Abstract:To address high‐frequency loss in planar transformers for LLC resonant converters, the winding width was optimized to reduce eddy current and skin effect losses, improving efficiency. A mathematical model analyzed losses in the windings and core, whereas design rules for three winding geometries helped determine the optimal width. Finite element simulation with Maxwell3D and a 500‐W prototype validated the findings. Variable‐width windings promote uniform current density, reduce losses, enhance heat dissipation, and lower temperature rise. To address the issue of significant loss increase in planar transformers at high frequencies in LLC resonant converters, the winding width of the transformer was optimized. This design minimizes losses due to eddy currents and skin effects, thereby optimizing the transmission efficiency of the LLC resonant converter. This paper developed a mathematical model of the transformer windings, analyzed the losses in the windings and the core of the planar transformer, and summarized the design rules for three commonly used winding geometries. By determining the optimal winding width, the transformer losses were optimized. Using the finite element simulation software Maxwell3D, a 3D simulation model of the transformer was constructed. The simulation results were compared, and a 500‐W full‐bridge LLC prototype was built to validate the principles summarized in the paper.

Common-Mode Noise Mitigation Method for Planar Transformer Based on FB LLC Converter

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

Design of Transformer Shielding Foil Structure for Minimizing Common-Mode Noise in LLC Resonant Converters

Complementary Couple-Turns: An Effective Method for Reducing Common-Mode Noise in Full-Bridge LLC Resonant Converter With Split Primary Winding Transformer

Suppressing Methods of Common-Mode Noise in LLC Resonant DC-DC Converters

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

Analysis and Suppression of Common-Mode EMI Noise in 1 MHz 380 V-12 V DCX Converter with Low NFoM Devices

Suppressing Method of Common-Mode Noise in MHz 380V-12V DCX Converter

Utilizing Flexible Printed Circuit Board (FPCB) to Realize Passives Integration in LLC Resonant Converter

A Control Method for the Problem of Losing the ZVS in CCM Mode LLC Converter Caused by Rectifier Parasitic Capacitance

Full-Bridge LLC Resonant Converter with Parallel-Series Transformer Connection and Voltage Doubler Rectifier

Impedance-Balancing-based Modulation Strategy for Common-Mode Noise Elimination of CHB Converter

Optimized Design of Integrated Planar Matrix Transformer for LLC Converter in Consumer Electronics

Modelling and Optimisation of Planar Matrix Transformer for High Frequency Regulated LLC Converter

Low Common Mode Noise Half Bridge LLC DC-DC Converter with Asymmetric Center Tapped Rectifier

A 3-D Winding Structure for Planar Transformers and Its Applications to LLC Resonant Converters

Transformer Structure of Bifilar Primary Winding with Advanced Common Mode Noise Attenuation Performance for Isolated DC-DC Converters

Winding loss optimization for planar transformer in LLC resonant converter

Analysis and Reduction of Common Mode Current of the Transformer in a Full-Bridge LLC Battery Charger

Winding Loss Reduction Based on the Even Magnetomotive Force in the Wide-Range RDCX Converter for OBC

Optimized Design of Full‐Bridge LLC Planar Transformer Based on Variable‐Width Windings