Implantable Optical Fiber Sensor for Monitoring the Stress Evolution in Lithium-Sulfur Battery

Yanpeng Li,Ziyun Miao,Xiangpeng Xiao,Zhen Li,Zhijun Yan,Qizhen Sun

DOI: https://doi.org/10.1364/cleo_at.2022.atu5m.4

2022-01-01

Abstract:We report the implantable optical fiber sensor for monitoring the cathode stress evolution in the lithium-sulfur battery. The operando decoding of the chemo-mechanics events of Li-sulfur battery is successfully realized.

What problem does this paper attempt to address?

Direct optical fiber monitor on stress evolution of the sulfur-based cathodes for lithium–sulfur batteries

Ziyun Miao,Yanpeng Li,Xiangpeng Xiao,Qizhen Sun,Bin He,Xue Chen,Yaqi Liao,Yi Zhang,Lixia Yuan,Zhijun Yan,Zhen Li,Yunhui Huang

DOI: https://doi.org/10.1039/d2ee00007e

2022-01-01

Abstract:Fiber Bragg grating sensors are embedded within sulfur-based cathodes to systematically investigate the stress evolution in three types of Li–S cells.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Monitoring the Strain Evolution of Lithium‐Ion Battery Electrodes using an Optical Fiber Bragg Grating Sensor

Ashish Manandhar,P. Kiesel,Chang-Jun Bae,A. Raghavan

DOI: https://doi.org/10.1002/ENTE.201500514

2016-07-01

Abstract:More advanced characterization and developmental tools are essential to improve the performance and safety of Li-ion batteries. Conventional tools have been limited to customized test cell configurations that require special facilities and expensive equipment. As a practical solution for the in situ monitoring of realistic battery cells, we have embedded fiber optic sensors within Li-ion battery pouch cells to monitor the internal electrode strain and temperature during cycling. Here we report the direct monitoring of strain evolution using implanted fiber-optic sensors within the individual electrodes in a Li-ion battery. Reproducible peak shifting and splitting in the implanted fiber optic sensor originate from the accumulated longitudinal and transverse strains associated with the expansion or contraction of the anode electrode. These discoveries demonstrate the feasibility and utility of fiber Bragg grating (FBG) sensors to be used as diagnostic tools in the development of new battery materials and structures.

Physics,Engineering,Materials Science
In Operando Monitoring the Stress Evolution of Silicon Anode Electrodes during Battery Operation via Optical Fiber Sensors

Yi Zhang,Xiangpeng Xiao,Weilun Chen,Zihan Zhang,Wanming Li,Xiaoyu Ge,Yanpeng Li,Jingwei Xiang,Qizhen Sun,Zhijun Yan,Yifei Yu,Hui Yang,Zhen Li,Yunhui Huang

DOI: https://doi.org/10.1002/smll.202311299

IF: 13.3

2024-02-18

Small

Abstract:The integration of optical sensors within pouch cells containing different Silicon (Si) anodes has facilitated a comprehensive analysis of the stress evolution exhibited by them. The results demonstrate that the differences in stress evolution are nested in the morphological of Si particles and thecharacteristics of electrode structures. These findings offer fresh insights into the electrochemical mechanics of Si‐based electrodes. Silicon (Si) anode has attracted broad attention because of its high theoretical specific capacity and low working potential. However, the severe volumetric changes of Si particles during the lithiation process cause expansion and contraction of the electrodes, which induces a repeatedly repair of solid electrolyte interphase, resulting in an excessive consuming of electrolyte and rapid capacity decay. Clearly known the deformation and stress changing at με resolution in the Si‐based electrode during battery operation provides invaluable information for the battery research and development. Here, an in operando approach is developed to monitor the stress evolution of Si anode electrodes via optical fiber Bragg grating (FBG) sensors. By implanting FBG sensor at specific locations in the pouch cells with different Si anodes, the stress evolution of Si electrodes has been systematically investigated, and Δσ/areal capacity is proposed for stress assessment. The results indicate that the differences in stress evolution are nested in the morphological changes of Si particles and the evolution characteristics of electrode structures. The proposed technique provides a brand‐new view for understanding the electrochemical mechanics of Si electrodes during battery operation.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Real-time monitoring of internal structural deformation and thermal events in lithium-ion cell via embedded distributed optical fibre

Yifei Yu,Elena Vergori,Faduma Maddar,Yue Guo,David Greenwood,James Marco

DOI: https://doi.org/10.1016/j.jpowsour.2021.230957

IF: 9.2

2022-02-01

Journal of Power Sources

Abstract:The in-operando monitoring of the cell's kinetic thermal and electrochemical processes during operation is a key requirement to understand battery performance, improve safety and to extend battery life. This research presents in-situ measurements of strain and temperature evolution within a graphite electrode during electromechanical lithiation and delithiation. By embedding distributed fibre optics sensor, the frequency shift associated with both temperature and strain are decoupled, allowing the real-time measurement of the solid electrolyte interface formation and the structural deformation within the anode. An in-depth assessment of electrode strain as a function of State of Charge (SoC) and State of Health (SoH) from the formation cycle through to electrical loading allows the assessment of cell performance over its complete life. It is observed that irreversible and non-uniformly distributed anode structural deformation was measured during the formation. The anode reveals an extensive mechanical strain increase with a coefficient of 0.96 με/SoC(%) with respect to the SoC and undergoes a compressive mechanical strain as SoH decreases from 100% to 47%. Collectively, the findings presented provide valuable new information to understand the causes of battery performance degradation as a result of electrode strain and temperature, underpinning new opportunities for battery characterisation and optimal system design.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Towards Long-Term Monitoring of Commercial Lithium-Ion Batteries Enabled by Externally Affixed Fiber Sensors and Strain-Based Prognostic Strategies

Sasan Ghashghaie,Julien Bonefacino,Yin-Nee Cheung,Xin Cheng,Mingde Wang,Hwa-Yaw Tam,Jean-Marie Tarascon,Steven T. Boles,hwa-yaw tam,Steven T Boles

DOI: https://doi.org/10.1149/1945-7111/ad3780

IF: 3.9

2024-03-26

Journal of The Electrochemical Society

Abstract:Real-time monitoring of both continuous and spontaneous degradation in lithium-ion batteries is challenging due to the limited number of quantitative metrics available during cycling. In this regard, improved sensing approaches enabled by sensors of high accuracy, precision, and durability are key to achieving comprehensive state estimation and meeting rigorous safety standards. In this work, external temperature and strain monitoring in commercial Li-ion button cells was carried out using tandem pairs of polymer-based and silica-based optical fiber Bragg grating sensors. The decoupled data revealed that the sensors can reliably track strain and temperature evolution for over 500 cycles, as evidenced by periodic patterns with no sign of sensor degradation or loss of fidelity. Moreover, monitoring the strain signal enabled early detection of an anomalous cell over ~60 cycles ahead of an electrochemical signature and abrupt drop in capacity, suggesting that mechanical sensing data may offer unique benefits in some cases. Detailed mechanical monitoring via incremental strain analysis suggests a parallel path toward understanding cell degradation mechanisms, regardless of whether they are continuous or discrete in nature. The accuracy and durability of such a package-level optical fiber sensing platform offer a promising pathway for developing robust real-time battery health monitoring techniques and prognostic strategies

electrochemistry,materials science, coatings & films
Operando Decoding of Surface Strain in Anode‐Free Lithium Metal Batteries via Optical Fiber Sensor

Yanpeng Li,Yi Zhang,Zhen Li,Zhijun Yan,Xiangpeng Xiao,Xueting Liu,Jie Chen,Yue Shen,Qizhen Sun,Yunhui Huang

DOI: https://doi.org/10.1002/advs.202203247

IF: 15.1

2022-07-26

Advanced Science

Abstract:Monitoring and analyzing the capacity decay of anode‐free lithium metal batteries are of great importance for their future applications. The strain evolution contains abundant information about capacity decay, which is collected and decoded via optical fiber sensor. The small size and excellent multiplexing capacity of optical fiber sensor make it a powerful tool for capacity fade analysis in practice. With zero excess lithium, anode‐free lithium metal batteries (AFLMBs) can deliver much higher energy density than that of traditional lithium metal batteries. However, AFLMBs are prone to suffer from rapid capacity loss and short life. Monitoring and analyzing the capacity decay of AFLMBs are of great importance for their future applications. It is known that the capacity fade mainly comes from the formation of solid electrolyte interphase species and dead lithium, which leads to irreversible volume expansion. Therefore, monitoring and distinguishing the irreversible volume expansion or reversible volume expansion are the key points to analyze the capacity fade of AFLMBs. Herein, an applicable technique based on optical fiber sensors to characterize and quantize the volume change of AFLMBs is developed. By attaching fiber Bragg grating (FBG) sensors onto the surface of the multilayered anode‐free pouch cells, the strain evolution of the cells is successfully monitored and correlated with their electrochemical properties. It is found that the decline of surface strain fluctuation amplitude caused by the loss of active lithium is the leading indicator of battery failure. The proposed sensing technique has excellent multiplexing capability that can be considered as an elementary unit for capacity fade analysis in next‐generation battery management system.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

Netanel Shpigel,Mikhael D. Levi,Xiaopeng Cheng,Tianci Cao,Rui Wu,Tyler S. Mathis,Yuefei Zhang,Doron Aurbach,Yury Gogotsi

DOI: https://doi.org/10.1021/acsenergylett.9b00884

IF: 22

2019-01-01

ACS Energy Letters

Abstract:Quick charging of Li-ion batteries is often accompanied by rapid expansion of composite battery electrodes, resulting in the appearance of transient stresses inside the electrodes' bulk. Although predicted theoretically, they have never been tracked by direct in situ measurements. Herein, using multiharmonic electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D), acoustic images of strong transient deformations in LiFePO4 electrodes were obtained in the form of giant resonance frequency and resonance width shifts. The formation of cracks was verified by scanning electron microscopy. The effects of charging rate, stiffness of the polymeric binder, and solution concentration have been identified. The attractive feature of EQCM-D is its high sensitivity for selective probing of average mechanical characteristics of the operated electrodes, especially of the particle-binder interactions, directly linked to the electrode cycling performance. Using EQCM-D, an inexpensive, simple, and fast method of structural health monitoring for battery electrodes can be intelligently designed.
A highly sensitive stretchable constraint fiber mat sensor with tailored near-zero Poisson's ratio for very early stage of battery over charge/overdischarge monitoring

Guoqing Liu,Yingying Zhang,Bo Li,Shijie Guo,Wenjing Yuan,Chuizhou Meng

DOI: https://doi.org/10.2139/ssrn.4752041

IF: 15.1

2024-04-28

Chemical Engineering Journal

Abstract:Battery state monitoring is crucial for safe operation and efficient management of lithium-ion battery (LIB) systems, but early stage of timely and accurate diagnosis remains challenging. Herein, we propose to utilize a highly sensitive stretchable strain sensor to in-situ monitor the slight strain variation of cells during charge and discharge, through which the state of the battery can be accurately reflected. The high sensing capability is realized by tailoring the Poisson's ratio of low-modulus conductive fiber mats through a facile constraint manner. The non-uniform strain distribution together with the near-zero Poisson's ratio synergistically result in the superior sensing performance, including ultralow strain detection limit (0.006%), high strain sensitivity particularly under small strains (gauge factor of 116.1 between 0 and 2% strain), and high strain resolution under large deformations. When being practically utilized for LIB monitoring, the constraint fiber mat sensor can produce instant resistance response reflecting the cell capacity, and offer timely warning signal once the cell is overcharged or overdischarged. The developed stretchable strain sensor possesses comprehensive advantages of low mechanical constraint, tailorable small size, easy integration and conformality to cells, and little temperature interference, which would serve as a promising candidate for future battery state analysis and safety monitoring.

engineering, chemical, environmental
In-situ measurements of electrochemical stress/strain fields and stress analysis during an electrochemical process

Haimei Xie,Bin Han,Haibin Song,Xiaofei Li,Yilan Kang,Qian Zhang

DOI: https://doi.org/10.1016/j.jmps.2021.104602

IF: 5.582

2021-11-01

Journal of the Mechanics and Physics of Solids

Abstract:The importance of electrochemical stress has been widely recognized because it determines the lifetime of lithium-ion (Li+) batteries. Herein, we propose an in-situ method to visually measure the electrochemical stress fields associated with strain and Li+ concentration along the diffusion path. Three important links are established successively; namely, an electrochemical stress model, visual observation, and in-situ collaborative measurements of core mechano-electrochemical parameters. The strain field and Li+ concentration distribution in a graphite electrode are measured in situ using a dual optical system. The electrochemical stress field considering Li+ concentration, strain and Li+-dependent stiffening is obtained. The spatiotemporal evolution of the experimental parameters is evaluated. The experimental results demonstrate that the electrode experiences compressive stress and tensile strain. The strain and electrochemical stress exhibit gradient distributions along the Li+ diffusion path and increase with the electrochemical process. Furthermore, the mechano-electrochemical interrelation of tensile strain, compressive stress and Li+ concentration is considered. It is demonstrated that compressive stress (tensile strain) evolves linearly (nonlinearly) with Li+ concentration. Mechanical constraint-induced stress (i.e., strain) and Li+ concentration-induced stress show opposing positive and negative states, making them competitive contributions to electrochemical stress. This study increases understanding of the mechano-electrochemical interrelation in electrodes, which will help to improve electrode performance.

mechanics,materials science, multidisciplinary,physics, condensed matter
Operando monitoring of dendrite formation in lithium metal batteries via ultrasensitive tilted fiber Bragg grating sensors

Xile Han,Hai Zhong,Kaiwei Li,Xiaobin Xue,Wen Wu,Nan Hu,Xihong Lu,Jiaqiang Huang,Gaozhi Xiao,Yaohua Mai,Tuan Guo

DOI: https://doi.org/10.1038/s41377-023-01346-5

2024-01-23

Light Science & Applications

Abstract:Lithium (Li) dendrite growth significantly deteriorates the performance and shortens the operation life of lithium metal batteries. Capturing the intricate dynamics of surface localized and rapid mass transport at the electrolyte–electrode interface of lithium metal is essential for the understanding of the dendrite growth process, and the evaluation of the solutions mitigating the dendrite growth issue. Here we demonstrate an approach based on an ultrasensitive tilted fiber Bragg grating (TFBG) sensor which is inserted close to the electrode surface in a working lithium metal battery, without disturbing its operation. Thanks to the superfine optical resonances of the TFBG, in situ and rapid monitoring of mass transport kinetics and lithium dendrite growth at the nanoscale interface of lithium anodes have been achieved. Reliable correlations between the performance of different natural/artificial solid electrolyte interphases (SEIs) and the time-resolved optical responses have been observed and quantified, enabling us to link the nanoscale ion and SEI behavior with the macroscopic battery performance. This new operando tool will provide additional capabilities for parametrization of the batteries' electrochemistry and help identify the optimal interphases of lithium metal batteries to enhance battery performance and its safety.

optics
An overview on in situ / operando battery sensing methodology through thermal and stress measurements

Yi Shen,Sheng Wang,Haomiao Li,Kangli Wang,Kai Jiang

DOI: https://doi.org/10.1016/j.est.2023.107164

IF: 9.4

2023-03-25

Journal of Energy Storage

Abstract:The regular operation of lithium-ion batteries (LIBs) undergoes diverse electrochemical reactions. How to monitor the state of batteries timely and precisely, such as tracing the charge-discharge process and battery lifespan and conducting fault diagnosis, has aroused countless interests. Complying with the fast, massive, and economic requirements of industries, in situ / operando measurements are promising candidates for real-time monitoring and great support for precise battery state estimation. Numerous micro-/macro- scale techniques have been brought about to reveal the battery behavior in real-time, among which battery sensors have stood out by virtue of their portability, economic friendliness, and precision. Herein, the heat and stress behavior during battery electrochemical reactions are analyzed at first, followed by the elaborate introduction of recent advances in battery sensors, which contains the method, experimental outcomes, and the interpretation of obtained data. Moreover, the Fiber Bragg Grating sensor (FBG) is especially emphasized and carefully reviewed, which has high potential in industrial detection and practical application.

energy & fuels
Operando monitoring of strain field distribution in lithium battery anode via ultra-high spatial resolution optical frequency domain reflectometer

Kaijun Liu,Zhijuan Zou,Guolu Yin,Yingze Song,Zeheng Zhang,Yuyang Lou,Zixuan Zhong,Huafeng Lu,Duidui Li,Tao Zhu

2024-07-03

Abstract:The cycling performance of lithium-ion batteries is closely related to the expansion effect of anode materials during charge and discharge processes. Studying the mechanical field evolution of anode materials is crucial for evaluating battery per-formance. Here, we propose a phase-sensitive ultra-high spatial resolution optical frequency domain reflectometry tech-nique, in which the test fiber is embedded into the anode of a lithium-ion battery to monitor the mechanical evolution of the anode material during cycling. We investigated the strain evolution of the anode material under different loading levels and used this method to infer the morphological changes of the material. Furthermore, combining this with battery capacity in-formation provides a new approach for assessing the performance of lithium-ion batteries.

Instrumentation and Detectors,Optics
Functional Optical Fiber Sensors Detecting Imperceptible Physical/Chemical Changes for Smart Batteries

Yiding Li,Li Wang,Youzhi Song,Wenwei Wang,Cheng Lin,Xiangming He

DOI: https://doi.org/10.1007/s40820-024-01374-9

2024-03-18

Abstract:The battery technology progress has been a contradictory process in which performance improvement and hidden risks coexist. Now the battery is still a "black box", thus requiring a deep understanding of its internal state. The battery should "sense its internal physical/chemical conditions", which puts strict requirements on embedded sensing parts. This paper summarizes the application of advanced optical fiber sensors in lithium-ion batteries and energy storage technologies that may be mass deployed, focuses on the insights of advanced optical fiber sensors into the processes of one-dimensional nano-micro-level battery material structural phase transition, electrolyte degradation, electrode-electrolyte interface dynamics to three-dimensional macro-safety evolution. The paper contributes to understanding how to use optical fiber sensors to achieve "real" and "embedded" monitoring. Through the inherent advantages of the advanced optical fiber sensor, it helps clarify the battery internal state and reaction mechanism, aiding in the establishment of more detailed models. These advancements can promote the development of smart batteries, with significant importance lying in essentially promoting the improvement of system consistency. Furthermore, with the help of smart batteries in the future, the importance of consistency can be weakened or even eliminated. The application of advanced optical fiber sensors helps comprehensively improve the battery quality, reliability, and life.
Operando monitoring of ion activities in aqueous batteries with plasmonic fiber-optic sensors

Runlin Wang,Haozhe Zhang,Qiyu Liu,Fu Liu,Xile Han,Xiaoqing Liu,Kaiwei Li,Gaozhi Xiao,Jacques Albert,Xihong Lu,Tuan Guo

DOI: https://doi.org/10.1038/s41467-022-28267-y

IF: 16.6

2022-01-27

Nature Communications

Abstract:Abstract Understanding ion transport kinetics and electrolyte-electrode interactions at electrode surfaces of batteries in operation is essential to determine their performance and state of health. However, it remains a challenging task to capture in real time the details of surface-localized and rapid ion transport at the microscale. To address this, a promising approach based on an optical fiber plasmonic sensor capable of being inserted near the electrode surface of a working battery to monitor its electrochemical kinetics without disturbing its operation is demonstrated using aqueous Zn-ion batteries as an example. The miniature and chemically inert sensor detects perturbations of surface plasmon waves propagating on its surface to rapidly screen localized electrochemical events on a sub-μm-scale thickness adjacent to the electrode interface. A stable and reproducible correlation between the real-time ion insertions over charge-discharge cycles and the optical plasmon response has been observed and quantified. This new operando measurement tool will provide crucial additional capabilities to battery monitoring methods and help guide the design of better batteries with improved electro-chemistries.

multidisciplinary sciences
State of Charge Estimation for Commercial Li-Ion Battery Based on Simultaneously Strain and Temperature Monitoring Over Optical Fiber Sensors

Xile Han,Tuan Guo,Wen Wu,Xiaobin Xue,Zhencheng Li,Xudong Xia,G. Xiao

DOI: https://doi.org/10.1109/TIM.2024.3390696

IF: 5.6

IEEE Transactions on Instrumentation and Measurement

Abstract:The combination of artificial intelligence methods and multisensory is crucial for future intelligent battery management systems (BMSs). Among multisensing technologies in batteries, simultaneously monitoring the strain and temperature is essential to determine the batteries’ safety and state of charge (SoC). However, the combination still faces a few challenges, such as obtaining multisensing parameters with only one simple and easy-to-fabricate sensor, and how to use artificial intelligence and measurement parameters such as strain and temperature for effective modeling. To address these, we propose a novel sensing technique based on a compact dual-diameter fiber Bragg gratings (FBGs) sensor capable of being attached to the surface of a working lithium-ion pouch cell to simultaneously monitor the battery’s surface strain and temperature. Then, based on the collected data of strain and temperature, we have constructed deep neural network (DNN) models with different inputs to realize accurate battery SoC estimation with high resistance to electromagnetic interference. Based on our DNN models, the experimental results show that strain and temperature information can be used as supplementary parameters for improved SoC estimation (accuracy increased from 97.40% to 99.94%). Meanwhile, we also find that by just using the strain and temperature information obtained by the optical fiber sensor, the SoC estimation can be achieved without the voltage and current inputs. This new optical fiber measurement tool will provide crucial additional capabilities to battery sensing methods, especially for the future intelligent BMS.

Computer Science,Materials Science,Engineering
In-situ STEM Observation of Strain Field Movement in a LiMn2O4 Nanowire Battery

So-Yeon Lee,Yoshifumi Oshima,Eiji Hosono,Haoshen Zhou,Ryoji Kanno,Kunio Takayanagi

DOI: https://doi.org/10.1017/s1431927615005565

IF: 4.0991

2015-01-01

Microscopy and Microanalysis

Abstract:To understand lithium ion transport behavior is an issue for improving the performance of lithium ion batteries.Lithium insertion or extraction reaction in most lithium ion battery (LIB) electrode materials causes lattice parameter change.It leads local strain field change.Thus, measuring strain field during charge-discharge cycles allows us to know how lithium ions move inside a LIB material.
In Situ Measurements of Stress Evolution in Silicon Thin Films During Electrochemical Lithiation and Delithiation

Vijay A. Sethuraman,Michael J. Chon,Maxwell Shimshak,Venkat Srinivasan,Pradeep R. Guduru

DOI: https://doi.org/10.48550/arXiv.1108.0647

2011-08-02

Materials Science

Abstract:We report in situ measurements of stress evolution in a silicon thin-film electrode during electrochemical lithiation and delithiation by using the Multi-beam Optical Sensor (MOS) technique. Upon lithiation, due to substrate constraint, the silicon electrode initially undergoes elastic deformation, resulting in rapid rise of compressive stress. The electrode begins to deform plastically at a compressive stress of ca. -1.75 GPa; subsequent lithiation results in continued plastic strain, dissipating mechanical energy. Upon delithiation, the electrode first undergoes elastic straining in the opposite direction, leading to a tensile stress of ca. 1 GPa; subsequently, it deforms plastically during the rest of delithiation. The plastic flow stress evolves continuously with lithium concentration. Thus, mechanical energy is dissipated in plastic deformation during both lithiation and delithiation, and it can be calculated from the stress measurements; we show that it is comparable to the polarization loss. Upon current interrupt, both the film stress and the electrode potential relax with similar time-constants, suggesting that stress contributes significantly to the chemical potential of lithiated-silicon.
Experimental measurement of electro-chemo-mechanical properties of a composite silicon electrode in lithium ion batteries

Dawei Li,Hongfei Wan,Huibing Liu,Yikai Wang,Junqian Zhang

DOI: https://doi.org/10.1039/d2cp01545e

2022-10-27

Abstract:The applications of silicon (Si)-based electrodes in lithium ion batteries have been impeded by mechanical degradation caused by lithiation/delithiation-induced volume changes. Understanding the evolution of mechanical behavior and properties of Si composite electrodes during electrochemical cycling is indispensable to develop coping strategies and predict battery life. In this study, we optimized an in situ method for measuring electro-chemo-mechanical properties, including partial molar volume, elastic modulus, and electrochemical reaction-induced stress, based on the curvature changes of cantilever electrodes. We found that the swell strain and partial molar volume of Si electrodes increase with the Li concentration. The elastic modulus generally decreases with the Li concentration. The in-plain stress transforms from tensile stress to compressive stress and showed an increasing tendency during further lithiation, while it shows a reverse trend during delithiation. The stress evolution correlates well with the "opening" and "closing" of micro-cracks in Si composite electrodes during cycling. These findings provide not only input parameters for battery modeling but also help understand the capacity fading of Si electrodes. Furthermore, the in situ measurement methodology developed in this study is readily applied to other battery electrodes.
A laser-scribed wearable strain sensing system powered by an integrated rechargeable thin-film zinc-air battery for a long-time continuous healthcare monitoring

Xue Chen,Zhanrui Hou,Guoxian Li,Wei Yu,Ye Xue,Guangyu Niu,Mingyang Xin,Li Yang,Chuizhou Meng,Shijie Guo

DOI: https://doi.org/10.1016/j.nanoen.2022.107606

IF: 17.6

2022-10-01

Nano Energy

Abstract:Wearable sensors with long cruising times without the need for an external wire-connected power supply are urgently required for a continuous physiological signal monitoring. Herein, we report the design and fabrication of a wearable all-in-one sensing system that integrates a sensitive strain sensor and a rechargeable zinc-air battery on the same laser-induced graphene (LIG) platform. The sensing electrode of the strain sensor, the catalytic air electrode of the zinc-air battery and the interconnection lines between the two are simultaneously fabricated through the same laser-scribing process on polyimide (PI) followed by pattern transfer to a flexible and stretchable polydimethylsiloxane (PDMS) substrate. In the sensor, the conductive porous LIG exhibits a high gauge factor (~2710.95), a wide detection range (~40%), and a well cyclic loading-unloading stability (>20,000 cycles). In the zinc-air battery, Co3O4 nanoparticles are in-situ laser-sintered on LIG to form an excellent electrode/electrolyte/air three-phased interfacing structure for a high catalytic performance, and a moisturized tetraethyl ammonium hydroxide (TEAOH)-KOH/polyvinyl alcohol (PVA) gel electrolyte tightly binds the Co3O4/LIG air electrode and zinc foil electrode together into an integrate thin-film energy device, which provides a high open-circuit voltage (~1.39 V) and a high specific capacity (712 mAh g−1 at 0.2 mA cm−2). For a proof-of-concept, an intelligent wristband based on the sensing system was fabricated and worn on the wearer’s wrist for a long-time continuous pulse monitoring of up to 10 h. The health state of the wearer can be depicted upon the acquired pulse waveforms. The developed LIG-based sensing system with a high internal powering capability will be promising in wearable sensing applications.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Flexible self-powered integrated sensing system based on a rechargeable zinc-ion battery by using a multifunctional polyacrylamide/carboxymethyl chitosan/LiCl ionic hydrogel

Yueqin Li,Yong Yang,Xiaohui Liu,Yiwen Yang,Yiyang Wu,Lin Han,Qiangshan Han

DOI: https://doi.org/10.1016/j.colsurfa.2022.129254

2022-05-26

Abstract:Wearable smart sensors based on conductive hydrogels have attracted intensive research interest due to their high comfort and accurate detection of physiological signals. However, most reported hydrogel sensors cannot work independently and require external power. Herein, we report a novel electrochemical-driving self-powered strain sensor based on a multifunctional polyacrylamide/carboxymethyl chitosan/LiCl (PAAM/CMC/LiCl) hydrogel. This hydrogel was facilely prepared by one-step UV-initiated polymerization strategy and integrated high stretchability (a large strain of 640% with a tensile strength of 67 kPa), anti-drying and anti-freezing (−48.27 °C) properties, self-healing ability, as well as good electrical conductivity (0.56 S/m). As an effective electrolyte material, the PAAM/CMC/LiCl hydrogel is directly assembled with Zn and MnO 2 electrodes to form a flexible zinc-ion battery (ZIB), from which a decent specific capacity and desirable stable power output are found even under various mechanical stimuli. Taking advantage of the high strain sensibility of the PAAM/CMC/LiCl hydrogel, a closed loop consisting of the ZIB and a fixed resistor can realize the function of strain sensing and energy storage capabilities simultaneously. This self-powered sensing system has demonstrated high sensitivity, good stability and strong power-generating performance during the real-time monitoring of human activities, which are highly anticipated in the wearable electronics.

Implantable Optical Fiber Sensor for Monitoring the Stress Evolution in Lithium-Sulfur Battery

Direct optical fiber monitor on stress evolution of the sulfur-based cathodes for lithium–sulfur batteries

Monitoring the Strain Evolution of Lithium‐Ion Battery Electrodes using an Optical Fiber Bragg Grating Sensor

In Operando Monitoring the Stress Evolution of Silicon Anode Electrodes during Battery Operation via Optical Fiber Sensors

Real-time monitoring of internal structural deformation and thermal events in lithium-ion cell via embedded distributed optical fibre

Towards Long-Term Monitoring of Commercial Lithium-Ion Batteries Enabled by Externally Affixed Fiber Sensors and Strain-Based Prognostic Strategies

Operando Decoding of Surface Strain in Anode‐Free Lithium Metal Batteries via Optical Fiber Sensor

Diffusion-Induced Transient Stresses in Li-Battery Electrodes Imaged by Electrochemical Quartz Crystal Microbalance with Dissipation Monitoring and Environmental Scanning Electron Microscopy

A highly sensitive stretchable constraint fiber mat sensor with tailored near-zero Poisson's ratio for very early stage of battery over charge/overdischarge monitoring

In-situ measurements of electrochemical stress/strain fields and stress analysis during an electrochemical process

Operando monitoring of dendrite formation in lithium metal batteries via ultrasensitive tilted fiber Bragg grating sensors

An overview on in situ / operando battery sensing methodology through thermal and stress measurements

Operando monitoring of strain field distribution in lithium battery anode via ultra-high spatial resolution optical frequency domain reflectometer

Functional Optical Fiber Sensors Detecting Imperceptible Physical/Chemical Changes for Smart Batteries

Operando monitoring of ion activities in aqueous batteries with plasmonic fiber-optic sensors

State of Charge Estimation for Commercial Li-Ion Battery Based on Simultaneously Strain and Temperature Monitoring Over Optical Fiber Sensors

In-situ STEM Observation of Strain Field Movement in a LiMn2O4 Nanowire Battery

In Situ Measurements of Stress Evolution in Silicon Thin Films During Electrochemical Lithiation and Delithiation

Experimental measurement of electro-chemo-mechanical properties of a composite silicon electrode in lithium ion batteries

A laser-scribed wearable strain sensing system powered by an integrated rechargeable thin-film zinc-air battery for a long-time continuous healthcare monitoring

Flexible self-powered integrated sensing system based on a rechargeable zinc-ion battery by using a multifunctional polyacrylamide/carboxymethyl chitosan/LiCl ionic hydrogel