dynamic loadings, significant differences were found for [E0, α] estimates at different frequencies. For different experimental protocols, estimations were consistent in that E0 showed maximum value on Gel5Cream15 sample, and α was increased with increasing cream percentage. Moreover, viscoelastic quantities extracted from dynamic relaxation were correlated with those of the dynamic creep (r=0.977, p<0.001 for E0, and r=0.969, p<0.001 for α). Viscoelastic quantities from quasi-static relaxation were highly correlated with those from quasi-static creep (r=0. 910, p<0.001 for E0, and r=0.979, p<0.001 for α). The complex modulus from KVFD estimations was found to be correlated with that of the DMA measurement (for dynamic relaxation, r=0.603, p<0.001 for E′ and r=0.818, p<0.001 for E″; for dynamic creep, r=0.756, p<0.001 for E′ and r=0.762, p<0.001 for E″). Cross validation and assessment by alternative DMA method confirmed that KVFD solutions provided a method for relating viscoelastic measurements at load frequencies from quasi-static to dynamic for soft viscoelastic tissue-like materials.

Geometry Independence of the Normalized Relaxation Functions of Viscoelastic Materials in Indentation

Indentation Method for Measuring the Viscoelastic Kernel Function of Nonlinear Viscoelastic Soft Materials

Theoretical and Computational Modelling of Instrumented Indentation of Viscoelastic Composites

Viscoelasticity in simple indentation-cycle experiments: a computational study

Measuring the Young’s Relaxation Modulus of PDMS Using Stress Relaxation Nanoindentation

Measuring elastic parameters of transversely isotropic materials by cylindrical indentation

The Indentation Elastic Response - Indentation Shape and the Stress Distribution

Indentation Creep Tests to Assess the Viscoelastic Properties of Soft Materials: Theory, Method and Experiment

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Extracting the isotropic uniaxial stress-strain relationship of hyperelastic soft materials based on new nonlinear indentation strain and stress measure

Relationship of Stiffness-Based Indentation Properties Using Continuous-Stiffness-Measurement Method

Effect of the curvature for the indented solid with curved surface using flat punch indentation

Numerical Analysis of Indentation of an Elastic Hemispherical Shell

Spherical Indentation Method for Determining the Constitutive Parameters of Hyperelastic Soft Materials

Ramp-hold relaxation solutions for the KVFD model applied to soft viscoelastic media

Mechanical characterization of soft viscoelastic gels via indentation and optimization-based inverse finite element analysis

Solutions to ramp-hold dynamic oscillation indentation tests for assessing the viscoelasticity of hydrogel by Kelvin-Voigt fractional derivative modeling

Measurement of Viscoelastic Properties for Polymers by Nanoindentation

The Use Of Flat Punch Indentation To Determine The Viscoelastic Properties In The Time And Frequency Domains Of A Soft Layer Bonded To A Rigid Substrate

An Approximate Solution of the Spherical Indentation on a Generally Anisotropic Elastic Half-Space

Square indentation on a soft elastomer layer with finite thickness