Abstract:Chemical-looping combustion (CLC) is a promising technology which can realize CO2 capture with low energy consumption. Carbon deposition is one of the main challenges in CLC of methane, which decreases the efficiency of combustion and CO2 capture. In this work, the carbon formation behaviors of four typical oxygen carriers (OCs) including NiO/ZrO2, Fe2O3/Al2O3, MnO2/ZrO2 and CuO/SiO2 were investigated, and a strategy for carbon elimination was proposed by arranging the four OCs with suitable sequences in fixed-bed reactor. It is found that carbon is easy to form on the NiO/ZrO2 OC, although it shows high CH4 conversion. The reduction of Fe2O3/Al2O3 is a stepwise process and carbon will be generated in the deep reduction from Fe3O4 to FeO/Fe. MnO2/ZrO2 OC exhibits poor activity for CH4 conversion, but it shows high resistance to carbon deposition. For CuO/SiO2 OC, it shows high CH4 conversion (89.1%) and CO2 selectivity (97.6%) with almost no formation of carbon. When combing the four OCs in the CuNiFeMn sequence, high-performance CuO/SiO2 and NiO/ZrO2 OCs in front of the filling fixed-bed can oxidize most of CH4. CuO/SiO2 OC will oxidize CH4 to CO2 and H2O, then the formed CO2/H2O may gasify the carbon deposition on the NiO/ZrO2 OC to produce CO and H2. Thereafter, these reducible gases as well as the residual CH4 can be oxidized by the following Fe2O3/Al2O3 and MnO2/ZrO2 OCs with relatively poor activity. In this way, the synergistic effect among the sequenced OC mixtures can significantly enhance the CLC efficiency and resistance to carbon deposition.

A novel concept for ultra-low concentration methane treatment based on chemical looping catalytic oxidation

Utilization of ventilation air methane as an oxidizing agent in chemical looping combustion

Chemical looping combustion of ultra low concentration of methane with Fe2O3/Al2O3 and CuO/SiO2

Properties and mechanisms of low concentration methane catalytic combustion in porous media supported with transition metal oxides

Low-Temperature Chemical Looping Combustion for Removing Unburnt Gaseous Components with A Cement-Supported Cuo Oxygen Carrier

Experimental demonstration of 80 kWth chemical looping combustion of biogenic feedstock coupled with direct CO2 utilization by exhaust gas methanation

Enhanced performance of chemical looping combustion of methane by combining oxygen carriers via optimizing the stacking sequences

Enhanced resistance to carbon deposition in chemical-looping combustion of methane: Synergistic effect of different oxygen carriers via sequence filling

Enhanced methane conversion in chemical looping partial oxidation systems using a copper doping modification

The use of iron oxide as an oxygen carrier in chemical-looping combustion of methane with inherent separation of CO2

Comprehensive optimization of coal chemical looping gasification process for low CO 2 emission based on multi-scale simulation coupled experiment

Transformation and Migrant Mechanism of Sulfur and Nitrogen during Chemical Looping Combustion with CuFe2O4

Low-temperature Oxidative Coupling of Methane: A Review

Chemical looping co-conversion of CH4 and CO2 using Fe2O3/Al2O3 pellets as both oxygen carrier and catalyst in a fluidized bed reactor

Experimental Study on Ultra-Low Concentration Methane Regenerative Thermal Oxidation

Three-dimensional Simulation of a Gas-Fueled Chemical Looping Combustion System with Dual Circulating Fluidized Bed Reactors

Experimental Study of Cu-modified Manganese Ore for O2 Production in the CLC + CLOU Scheme

Pressurized chemical-looping combustion of coal using an iron ore as oxygen carrier in a pilot-scale unit

Research and Development of Coal-fueled Chemical Looping Combustion

NiO/κ-CeZrO4 functional oxygen carriers with Niδ+ and oxygen vacancy synergy for chemical looping partial oxidation reforming of methane

Experiments on chemical looping combustion of coal with a NiO based oxygen carrier