Abstract:The regenerative cooling technology has become the most effective method to reduce the high-temperature of the scramjet engine. With physical and chemical heat sink, the endothermic hydrocarbon fuel has excellent performance in the regenerative cooling system of the scramjet engine which operates under extremely high temperature. The pyrolytic reactions not only absorb a large amount of heat, but also produce some kinds of coking precursors, mainly alkenes and aromatics. Because of the coking precursors and the coking reactions, a lot of coke would be generated on the wall and exert strong impact on the heat transfer, as the conductivity of the coke is much lower than that of the metal wall. Meanwhile, the surface coking changes the geometric parameters of the cooling tube, which leads to the flow field variations with the thickening coking layer. So, it is needed to find out the interaction between these variations. In this paper, a one-dimensional (1D) model has been developed to calculate the flow and heat transfer parameters distributions of the pyrolytically reacted RP-3 along the regenerative cooling tube with the pyrolytic coking. The 24-step pyrolytic reaction model and the coking kinetic model are applied to predict the pyrolysis and pyrolytic coking process of RP-3, with accurate computations of the physical properties of fluid mixture which undergo drastic variations during the transcritical process. Comparisons between the current predictions and the open published experimental data are carried out and good agreement is achieved. Calculations on the coupling relationships between the flow, heat transfer, pyrolysis and pyrolytic coking within 20 min in the circular tube have been conducted. With the heat flux increased, the coke mass is rising sharply and the temperature of the outer tube wall rises rapidly owing to the increasing thermal resistance of the coke layer. Moreover, the flow velocity becomes faster during the narrowing process of the tube caused by surface coking. In order to better understand the coking characteristics, further investigations on distributions of the surface coking under heat fluxes of 1.2–2.0MW/m2, pressures of 2.6–7.4 MPa and with inlet velocities of 0–5m/s have been performed. Results reveal that all these factors play an important role in the pyrolytic reactions and the coking rate distributions. The results in this paper have significant reference value in the design of the regenerative cooling system.

Simplified pyrolytic model of RP-3 fuel at high conversion rates and the effects of primary reaction on the regenerative cooling process

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

An Improved Form of Shrinking Core Model for Prediction of the Conversion During Reduction Process in Chemical Looping Combustion

Coupling Process Analysis on the Flow and Heat Transfer of Hydrocarbon Fuel with Pyrolysis and Pyrolytic Coking under Supercritical Pressures

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

Effect of pyrolytic reaction of supercritical aviation kerosene RP-3 on heat and mass transfer in the near-wall region

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Conjugate Heat Transfer, Endothermic Fuel Pyrolysis and Surface Coking of Aviation Kerosene in Ribbed Tube at Supercritical Pressure

Comparison of RP-3 Pyrolysis Reactions Between Surrogates and 45-Component Model by ReaxFF Molecular Dynamics Simulations

Investigation of Pyrolysis Effect on Convective Heat Transfer Characteristics of Supercritical Aviation Kerosene

Numerical study on regenerative cooling technology with endothermic hydrocarbon fuel: A comprehensive review

Simplification of Pyrolytic Reaction Mechanism and Turbulent Heat Transfer of N-Decane at Supercritical Pressures

Influence of Secondary Reactions on Heat Transfer Process During Pyrolysis of Hydrocarbon Fuel under Supercritical Conditions

A New Modeling Method to Estimate the Heat Transfer Characteristics of Supercritical Aviation Kerosene RP-3 with Pyrolysis

Flow Distribution Characteristics of Supercritical Hydrocarbon Fuel in Parallel Channels with Pyrolysis

Development and validation of a detailed kinetic model for RP-3 aviation fuel based on a surrogate formulated by emulating macroscopic properties and microscopic structure

Regression Rate Calculation for the Solid Fuel Surface of Hybrid Rocket Motor Based on Fluid-Solid Coupling Technique

Flow and Thermal Analyses of Supercritical Hydrocarbon Fuel in Curved Regenerative Cooling Channel Around Cavity in Rocket Based Combined Cycle Engine

A Simplification of Pyrolytic Reaction Model of Hydrocarbon Fuel and Its Application in Simulation of Heated Channel Flow