Abstract:The mechanical properties of resin samples in low-force stereolithography additive manufacturing were affected by the printing orientation, and were investigated and optimized to achieve excellent single or comprehensive tensile strength, compressive strength, and flexural modulus. The resin samples were fabricated using a Form3 3D printer based on light curing technology according to the corresponding national standards, and they were detected using a universal testing machine to test their mechanical properties. The influence of the printing orientation was represented by the rotation angle of the resin samples relative to the x–axis, y–axis and z–axis, and the parameters was selected in the range 0°–90° with an interval of 30°. The multiple regression models for the mechanical properties of the prepared resin samples were obtained based on least square estimation, which offered a foundation from which to optimize the parameters of the printing orientation by cuckoo search algorithm. The optimal parameters for the tensile strength, compressive strength and flexural modulus were 'α = 45°, β = 25°, γ = 90°', 'β = 0°, β = 51°, γ = 85°' and 'α = 26°, β = 0°, γ = 90°', respectively, which obtained the improvements of 80.52%, 15.94%, and 48.85%, respectively, relative to the worst conditions. The mechanism was qualitatively discussed based on the force analysis. The achievements obtained in this study proved that optimization of the printing orientation could improve the mechanical properties of the fabricated sample, which provided a reference for all additive manufacturing methods.

Influence of Irradiation Parameters on the Curing and Interfacial Tensile Strength of HAP Printed Part Fabricated by SLA-3D Printing

Effect of ultraviolet post-curing, laser power, and layer thickness on the mechanical properties of acrylate used in stereolithography 3D printing

Effects of Dispersant Concentration on the Properties of Hydroxyapatite Slurry and Scaffold Fabricated by Digital Light Processing

Effect of Layer Thickness, Support Angle and Post-processing on Properties of SLA Parts

Effects of post-curing duration on the mechanical properties of complex 3D printed geometrical parts

Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D printing

A Study on Biosafety of HAP Ceramic Prepared by SLA-3D Printing Technology Directly.

Effect of Printing Parameters on the Tensile Properties of 3D-Printed Polylactic Acid (PLA) Based on Fused Deposition Modeling

Investigation and Optimization of the Impact of Printing Orientation on Mechanical Properties of Resin Sample in the Low-Force Stereolithography Additive Manufacturing

Influence of Particle Size Distribution on Hydroxyapatite Slurry and Scaffold Properties Fabricated Using Digital Light Processing

Effect of Post-Printing Conditions on the Mechanical and Optical Properties of 3D-Printed Dental Resin

Mechanical properties and wear behaviors analysis of fluorapatite glass-ceramics based on stereolithography 3D printing

Effects of Curing on Photosensitive Resins in SLA Additive Manufacturing

Thermal Studies of Three-Dimensional Printing Using Pulsed Laser Heating

Effect of Hydration Process on the Interlayer Bond Tensile Mechanical Properties of Ultra-High Performance Concrete for 3D Printing

Effect of IR ‐laser treatment parameters on surface structure, roughness, wettability and bonding properties of fused deposition modeling‐printed PEEK / CF

Process Analysis of DLP Photocuring 3D Printing with Modified High-strength Resin

Experimental Investigation of Mechanical Properties of UV-Curable 3D Printing Materials

Effect of Post-Rinsing Time on the Mechanical Strength and Cytotoxicity of a 3D Printed Orthodontic Splint Material

Simulation and Process Analysis of DLP 3D Printing with High-strength Resin

Influence of 3D printing stress wave on residual stress