Abstract:Developing poly(lactic acid) (PLA)-based biodegradable polymer foams with high performance is crucial for sustainable energy conservation and the ecological environment. In this work, by applying poly(lactide-co-caprolactone) (PLCL) as a compatibilizer, the block polymer of poly(l-lactic) acid (PLLA)-b-polycaprolactone (PCL) with a long-chain branched structure was prepared by reactive processing. By utilizing the difference between the glass-transition temperature (T g) and melting temperature (T m) of PLA and PCL, PLLA-b-PCL-PLCL foams with a PCL chain as the foaming phase and an oriented PLLA chain as the enhancing phase were prepared by establishing a solid-phase hot drawing@supercritical CO2 foaming method. The incorporation of PLCL links significantly improved the interfacial compatibility between PLLA and PCL phases and chain entanglements, exhibiting strain-hardening behavior and leading to an improvement in the stretchability of the block polymer. In the hot drawing process in the range of T g(PLA)–T m(PLA), both PLLA and PCL phases were elongated along the drawing direction, and with an increasing draw ratio, the orientation factor and the crystallinity of the two phases increased evidently, accompanied by the formation of a shish–kebab crystalline structure. In the subsequent foaming process in the range of T g(PCL)–T m(PCL), the molecular chains of the PLLA phase were frozen and the retention of the orientation factor reached over 90%, while under CO2, crystallinity and crystallite size increased and a more perfect crystalline structure formed for the PCL phase. With an increasing draw ratio, the saturated dissolved amount of CO2 increased and the cell density and cell size of foam reached 5.13 × 109 cells/cm3 and 4.06 μm, respectively. The fibrillar structures of the PLLA phase appeared on the cell wall, while the tensile strength and modulus of foam reached as high as 65.9 MPa and 1.01 GPa, respectively. As a result, a super-strong PLA-based microcellular foam with dense micropores and highly oriented microfibrillar structures was constructed.

Super-strong Polyphenylene Oxide/polyphenylene Sulfide Blend Foam Fabricated by Constructing Highly Oriented Crystalline Structure

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Synergistic effects of in situ fibrillated polytetrafluoroethylene and polystyrene–butadiene block on the microcellular foaming behaviors of polyphenylene oxide modified by high‐impact polystyrene

Construction of a Highly Oriented Poly(lactic acid)-Based Block Polymer Foam and Its Self-Reinforcing Mechanism

Oriented foaming of polystyrene with supercritical carbon dioxide for toughening

PS/PPO Foam with Excellent Comprehensive Properties Prepared by Integrated Foaming and Sintering Strategy with Microwave-assisted

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure

Enhancing the foaming properties of polypropylene/basalt fiber composites by altering their rheological and crystallization behavior via polyethylene–octene blending modification

Preparation and characterization of microcellular injection molded foams from high-performance blends based on PPS-modified PPBESK

Preparation and Mechanical Properties of Polyphenylene Sulfone Foams

Batch Foam Processing of Polypropylene/Polydimethylsiloxane Blends

Boosting solubility performance of supercritical CO 2 via ethanol toward fabrication of polyetherimide/carbon fiber composite foam with three‐dimensional geometry shape

Lightweight and strong polypropylene/talc/polytetrafluoroethylene foams with enhanced flame-retardant performance fabricated by microcellular foam injection foaming

Development of High Thermal Insulation and Compressive Strength BPP Foams Using Mold-Opening Foam Injection Molding with In-Situ Fibrillated PTFE Fibers

Low-Density and High-Performance Fiber-Reinforced PP/POE Composite Foam via Irradiation Crosslinking

Preparation of Open-Cell Polymer Foams by CO2 Assisted Foaming of Polymer Blends

Strategy for the Preparation of PBAT/Starch Blended Foam with High Resilience and Shrinkage Resistance

Super toughened blends of poly(lactic acid) and poly(butylene adipate- co -terephthalate) injection-molded foams via enhancing interfacial compatibility and cellular structure

Fabrication of lightweight polyethersulfone foams with enhanced surface quality and high specific flexural properties using micro‐opening microcellular injection molding

Study on Extrusion Foaming of Polypropylene/Polydimethylsiloxane Blends

Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization