Abstract:The sintering temperature of piezoelectric ceramics plays a pivotal role in their cost and efficacy within the realm of multilayer actuator applications. While being conducive to piezoelectric capabilities of ceramics, the increase in sintering temperature entails higher fabrication costs. In contrast, a lower sintering temperature can reduce costs, but the performance of the actuator may be compromised. To address these issues, the Li-Sc co-doped 0.46PNN-0.23PIN-0.31PT ceramics were produced in the present work. At a relatively low sintering temperature (950 °C), the synergy of multiple ferroelectric phases and defect polarization could be achieved, thereby augmenting the electromechanical properties of the material. At an optimal doping ratio of 0.6 mol% for both Li and Sc, the ceramics demonstrated superior performance metrics, including d33 = 1000 pC/N, d33* = 1050 pm/V, kp = 0.53, and εr = 8001. Applying the Rietveld refinement and Rayleigh analysis, it was established that the incorporation of Li is essential in the formation of a rhombohedral phase-dominated morphotropic phase boundary (MPB), which decreases polarization anisotropy amidst the coexisting phases, facilitating polarization rotation and significantly enhancing the piezoelectric properties of ceramics. The nanodomains within the material were detected through SS-PFM and PFM testing. Notably, Sc3+-induced defects disrupted the extended ferroelectric domains, fostering the emergence of nanodomains with higher activity, which in turn enabled to markedly improve the electromechanical performance of the ceramics even at the lower sintering temperature. This investigation not only provides a viable strategy for curtailing the manufacturing costs of multilayer actuators but also opens up new prospects for the low-temperature fabrication of piezoelectric materials and their applications.

Low-temperature sintered PMnS–PZT multilayer-ceramic for nano-step piezomotor application

Process and Analysis of Multilayer Piezoelectric Ceramic for Micro-motor

Low‐temperature sintering Sm‐doped PMN–PZ–PT multilayer ceramic actuator with high strain and temperature stability

Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties

Low temperature sintering of Li2CO3 added Pb(Ni1/3Nb2/3)-Pb(Zr,Ti)O3 ceramics with high piezoelectric properties

Middle-low Temperature Sintering and Piezoelectric Properties of CuO and Bi2O3 Doped PMS-PZT Based Ceramics for Ultrasonic Motors

Composition Design of PMN-PH-PT Piezoelectric Ceramics for High-Temperature Actuator Applications

Enhanced and reliable high-power performance of PMN–PZT-based piezoelectric ceramics

The electrical properties of low-temperature sintered 0.07Pb(Sb1/2Nb1/2)O3-0.93Pb(Zr Ti1−)O3 multilayer piezoceramic actuator

A low-cost multilayer piezoelectric actuator for ultrasonic motor stator driving fabricated by a low-temperature co-fired ceramic process

Investigation of phase structure and electrical properties of PMN-PSN-PNN–PZT ceramics with different PNN content

Low-temperature Sintered Bi0.5Na0.5TiO3-SrTiO3 Incipient Piezoceramics and the Co-Fired Multilayer Piezoactuator Thereof

Structure and Electrical Properties of PMN-PZT Micro-Actuator Deposited by Tape-Casting Process

MnCO3 Modified PMN-PZT Piezoelectric Ceramics with Enhancing Mechanical Quality Factor and Low Loss

Piezoelectric Property Amplification in 0.46PNN-0.23PIN-0.31PT Ceramics Via Optimized Low-Temperature Sintering and Defect Chemistry

Optimizing structure and electrical properties of high-Curie temperature PMN-PHT piezoelectric ceramics via tailoring sintering process

Significantly improved piezoelectric performance of PZT-PMnN ceramics prepared by spark plasma sintering

Piezoelectric Response and Cycling Fatigue Resistance of Low-Temperature Sintered PZT-Based Ceramics

Fabrication of Low Firing Piezoelectric Ceramics and Their Applications

Low‐temperature sintering and enhanced piezoelectric properties of random and textured PIN–PMN–PT ceramics with Li2CO3

Sm-Doped PMN-PZT Ceramic Fibers with High Piezoelectric and Dielectric Properties