Conversion of Harmful Fly Ash Residue to Zeolites: Innovative Processes Focusing on Maximum Activation, Extraction, and Utilization of Aluminosilicate

Huidong Liu
DOI: https://doi.org/10.1021/acsomega.2c02388
IF: 4.1
2022-05-27
ACS Omega
Abstract:Reuse of the solid residue from coal fly ash alumina extraction (FAAE) by acid leaching is problematic. Conversion of this solid residue into aluminum-rich zeolite (13X) and silicon-rich zeolite (ZSM-5) was investigated in this research. The FAAE residue was activated by alkali roasting with Na<sub>2</sub>CO<sub>3</sub> powder (110% mass fraction) at 890 °C for 60 min. Silicon and aluminum were mainly present as two mineral phases, Na<sub>2</sub>SiO<sub>3</sub> and NaAlSiO<sub>4</sub>, respectively, in the product obtained after roasting. The roasted product was dissolved in water (liquid/solid ratio of 2) after 20 min at 100 °C. The water-leaching liquor was investigated for total conversion to aluminosilicate zeolites without external aluminum or silicon addition. Hydrothermal synthesis of aluminum-rich zeolite 13X was successful after fine tuning of the conditions, although the filtrate had an unusually high SiO<sub>2</sub>/Al<sub>2</sub>O<sub>3</sub> molar ratio. Production of 13X consumed a large amount of aluminum, which increased the Si/Al ratio to a level suitable for synthesis of ZSM-5. The synthesis of ZSM-5 from the mother liquor of 13X was proved feasible. The FAAE residue was transformed into high-value zeolite products by nearly 100%. Additionally, the tail liquid of this process, mainly containing Na<sub>2</sub>CO<sub>3</sub>, was completely recycled. This process could be used to realize high-efficiency and high-value utilization of similar aluminosilicate solid wastes.
chemistry, multidisciplinary
What problem does this paper attempt to address?