Abstract:There is a significant requirement for acid-resistant nanofiltration (NF) membranes with a positive charge in order to effectively treat and recycle acidic industrial wastewater that contains heavy metal ions. Currently, acid-resistant nanofiltration membranes still exhibit low water permeance and typically display only weak positively charged or even negatively charged surface, which presents a vast challenge for the effective removal of heavy metal ions. In this work, we successfully produced a positively charged hollow fiber (HF) NF membrane with outstanding water permeability by combining interfacial polymerization (IP) and surface modification approaches. The IP reaction was conducted on the inner surface of an HF polysulfone (PSf) substrate using polyethyleneimine (PEI) as the aqueous monomer and cyanuric chloride (CC) as the organic monomer. This process results in the formation of a positively charged polyamine selective layer. Subsequently, the surface of the selective layer was modified with an aqueous solution of (3-bromopropyl) trimethylammonium bromide (BPTAB) via a Hoffman alkylation process, which increases the positive charge density and hydrophilicity of the HF NF membrane. Consequently, the BPTAB-modified HF NF membrane achieves a water permeance of 44.5 L m−2 h−1 MPa−1, which is a 130 % increase compared to the unmodified baseline HF NF membrane. Meanwhile, it exhibits excellent desalination performance, corresponding to a rejection of 97.3 %, 99.3 % and 99.1 %, for MgCl2, CoCl2 and MnCl2, respectively. Additionally, it demonstrates excellent resistance to acids, which remains a 93.3 % MgCl2 rejection after being submerged in pH = 1 HNO3 solution for 60 days.

Nanofiltration membrane with surface nanostructure induced by interfacial modification for heavy metal ions removal, salt selection and antibacterial

Chlorine-resistant positively charged nanofiltration membranes formed by SI-ATRP method for heavy metal ions removal

Highly Permeable Positively Charged Nanofiltration Membranes with Multilayer Structures for Multiple Heavy Metal Removals

Constructing Positively Charged Hollow Fiber Nanofiltration Membranes with High Performance for the Treatment of Wastewater Containing Heavy Metal Ions

Incorporating Etched ZnO Nanoparticles to Fabricate Positively Charged Composite Membrane for Heavy Metal Removal

Dually Charged Mof-Based Thin-Film Nanocomposite Nanofiltration Membrane For Enhanced Removal Of Charged Pharmaceutically Active Compounds

Fabrication of Hollow Fiber Nanofiltration Separation Layer with Highly Positively Charged Surface for Heavy Metal Ion Removal

Removal of Heavy Metal Ions from Acidic Wastewater by Constructing Positively Charged Hollow Fiber Nanofiltration Separating-Layer Based on Fe (iii)/co Deposition-Quaternization

Triethanolamine Modification Produces Ultra-Permeable Nanofiltration Membrane with Enhanced Removal Efficiency of Heavy Metal Ions

Construction of Hollow Fiber Nanofiltration Separation Layer with Bridging Network Structure by Polymer-Anchored Co-Deposition for High-Concentration Heavy Metal Ion Removal

Preparation of Positively Charged Acid-Resistant Hollow Fiber Nanofiltration Membrane with Excellent Separation Performance by Surface Modification

Improvement of the Separation and Antibiological Fouling Performance Using Layer-by-layer Self-Assembled Nanofiltration Membranes

Enhancing Polysulfone Nanocomposite Membrane Heavy-Metal-removal Performance Using an Amine-Functionalized Separation Layer with 3D Nanonetworks

Positively Charged Nanofiltration Membrane with Dendritic Surface for Toxic Element Removal

Metal In Situ Surface Functionalization Of Polymer-Grafted-Carbon Nanotube Composite Membranes For Fast Efficient Nanofiltration

Positively Charged Modification of Commercial Nanofiltration Membrane to Enhance the Separation of Mono−/divalent Cation

Fabrication of an Electrically Conductive Separation Layer with Stable Nanonetworks for Efficient Removal of Heavy Metals under an External Voltage

Chelating polymer modified P84 nanofiltration (NF) hollow fiber membranes for high efficient heavy metal removal

Nanofiltration Mixed Matrix Membranes from Cellulose Modified with Zn-Based Metal-Organic Frameworks for the Enhanced Water Treatment from Heavy Metal Ions

Ionic liquid-functionalized antibiofouling nanofiltration membranes

Tailoring the microstructure of zwitterionic nanofiltration membranes via post-treatment for antibiotic desalination