Post-Synthesis of HZSM-5 by Aluminum Fluoride in an Acidic Fluoride Solution for Enhanced Reforming of Lignite Pyrolytic Volatiles into Light Aromatics

Tianlong Liu,Fei Ning,Qi Li,Zhonghong Li,Xiaobo Feng,Xiaoyan Zhao

DOI: https://doi.org/10.1021/acs.energyfuels.3c01494

IF: 4.6541

2023-07-13

Energy & Fuels

Abstract:Dealumination by chemical etching with acids has been one of the most common post-treatment methods for secondary porosity engineering of zeolite but inevitably suffers from adverse impacts on its skeleton structure and acidic properties. Herein, we present a novel method to treat HZSM-5 zeolite in a buffer solution of HF/NH4F and employ AlF3 as an external Al source for one-step dealumination and alumination. The as-prepared hierarchical zeolites remain with high crystallinity and acidity, while secondary mesopores are formed. A suitable loading of AlF3 (1.0 wt %) together with a diluted buffer solution (0.1 M) is the most optimal condition, under which the mesoporous volume of HZSM-5 increases from 23 to 41% from the total volume. Under the synergetic effects of H+ and F–, AlF3 undergoes complexation, hydrolysis, and dehydration reactions and is introduced into the frameworks. The catalytic performances for reforming lignite pyrolytic volatiles into light aromatics at 600 °C showed that the AlF3-modified zeolites exhibited higher activity than the parent toward suppressing the coke deposition and yielding the desired products.

energy & fuels,engineering, chemical