Abstract:Jet fuel is used as a coolant before it is burned in the combustor of the aircraft. Insoluble particles and surface deposits can impair engine performance. Jet fuel thermal oxidation test (JFTOT) defines the standard test method for evaluation of the deposit formed through heating fuels in tubes caused by thermal oxidation (<400°C). At a higher temperature, fuel in the heating process decomposes leading to surface deposits by coking. In this work, we propose a method to evaluate the security of fuel flowing in the tube at high temperatures (>500°C). The heat transfer and cracking performances of two hydrocarbon fuels which are laboratory modified aviation kerosene (Fuel 1 (ρ=0.85g/cm3) and Fuel 2 (ρ=0.78g/cm3)) have been investigated in a heat-exchanger under supercritical conditions (T=700–770°C, p=2.5–5.5MPa, m=0.4–1.0g/s). The temperature and flow rate in this work are much higher than those in JFTOT. The safe run time (SRT) is used to evaluate the heat transfer security of each fuel. As the temperature increases or the flow rate decreases or the pressure increases, the SRTs of Fuel 1 and Fuel 2 decrease clearly. In general, the heat transfer security of Fuel 1 is better than that of Fuel 2. Moreover, the volumetric heat sink of Fuel 1 is larger than that of Fuel 2. So, the overall performance of Fuel 1 is more excellent when it is used as propellant and coolant for hypersonic aircraft. In consideration of the heat transfer security, heat sink and the required driving force for aircraft, the temperature of fuel at the exit of heat transfer passage should be set as 740°C, the flow rate of fuel should be 0.6–1.0g/s, the pressure of heat transfer passage should be 3.5MPa. Based on these results, we find that the modification of a high density fuel is an effective way to prepare an advanced hydrocarbon fuel.

Research Progress of Catalysts and Initiators for Promoting the Cracking of Endothermic Hydrocarbon Fuels

Low-Temperature-Initiated Cracking of Hydrocarbons to Produce Olefins: Simulation and Comparison of Different Initiators

On the Mechanism of Initiation Steam Cracking of C6 Hydrocarbons by Hyperbranched Poly(amidoamine) (PAMAM) Initiator

A comprehensive review of the thermal cracking stability of endothermic hydrocarbon fuels

A Polyester-Based Initiation Strategy for Achieving High-Efficient Cracking of Hydrocarbon Fuels

Endothermic Reaction of High Heat Sink Hydrocarbon Jet Fuel

ZSM-5 Crystals Grown on the Wall of a Long Tubular Reactor As a Structured Catalyst for Cracking of Endothermic Fuels

Heat Management in Supersonic/Hypersonic Vehicles Using Endothermic Fuel: Perspective and Challenges

Highly Stable Macroinitiator/platinum/hydrocarbon Nanofluids for Efficient Thermal Management in Hypersonic Aircraft from Synergistic Catalysis

Thermal Cracking of Jet Propellant-10 with the Addition of a Core-Shell Macroinitiator

Screening experiments for initiators and initiating mechanism for the cracking of the endothermic hydrocarbon fuel

Cooling and coke deposition of hydrocarbon fuel with catalytic steam reforming

Cracking of Platinum/hydrocarbon Nanofluids with Hyperbranched Polymer As Stabilizer and Initiator

Co3O4 Nanosheet Wrapped Commercial HZSM-5 for Promoting Catalytic Cracking of N-Decane and Anticoking Activities

Coke Deposition Inhibition for Endothermic Hydrocarbon Fuels in a Reforming Catalyst-Coated Reactor

Thermal Cracking and Catalytic Cracking of the Mixing Endothermic Hydrocarbon Fuel

Heat Transfer and Cracking Performance of Endothermic Hydrocarbon Fuel when It Cools a High Temperature Channel

Coking and Gas Products Behavior of Supercritical N-Decane over NiO Nanoparticle/nanosheets Modified HZSM-5

Experimental Study on the Ethanol-Assisted Catalytic Steam Reforming of Endothermic Hydrocarbon Fuel.

An All-in-one Zeolite@ru–al2o3 Nanoplatform Toward Highly Efficient, Anti-Coking, and Recyclable Hydrocarbon Cracking Catalysis

Thermal cracking performance of Al-nanoparticle-containing nanofluids