Abstract:Formaldehyde-water-trioxane (HCHO–H2O–TOX) tends to form a stable azeotrope and the HCHO solution can also produce multiple by-products, making it challenging to refine and obtain high-purity TOX, resulting in increased energy consumption. Formic acid (FA) is the most easily generated and undesirable main byproduct of HCHO, which has strong corrosiveness to production equipment. However, the negative impact of HCHO mentioned above is often overlooked because of its low concentration. In this study, the CuO/ZnO–AlN catalyst was synthesized using a simple deposition precipitation method. The catalyst demonstrated a high removal rate of HCHO and inhibition of FA, along with excellent hydrothermal stability. Aluminum nitride (AlN) can form a layer of Al(OH)3 coating, acting as a physical barrier against H2O during the reaction process and releasing trace OH− to facilitate the formation of Cannizaro intermediates. It can then catalyze HCHO dehydrogenation under alkaline-free conditions to form H2 and an intermediate (HCOO−), which is further converted to H2 and CO2 under the influence of Cu0. The relevant characterization results showed that Cu0 is the active site. The strong interaction between AlN and copper refines the particle size of CuO and promotes the reduction of CuO to Cu0. In addition, an H2 atmosphere can more effectively inhibit the oxidation of Cu0 compared to an N2 atmosphere, resulting in a higher HCHO removal rate. This rate can reach 100% at 105 ℃ and 4 MPa H2 and almost no FA can be detected in the product. Cycling tests proved that the prepared catalyst could be recycled and reused three times without a noticeable reduction in catalytic activity, demonstrating its good application potential.Graphical Abstract

Catalytic Oxidation Removal of Hcn in Tail Gas

Simultaneous Removal of Co, Nox, and Hc Emitted from Gasoline Engine in A Nonthermal Plasma-Driven Catalysis System

Simultaneous Catalytic Removal of Nox and Diesel Soot over Cu-Containing Hydrotalcite Derived Catalysts

Characteristics of HCN removal using cao at high temperatures

Coupling Catalytic Hydrolysis and Oxidation of HCN over HZSM-5 Modified by Metal (fe,cu) Oxides

Combination of Nonthermal Plasma and Low Temperature-C3h8-Selective Catalytic Reduction over Co-In/H-Beta Catalyst for Nitric Oxide Abatement

Simultaneous Removal of Naphthalene and NOx over V-Ce/Ti Catalyst: Design of Separated Active Sites for Naphthalene Degradation and SCR Reaction

Removal of Hydrogen Cyanide by Using Activated Carbon: the Effect of Adsorption Condition and Chemical Modification

Preparation and Adsorption Property of Modified Activated Carbon for Purification of HCN in Closed Carbide Furnace Tail Gas

Using CuO-MnOx/AC-H as catalyst for simultaneous removal of Hg° and NO from coal-fired flue gas.

Coupled Catalytic Oxidation–Reduction and Hydrolysis with Ce1Mn2 Catalysts for HCN and NO Removal

Nonthermal-Plasma-Assisted Selective Catalytic Reaction Of No By Ch4 Over Cuo/Tio2/Gamma-Al2o3 Catalyst

Simultaneous Catalytic Removal of NOx and Soot Particulates over CuMgAl Hydrotalcites Derived Mixed Metal Oxides

Improving Catalytic Performance and Stability of Copper-Zinc Based Catalyst on Aluminum Nitride for Formaldehyde Removal from Crude Trioxane

A Modified Selective Catalytic Reduction Catalyst and Its Catalytic Oxidation for Hg0

Insights into the differences in metal anchoring mechanisms and the impact on HCN catalytic oxidation performance

In Situ Regeneration and Deactivation of Co-Zn/H-Beta Catalysts in Catalytic Reduction of NOx with Propane

Reaction Behaviors of CH3CN Catalytic Combustion over CuCeO -HZSM-5 Composite Catalysts: the Mechanism of Enhanced N2 Selectivity

Mechanistic Insight into Reaction Behaviors of Acetonitrile Catalytic Combustion over Cu-based Catalysts with Different Supports

Nonthermal-Plasma-Assisted Selective Catalytic Reaction of NO by CH<sub>4</sub>over CuO/TiO<sub>2</sub>/γ-Al<sub>2</sub>O<sub>3</sub>Catalyst

Catalytic Oxidation of Hydrocarbons over Co3o4 Catalyst Prepared by Cvd