Abstract:Reducing the membrane surface negative charge density and properly enlarging the pore size could benefit the selective and efficient separation of divalent cations from monovalent cations desired by many applications (e.g., Li+/Mg2+ separation) using nanofiltration (NF) by synergistically exploiting the Donnan and steric effects. This study provides a one-step tactic for the preparation of such membranes by simply introducing a small percentage of sulfuryl chloride (SO2Cl2) into the organic phase of trimesoyl chloride (TMC). This method is adaptable to the classical interfacial polymerization (IP) technique. The key conditions include a sufficient high concentration of piperazine (PIP) in the aqueous phase (e.g., 2.0 wt %) and a low-to-medium concentration ratio of sulfuryl chloride to TMC. An as-prepared membrane, which manifested a high Li+/Mg2+ selectivity of 22.2, exhibited a high rejection of MgCl2 at 92%, a low rejection of Na2SO4 at 34%, and a relatively high water permeance of 11.1 L m(-2) h(-1) bar(-1). We propose that the sulfuryl chloride monomers mainly played an interferential role rather than largely being incorporated into the polyamide matrix. This was demonstrated by the very low sulfur element composition in the active layer and the substantially enlarged membrane pore size in comparison to that of the control membrane. Adding sulfuryl chloride into the organic phase could allow more PIP monomers to diffuse through the enlarged structure to the superficial surface of the membrane, leaving more unreacted amine groups endowed with positive charges. Moreover, the addition of sulfuryl chloride could greatly change the membrane surface and structural morphologies, and in turn the surface roughness, by increasing the number of large ring-like structures and/or rougher nodules that could cover almost the entire membrane surface. Therefore, this work demonstrated that the membranes fabricated by the novel approach could have practical applications for cation separation.

Positively Charged Modification of Commercial Nanofiltration Membrane to Enhance the Separation of Mono−/divalent Cation

A Novel Positively Charged Nanofiltration Membrane Formed Via Simultaneous Cross-Linking/quaternization of Poly(m-Phenylene Isophthalamide)/polyethyleneimine Blend Membrane

Positively Charged Nanofiltration Membrane Based on Cross-Linked Polyvinyl Chloride Copolymer

Membranes with Negatively-Charged Nanochannels Fabricated from Aqueous Sulfonated Polysulfone Nanoparticles for Enhancing the Rejection of Divalent Anions

Tailoring Pore Size of Positively-Charged Nanofiltration Membrane Via a Facile Self-Assembly Method

Charge‐Sign‐Independent Separation of Mono‐ and Divalent Ions With Nanofiltration Membranes

Fabrication of Highly Positively Charged Nanofiltration Membranes by Novel Interfacial Polymerization: Accelerating Mg2+ Removal and Li+ Enrichment

Enhancing Mg 2+ /Li + separation performance of nanofiltration membranes through polyelectrolyte modulation and surface modification

Simultaneously Modulating Nanofiltration Membrane Surface Charges and Pore Size in Pursuit of Effective Cation Separation Via a Bi-Functional Monomers-Interfered IP Reaction

A Selective Separation Mechanism for Mono/divalent Cations and Properties of a Hollow-Fiber Composite Nanofiltration Membrane Having a Positively Charged Surface

Fabrication of positively charged nanofiltration membrane with uniform charge distribution by reversed interfacial polymerization for Mg2+/Li+ separation

Positively charged nanofiltration membranes for efficient Mg<SUP>2+</SUP>/Li<SUP>+</SUP> separation from high Mg<SUP>2+</SUP>/Li<SUP>+</SUP> ratio brine

Grafting modification of thin-film composite membrane with quaternary ammonium polyelectrolyte for Mg 2+ /Li + separation

Positively Charged Zwitterion-Carbon Nitride Functionalized Nanofiltration Membranes with Excellent Separation Performance of Mg2+/Li+ and Good Antifouling Properties

Capping-grafting Synergistic Strategy for the Preparation of High-Performance Mg2+/Li+ Separation Nanofiltration Membranes

Structure and Positive Charge Regulation in Nanofiltration Membrane by Novel Nanomaterial G-C3n5 for Efficient Li+/Mg2+ Separation

Positively Charged Nanofiltration Membranes with Gradient Structures for Enhancing Separation Properties

Positively Charged Polyamine Nanofiltration Membrane for Precise Ion-Ion Separation.

Advanced Mg2+/Li+ Separation Nanofiltration Membranes by Introducing Hydroxypropyltrimethyl Ammonium Chloride Chitosan As a Co-Monomer

Enhancing Ion Separation Efficiency: Janus Charged Nanofiltration Membrane Fabricated via Polyethyleneimine-Manipulated Interfacial Polymerization

Nanofiltration membrane with surface nanostructure induced by interfacial modification for heavy metal ions removal, salt selection and antibacterial