Abstract:The current technique of hydrogen generation and cooling production raises climatic problems, which calls for the investigation of cleaner alternatives. No research has been conducted to propose and analyze a solar thermal power cycle-based water electrolysis for on-site production of hydrogen and the detailed exergy analysis of a series flow double-effect absorption chilling machine employed for large solar cooling. In this regard, a helically coiled tube embedded central receiver is used in the heliostat field for the simultaneous production of solar cooling and green hydrogen to meet the increasing needs of energy and fuel sustainably. The combined system is composed of four sub-systems including a heliostat field, LiBr–H 2 O operated series-flow double effect absorption refrigeration cycle (DEARC), organic Rankine cycle (ORC), and proton exchange membrane (PEM) electrolyzer. The system was examined from energy and exergy perspectives in the Engineering Equation Solver (EES) using library data of REFPROP for obtaining the thermodynamic properties of working fluids. The results of the thermodynamic model for the combined system are validated. Furthermore, the effect of ambient temperature, solar irradiation, and type of ORC working fluid on the hydrogen and cooling production, and the overall energy and exergy efficiency of the combined system are examined. A computational fluid dynamics simulation applying ANSYS-FLUENT was used to examine how coil curvature ratio and coil torsion affect solar heat transfer fluid (SHTF) pressure and temperature leaving the receiver. The coil curvature ratio affects temperature increase more than coil torsion. Solar heat transfer fluid outlet temperature increases by 36.9 % when the coil curvature ratio increases from 0.063 to 0.095 at direct normal irradiations (DNI) 1200 W/m 2 , input temperature of 92°C, and coil torsion of 0.032. The response of the cogeneration cycle to varying operating parameters is examined. Application of R141b as the ORC fluid results in a large increase of cooling exergy efficiency from 14.98 % to 63.48 % when the ambient temperature is increased from 15 °C to 45 °C whereas the exergy efficiency of the combined system is marginally improved. The exergy distribution presents for ORC operating on R141b, out of 100 % input solar exergy, 16.42 % is generated as hydrogen exergy and 13.67 % cooling exergy, 66.79 % is the exergy destroyed, and the rest 3.12 % is exergy loss. Exergy analysis is utilized to identify the sources of losses in useful energy within the components of the system considered and provides a more realistic and meaningful assessment than the traditional energy analysis. The results justify a need for the promotion of exergy analysis through policy decisions in the context of the global energy and environment crisis.

Design, modeling and multi-objective techno-economic optimization of an integrated supercritical Brayton cycle with solar power tower for efficient hydrogen production

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Sustainable Power Generation Through Solar-Driven Integration of Brayton and Transcritical CO2 Cycles: A Comprehensive 3E (Energy, Exergy, and Exergoenvironmental) Evaluation

Performance Assessment and Working Fluid Selection of the Novel Combined Helium Brayton Cycle and Organic Rankine Cycle Based on Solar Power Tower for Sustainable Generation

Modeling and Multi-Objective Optimization of a Solar-Boosted Gas Turbine Cycle for Green Hydrogen Production and Potable Water Production

Multi-objective optimization of hydrogen production system based on the combined supercritical cycle and gas turbine plant

Thermo-Economic Optimization Of Supercritical Co2 Brayton Cycle On The Design Point For Application In Solar Power Tower System

Multi‐objective optimization of a novel supercritical CO2 cycle‐based combined cycle for solar power tower plants integrated with SOFC and LNG cold energy and regasification

Integration of Vanadium-Chlorine Thermochemical Cycle with a Nano-Particle Aided Solar Power Tower for Power and Hydrogen Cogeneration

A novel zero carbon emission system based on the complementary utilization of solar energy and hydrogen

Transient multi-objective optimization of solar and fuel cell power generation systems with hydrogen storage for peak-shaving applications

A novel solar hydrogen production system integrating high temperature electrolysis with ammonia based thermochemical energy storage

A green hydrogen energy storage concept based on parabolic trough collector and proton exchange membrane electrolyzer/fuel cell: Thermodynamic and exergoeconomic analyses with multi-objective optimization

Proposal and ANN-assisted optimization of a hybrid solar- and biomass-based energy system for electricity, freshwater, and hydrogen production

Thermodynamic analysis and optimization of the combined supercritical carbon dioxide Brayton cycle and organic Rankine cycle‐based nuclear hydrogen production system

Techno-economic-environmental Study and Artificial Intelligence-Assisted Optimization of a Multigeneration Power Plant Based on a Gas Turbine Cycle along with a Hydrogen Liquefaction Unit

Thermal Design and Analysis of a Fully Solar-Driven Copper-Chlorine Cycle for Hydrogen Production

Integrating solar-powered branched GAX cycle and claude cycle for producing liquid hydrogen: Comprehensive study using real data and optimization

Evaluation of a concentrated solar power-driven system designed for combined production of cooling and hydrogen

Multi-objective optimization and 4E analyses of the solar energy assisted direct-heated sCO2 power cycle for low-temperature applications

Using Nanoparticles for Performance Enhancement of a Solar Energy-Driven Power/hydrogen Cogeneration Plant Based on Thermochemical Cycles: Multi-aspect Analysis and Environmental Assessment