Abstract:In order to develop an iron-based catalyst with high attrition resistance and stability for Fischer–Tropsch synthesis (FTS), a series of experiments were carried out to investigate the effects of SiO2 and its hydroxyl content and a boron promoter on the attrition resistance and catalytic behavior of spray-dried precipitated Fe/Cu/K/SiO2 catalysts. The catalysts were characterized by means of N2 physisorption, nuclear magnetic resonance (NMR), X-ray diffraction (XRD), Raman spectrum, X-ray photoelectron spectroscopy (XPS), H2-thermogravimetric analysis (H2-TGA), temperature-programmed reduction and hydrogenation (TPR and TPH), and scanning and transmission electron microscopy (SEM and TEM). The FTS performance of the catalysts was tested in a slurry-phase continuously stirred tank reactor (CSTR), while the attrition resistance study included a physical test with the standard method and a chemical attrition test under simulated reaction conditions. The results indicated that the increase in SiO2 content enhances catalysts’ attrition resistance and FTS stability, but decreases activity due to the suppression of further reduction of the catalysts. Moreover, the attrition resistance of the catalysts with the same silica content was greatly improved with an increase in hydroxyl number within silica sources, as well as the FTS activity and stability to some degree. Furthermore, the boron element was found to show remarkable promotion of FTS stability, and the promotion mechanism was discussed with regard to probable interactions between Fe and B, K and B, and SiO2 and B, etc. An optimized catalyst based on the results of this study was finalized, scaled up, and successfully applied in a megaton industrial slurry bubble FTS unit, exhibiting excellent FTS performance.

Aluminum‑yttrium Oxides Supported Iron for Effective Catalytic Reforming of Toluene: Promotion Roles of Yttrium

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

A Novel Hybrid Iron-Calcium Catalyst/absorbent for Enhanced Hydrogen Production Via Catalytic Tar Reforming with In-Situ CO2 Capture

Selective solvent-free oxidation of toluene to benzaldehyde over zeolite supported iron

Steam reforming of aromatics mixture as a model tar over Ni/Al 2 O 3 structured catalyst

Preparation, Characterization and Catalytic Properties of Yttrium-Zirconium-Pillared Montmorillonite and Their Application in Supported Ce Catalysts

Hydrogen production from catalytic steam reforming of toluene over trace of Fe and Mn doping Ni/Attapulgite

Ferric sludge derived pyrolyzed-hydrochar supported iron catalysts for catalytic cracking of toluene

Effects of Al, Si, Ti, Zr Promoters on Catalytic Performance of Iron-Based Fischer–Tropsch Synthesis Catalysts

Γ-Fe2o3 As the Precursor of Iron Based Catalyst Prepared by Solid-State Reaction at Room Temperature for Fischer-Tropsch to Olefins

Effect of alkaline-earth metals (Mg, Ca, Sr, and Ba) on precipitated iron-based catalysts for high-temperature Fischer-Tropsch synthesis of light olefins

Effect of Zr promoter on precipitated iron-based catalysts for high-temperature Fischer-Tropsch synthesis of light olefins

Optimal Fe/Ni/ Ca‐Al catalyst for tar model steam reforming by using the Taguchi method

Stabilizing the Active Phase of Iron-Based Fischer–Tropsch Catalysts for Lower Olefins: Mechanism and Strategy

Development of an Iron-Based Fischer—Tropsch Catalyst with High Attrition Resistance and Stability for Industrial Application

Enhanced Catalytic Ozonation of Toluene Using Supported MnOx/USY Via Regulating the Distribution of Aluminum Species in USY by Dealumination

MOF-derived FeO x with highly dispersed active sites as an efficient catalyst for enchaning catalytic oxidation of VOCs

Tuning reactivity of Fischer–Tropsch synthesis by regulating TiOx overlayer over Ru/TiO2 nanocatalysts

Rare Earth (Gd, Pr and La) Promoted Three-Dimensional Ordered Macro/Mesoporous Ni/CeZr Catalysts for Low-Temperature Catalytic Steam Reforming of Toluene as Tar Model

Enhanced H 2 -Rich Gas Production via Steam Reforming of Toluene over Ni-Based Hydrotalcite-Derived Catalysts at Low Temperature

Post-Synthesis of HZSM-5 by Aluminum Fluoride in an Acidic Fluoride Solution for Enhanced Reforming of Lignite Pyrolytic Volatiles into Light Aromatics