Abstract:A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting–recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting–recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

Highly Efficient and Controllable Micromixer Through Interactions of Photothermal Multi-Vortices

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

A Three-Dimensional Vortex Microsystem Designed and Fabricated for Controllable Mixing

Staggered Oriented Ridges Micromixer Based on Chaotic Advection

An Enhanced Electroosmotic Micromixer with an Efficient Asymmetric Lateral Structure.

Vortex-Enhanced Microfluidic Chip for Efficient Mixing and Particle Capturing Combining Acoustics with Inertia.

A Directly Moldable, Highly Compact, and Easy-for-Integration 3D Micromixer with Extraordinary Mixing Performance

Enhanced Mixing Efficiency for a Novel 3D Tesla Micromixer for Newtonian and Non-Newtonian Fluids

A Microfluidic Mixer of High Throughput Fabricated in Glass Using Femtosecond Laser Micromachining Combined with Glass Bonding.

Mixing in a co-flow-focusing structured droplet-based micromixer

A compact and efficient three-dimensional microfluidic mixer

A Three-Dimensional Micromixer Using Oblique Embedded Ridges

Design and Experimental Study of Staggered Oriented Ridges Micromixers

Insights into a T-type micromixer with novel electromagnetic mixing

Numerical study of a novel electroosmotic active micromixer with twin diamond-shaped chambers and sawteeth

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Millisecond Mixing of Two Liquid Streams in a Mixer Model

Vortices-interaction-induced Microstreaming for the Pump-Free Separation of Particles.

Vortex-Mode Optofluidic Manipulation Based On Hybrid Photothermal Waveguide

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

An ultra-rapid acoustic micromixer for synthesis of organic nanoparticles