Enhanced resistance to carbon deposition in chemical-looping combustion of methane: Synergistic effect of different oxygen carriers via sequence filling
Xianming Cheng,Zhenhua Gu,Fashe Li,Xing Zhu,Yonggang Wei,Min Zheng,Dong Tian,Hua Wang,Kongzhai Li
DOI: https://doi.org/10.1016/j.cej.2021.129776
IF: 15.1
2021-10-01
Chemical Engineering Journal
Abstract:<p>Chemical-looping combustion (CLC) is a promising technology which can realize CO<sub>2</sub> capture with low energy consumption. Carbon deposition is one of the main challenges in CLC of methane, which decreases the efficiency of combustion and CO<sub>2</sub> capture. In this work, the carbon formation behaviors of four typical oxygen carriers (OCs) including NiO/ZrO<sub>2</sub>, Fe<sub>2</sub>O<sub>3</sub>/Al<sub>2</sub>O<sub>3</sub>, MnO<sub>2</sub>/ZrO<sub>2</sub> and CuO/SiO<sub>2</sub> were investigated, and a strategy for carbon elimination was proposed by arranging the four OCs with suitable sequences in fixed-bed reactor. It is found that carbon is easy to form on the NiO/ZrO<sub>2</sub> OC, although it shows high CH<sub>4</sub> conversion. The reduction of Fe<sub>2</sub>O<sub>3</sub>/Al<sub>2</sub>O<sub>3</sub> is a stepwise process and carbon will be generated in the deep reduction from Fe<sub>3</sub>O<sub>4</sub> to FeO/Fe. MnO<sub>2</sub>/ZrO<sub>2</sub> OC exhibits poor activity for CH<sub>4</sub> conversion, but it shows high resistance to carbon deposition. For CuO/SiO<sub>2</sub> OC, it shows high CH<sub>4</sub> conversion (89.1%) and CO<sub>2</sub> selectivity (97.6%) with almost no formation of carbon. When combing the four OCs in the CuNiFeMn sequence, high-performance CuO/SiO<sub>2</sub> and NiO/ZrO<sub>2</sub> OCs in front of the filling fixed-bed can oxidize most of CH<sub>4</sub>. CuO/SiO<sub>2</sub> OC will oxidize CH<sub>4</sub> to CO<sub>2</sub> and H<sub>2</sub>O, then the formed CO<sub>2</sub>/H<sub>2</sub>O may gasify the carbon deposition on the NiO/ZrO<sub>2</sub> OC to produce CO and H<sub>2</sub>. Thereafter, these reducible gases as well as the residual CH<sub>4</sub> can be oxidized by the following Fe<sub>2</sub>O<sub>3</sub>/Al<sub>2</sub>O<sub>3</sub> and MnO<sub>2</sub>/ZrO<sub>2</sub> OCs with relatively poor activity. In this way, the synergistic effect among the sequenced OC mixtures can significantly enhance the CLC efficiency and resistance to carbon deposition.</p>
engineering, chemical, environmental