Abstract:To improve printing fidelity, reducing the slice thickness to eliminate the staircase effect is of great importance for digital light processing (DLP) technology. However, using a thinner slice printing model leads to a longer total printing time in the conventional DLP approach, which significantly reduces printing efficiency. In this work, a tunable pre-curing DLP approach was developed where the relationship between the forming layer thickness and ultraviolet (UV) exposure time is theoretically analyzed, and the curing process of photo-curable solutions is divided into two sub-processes: pre-curing and further curing. In the pre-curing process, the photo-curable solution is initially pre-cured and kept at the pre-gelled state due to continuous UV exposure during subsequent DLP printing. Then, the pre-cured photo-curable solution is quickly cured to form a designed thickness in each printing cycle. Also, the UV absorbing agent is added to the photo-curable hydrogel solutions to regulate the pre-curing process. Using a 10 μm slice for DLP printing, the total printing time of the tunable pre-curing DLP is approximately 5.6% of the conventional DLP, and the staircase effect on the surface is significantly eliminated using 10 μm slice tunable pre-curing DLP approach, which leads to a better printing fidelity. Thus, both printing fidelity and efficiency are significantly and simultaneously improved by the tunable pre-curing DLP approach. Moreover, the reduction of UV exposure time and slice thickness is beneficial for cell viability during DLP bioprinting of thick bulk structures, which is demonstrated by the printing of PC12 cell-laden gelatin methacrylate (GelMA) bioinks. Using the tunable pre-curing DLP approach, the PC12 cells achieved higher cell viability (90.2 ± 6.1%) and better cell morphology than the conventional DLP approach (54.5 ± 4.8%). The tunable pre-curing DLP approach provides a promising alternative to extend the application of DLP printing greatly.

Thermal Studies of Three-Dimensional Printing Using Pulsed Laser Heating

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Laser‐Assisted Direct Ink Writing for High‐Fidelity Fabrication of Elastomeric Complex Structures

Thermo-mechanical Modeling of Laser-Driven Non-Contact Transfer Printing: Two-Dimensional Analysis

Thermal responsive photopolymerization 3D printed shape memory polymers enhanced by heat transfer media

Fabrication of three-dimensional microstructures based on 1064 nm laser-induced thermoplastic expansion

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Modeling the Printability of Photocuring and Strength Adjustable Hydrogel Bioink During Projection-Based 3D Bioprinting.

High-fidelity and high-efficiency additive manufacturing using tunable pre-curing digital light processing

3D Printing by Multiphase Silicone/Water Capillary Inks

A Heating-Assisted Direct Ink Writing Method for Preparation of PDMS Cellular Structure with High Manufacturing Fidelity

3D printing of thermosets with diverse rheological and functional applicabilities

High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing

Self‐Healing, Photothermal‐Responsive, and Shape Memory Polyurethanes for Enhanced Mechanical Properties of 3D/4D Printed Objects

A Comparative Study on 3D Printed Silicone-Epoxy/acrylate Hybrid Polymers Via Pure Photopolymerization and Dual-Curing Mechanisms

Photocurable High-Energy Polymer-Based Materials for 3D Printing

Research on Thermal Evolution of Polydimethylsiloxane Flexible Sample with a Practical 3-D Fib Power Deposition Model

Photothermal synergy mechanism in near-infrared photopolymerization for 3D printing acceleration and mechanical enhancement

Effect of ultraviolet post-curing, laser power, and layer thickness on the mechanical properties of acrylate used in stereolithography 3D printing

Mechanics of Shape Distortion of DLP 3D Printed Structures During UV Post-Curing.

Self‐Regulative Direct Ink Writing of Frontally Polymerizing Thermoset Polymers