Abstract:To increase the power rating and improve the reliability of the single-phase power supply system, the input-parallel output-parallel (IPOP) single-phase dc/ac converters (SDACs) are widely used. However, among the IPOP SDACs, there are complicated circulating currents which will increase the current stress on the switching devices and influence the safe operation of the system. But, the detailed quantitative analysis of the circulating currents is not well developed and the corresponding suppression strategies are not very comprehensive. Focusing on these problems, this paper pays attention to the detailed mathematic model and effective suppression strategy of circulating currents among IPOP SDACs. First, the detailed mathematic model of the circulating currents is established. Based on this model, it is found that there are various types of circulating currents existing in the IPOP SDACs, including circulating currents within the single SDAC and circulating currents among the multiple SDACs. At the same time, the influence factors are also analyzed, and it is first revealed that the asymmetry of impedances in different sides will cause circulating currents with different frequencies components including the dc, fundamental, and second frequencies. Second, after the detailed analysis, a decentralized control method composed of the common mode (CM) and differential mode (DM) control is proposed to suppress the complicated circulating currents. The control method is comprehensive and can suppress circulating currents caused by diverse influence factors. All the theoretical analyses are verified by the real-time hardware-in-loop (HIL) tests.

Suppressing Method of Common-Mode Noise in MHz 380V-12V DCX Converter

Analysis and Suppression of Common-Mode EMI Noise in 1 MHz 380 V-12 V DCX Converter with Low NFoM Devices

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

Suppressing Methods of Common-Mode Noise in LLC Resonant DC-DC Converters

Analysis and Reduction of Common-mode Noise in Cellular RDCX Converter

Low Common Mode Noise Cellular RDCX with Single Bus Multi-Level Regulator

High Efficiency High Density 1 MHz 380–12 V DCX with Low FoM Devices

Modular High Efficiency High Density MHz DCX with Different Output Voltage Adaptation

Impedance-Balancing-based Modulation Strategy for Common-Mode Noise Elimination of CHB Converter

A 98.4% Efficiency 380V-12V DCX with 1.3kw/in3 Power Density Using Low NFoM Devices and Resonant Drive Transformer

Analysis of MHz 380V-12V DCX with Low FoM Device

High Efficiency High Power Density Cellular 1mhz 380V-12V DCX for Future Data Centers

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

1 MHz 48–12 V Regulated DCX with Single Transformer

Decentralized Suppression Strategy of Circulating Currents among IPOP Single-Phase DC/AC Converters

High-Efficiency High-Density RDCX Modules Cascaded with CHB PFC Stage

Low Common Mode Noise Half Bridge LLC DC-DC Converter with Asymmetric Center Tapped Rectifier

Light-Load Efficiency Improvement of MHz RDCX Based on Output Voltage Ripple and Resonant Pulse Number Control

A 1.8kw/in3 Power Density Cellular 380V-12V DCX with 98.4% Peak Efficiency Using Low NFoM Devices and Resonant Drive Transformer

High Frequency Common Mode EMI Noise Suppression for Switching Converters by Impedance Control

A Novel CCSC for Circulating Current Suppression in Modular Multilevel Converters