Abstract:Over the past few decades, electrochromism has been a prominent topic in energy-saving applications, which is based on the mechanism of altering the optical transmittance of EC materials under the effect of a small applied voltage. Thus, tungsten oxide (WO3) is a significant chemical compound typically applied in electrochromic devices (ECDs) as it is responsible for the optical transmittance variation. In this work, the WO3 films were produced through a sol–gel spin-coating method. The effect of various transparent conducting oxides (TCOs, which are indium-doped tin oxide (ITO), fluorine-doped tin oxide (FTO) glass substrates, and aluminum-doped zinc oxide (AZO)) was investigated in the construction of ECDs. Based on a conducting polymer polypyrene carbonate electrolyte, ITO and aluminum-doped zinc oxide (AZO)-coated glasses were also examined as counter electrodes. The electrode combination employing FTO and ITO as the TCO and counter electrode, respectively, exhibited the most significant coloration efficiency of 72.53 cm2/C. It had coloring and bleaching transmittance of 14% and 56%, respectively, with a large optical modulation of 42%. In addition to that, ECDs with the AZO counter electrode have the advantage of lower intercalation charges compared to ITO and FTO. Hence, this research offers a new avenue for understanding the role of common TCO and counter electrodes in the development of WO3-based ECDs with conducting polymer electrolytes.

Preparation and Investigation of ITO/metal/ITO Electrodes for Electrochromic Application

Thickness Effect of In2O3:Sn Electrodes on the Performance of Flexible All-Thin Film Electrochromic Devices

Optical, Electrical, and Electrochemical Properties of Indium Tin Oxide Thin Films Studied in Different Layer-Structures and Their Corresponding Inorganic All-Thin-Film Solid-State Electrochromic Devices

Preparation and performance of electrochromic TiO2 films on plastic substrate

Printing of WO3/ITO Nanocomposite Electrochromic Smart Windows

Preparation, investigation and application of nickel oxide thin films in flexible all-thin-film electrochromic devices: from material to device

A study of Electrochromic thin films and Devices by Photothermal Deflection Technique

Evaluation of Transparent ITO/Nano-Ag/ITO Electrode Grown on Flexible Electrochromic Devices by Roll-to-Roll Sputtering Technology

A Free-Standing Electrochromic Material Of Poly(5,7-Bis(2-(3,4-Ethylenedioxy)Thienyl)-Indole) And Its Application In Electrochromic Device

Electrochromic coloration of single-layer ITO:Nb oxides thin film

Preparation of Electrochromic Polythiophene and Fabrication of Corresponding Solid-State Electrochromic Device

The preparation and investigation of all thin film electrochromic devices based on reactively sputtered MoO<sub>3</sub> thin films

An All-Thin-film Inorganic Electrochromic Device Monolithically Fabricated on Flexible PET/ITO Substrate by Magnetron Sputtering

Investigation of the Driving Voltage on the High Performance Flexible ATF-ECDs Based on PET/ITO/NiOX/LiTaO3/WO3/ITO

Optimized Properties of Innovative ElectroChromic Device Using ITO / Ag / ITO Electrodes

Preparing and Investigating the Monolithically Stacked Flexible Tandem All-Thin-film Electrochromic Device

Electrochemical Behavior Investigation of ITO Coated Optical Fiber

The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes

Preparation and Properties of All-Solid-State Inorganic Thin Film Glass/Ito/Wo3/Linbo3/Niox/Ito Electrochromic Device

Dip-Coating Process Engineering and Performance Optimization for Three-State Electrochromic Devices

Electrode Modifications for Polymer Light-Emitting Electrochemical Cells