Abstract:This study addresses the axial compressive performance of welded hollow spherical (WHS) joints with external triangular ribs. External triangular ribs are able to postpone the local buckling of the joint during axial loading, and thus strengthen the compressive capacity of it. A simplified analytical model is proposed to elucidate the stress distribution on the hollow sphere of axial-loaded WHS joints with external triangular ribs. Then a simplified solution for the yield strength of axial-loaded WHS joints is deduced based on the elastic thin shell theory. The simplified solution indicates that the yield strength of WHS joints with external triangular ribs can be expressed by a coefficient related to the specifications of the ribs and the joints multiply by that of WHS joints without external ribs. Compression tests on 6 full-scale specimens of WHS joints with varied configurations of triangular ribs are conducted. It shows that the failure mode and the strength enhancement of the specimens vary as the specification of the triangular ribs change, and the triangular ribs enhance the strength of the joints up to 77 %. A refined FE model is established and calibrated against the findings from the experiments. Parametric studies on the design parameters which may affect the compressive response of the WHS joints with triangular ribs are fully investigated. It is shown that the compressive yield strength of the joint rises with the increase of the number, height and thickness of the triangular ribs, and decreases with the increase of the angle-of-elevation of the triangular ribs. It is also shown that the effect of the ratio of the diameter of the sphere to that of the steel tube on the compressive yield strength of the joint is much lighter than the others, and deemed as negligible. Regression analysis on the experimental and numerical data is carried out to obtain a practical formula for the compressive capacity of WHS joints with external triangular ribs. This formula is incorporated with the previously developed formula for the compressive capacity of WHS joints with external trapezoidal ribs, to form a general formula applicable for WHS joints with either external triangular ribs or external trapezoidal ribs.

Stress Concentration Factor Distribution Formulas for Three-Planar Tubular Y-joints under Axial Force

Prediction of Stress Concentration Factor Distribution for Multi-Planar Tubular DT-joints under Axial Loads

Simplified theoretical solution and practical calculation method for welded hollow spherical joints of rectangular hollow section members

Compressive Performance of Welded Hollow Spherical Joints with External Triangular Ribs

Scf Distribution Of Concrete-Filled Chs T- And Y- Joints Under Axial Tension

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Stress influence matrix on hot spot stress analysis for welded tubular joint in offshore jacket structure

A method for stress concentration factor determination of welded steel bridge T-joints under moving load

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

Experimental Evaluation of Stress Concentration Factor of Welded Steel Bridge T-Joints

Parametric assessment of stress concentration factors for end-to-end joints with rotated SHSs

Research on applicability of stress concentration factor parameter equations of welded steel tubular joints

Stress Concentration Factors for Non-Load-Carrying Welded Cruciform Joints Subjected to Tension, Bending, and Shear

Effect of welding residual stress on the performance of CFST tubular joints

Experimental and numerical investigations on stress concentration factors of concrete filled steel tube X-joints

Experiment investigations of stress concentration factor of concrete-filled tubular T joints

Study on stress concentration factor of concrete-filled steel tubular T-joints

Expressions for Stress Concentration Factors for T-Joints of Hollow and Concrete-Filled Square Cross-Sections for In-Plane Axial and Bending Loads

Hot Spot Stress Approach For Fatigue Life Assessment In Welded Bridge Connections Using Monitoring Data And Fem Analysis