Abstract:A simple chemical surrogate fuel model may not be able to fully reproduce the chemical behavior in real fuel combustion. A structure–chemical reactivity relationship at the molecular level is believed to be useful in tuning the chemical composition of reported surrogate fuel models. This work proposes an approach to predict a component fraction of a RP-3 surrogate fuel model with a combined method of ReaxFF molecular dynamics (MD) simulations and machine learning. There are four major steps to get a refined surrogate fuel model on the basis of parent RP-3 fuel models with two, three, or four components. Step 1 helps to prepare chemical reactivity data as the input of machine learning. The chemical reactivity data are described by the oxidation reactions in terms of dynamic species concentration with time that were prepared with ReaxFF MD simulations for each derived fuel model generated from the RP-3 parent fuel model by randomly changing its component fraction. Step 2 fits a component fraction prediction model between a single surrogate component fraction and its chemical reactivity data among the common reaction space in oxidation of possible RP-3 surrogates and a 45-component RP-3 fuel with the machine-learning method. The best performance model of LightGBM was selected among the machine-learning models of linear regression, support vector regression, and LightGBM based on the training error evaluation. Each refined component fraction of RP-3 surrogate models was predicted one by one using the trained LightGBM model with the input of dynamic species concentration data of the 45-component RP-3 fuel model better representing real RP-3 fuel. Step 3 helps to select one refined surrogate model among the predicted surrogate models with two, three, or four components by comparing the chemical reactivity deviation of important species with additional ReaxFF MD simulations under the conditions of heat-up, isothermal oxidation, and isothermal pyrolysis. The optimal model of the refined three-component RP-3 surrogate is validated in step 4 where its predicted ignition delay time is found to be closer to the reported experimental data of the real RP-3 fuel than to its parent surrogate fuel model. This work suggests that the proposed computational approach by combining ReaxFF MD simulations and machine learning should be potentially useful in search for refined RP-3 chemical surrogate fuel models directly on the basis of chemical reactivity data in oxidation at the molecular level.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c01491?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c01491</a>.Fuel composition of the derived surrogate models; error analysis for the ignition delay time; and comparison of the ignition delay time at equivalence ratio of 1 between the experimental data of real RP-3 fuel, and that of the optimal RP-3 surrogate model and its parent RP-3 model calculated with CHEMKIN (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c01491/suppl_file/ef0c01491_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

RP-3 Aviation Kerosene Surrogate Fuel and the Chemical Reaction Kinetic Model

Development and validation of a detailed kinetic model for RP-3 aviation fuel based on a surrogate formulated by emulating macroscopic properties and microscopic structure

Comparison of RP-3 Pyrolysis Reactions Between Surrogates and 45-Component Model by ReaxFF Molecular Dynamics Simulations

An experimental and modeling study of oxidation of real RP-3 aviation kerosene

Analyses of Surrogate Models for Calculating Thermophysical Properties of Aviation Kerosene RP-3 at Supercritical Pressures

Development and Validation of Small-Size Mechanism for RP-3 Aviation Fuel with High Precision

Refining Fuel Composition of RP-3 Chemical Surrogate Models by Reactive Molecular Dynamics and Machine Learning

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

A merged kinetic mechanism study of two aviation surrogate fuels

Initial Reaction Mechanism of RP-3 High Temperature Oxidation Simulated with ReaxFF MD

Development of Physical-Chemical Surrogate Models and Skeletal Mechanisms for the Combustion Simulation of Several Jet Fuels

C4+ Surrogate Models for Thermophysical Properties of Aviation Kerosene RP-3 at Supercritical Pressures

Development of a Skeletal Mechanism for Aviation Kerosene Surrogate Fuel

The influence of methyl butyrate and n-butanol on the laminar burning characteristics of RP-3: An experimental and kinetic modeling study

Effect of Different Species on Physical Properties for the Surrogate of Aviation Fuel

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Methodology for Formulating Aviation Kerosene Surrogate Fuels and The Surrogate Fuel Model for HEF Kerosene

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Single-Pulse Shock Tube Pyrolysis Study of RP-3 Jet Fuel and Kinetic Modeling

Molecular dynamics simulation of thermophysical properties of binary RP-3 surrogate fuel mixtures containing trimethylbenzene, n-decane, and n-dodecane