Abstract:Laser powder bed fusion (LPBF) of AlMgScZr alloy has garnered significant attention as a high-strength aluminum alloy. However, its low modulus, Portevin-Le Chatelier (PLC) behavior, and weak strain hardening capability restrict its application in the aerospace sector. In this study, SiC/AlMgScZr composites with different SiC content have been successfully fabricated using LPBF. The inherent bimodal grain structure of AlMgScZr alloy was not completely altered by the addition of SiC particles. However, with increasing SiC content, heat accumulation increased, and the solidification cooling rate decreased. This led to an increase in the size of alpha-Al grains in the 5 wt% SiC/AlMgScZr composites. Meanwhile, movable dislocations can be efficiently preserved inside the grains, where they effectively accumulate and become entangled. Consequently, the strain hardening capability of the 5 wt% SiC/AlMgScZr composites improved by approximately 58 % compared to AlMgScZr alloy, with a strain hardening index (n) reaching 0.29. Additionally, the addition of SiC particles led to an increase in the elastic modulus (81.0 GPa). Furthermore, the reaction between Mg atoms and SiC particles resulted in the formation of Mg2Si, which altered the distribution of Mg elements and initiated the reactive precipitation of a Mg-rich phase. There is no competition between the diffusive migration of solute atoms and the motion of movable dislocations within the composites. The additional SiC particles effectively eliminated the PLC effect in the LPBF of AlMgScZr alloy. This work provides essential guidance for developing high-strength and highstiffness aluminum matrix composites with excellent processing properties in LPBF technology.

Microstructure, mechanical and anti-ablation properties of Mg-modified C/ C-ZrC-SiC composites prepared by sol-gel technology

Ablation Behaviour and Mechanism of Mg-modified ZrC-SiC Composite in Plasma Ablation Flame

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties

Microstructures and Ablation Properties of C/C−SiC−ZrC Composites Prepared Using C/C Skeletons with Various Densities

Enhanced Anti-Ablation Performance of Carbon/carbon Composites Modified with ZrC-SiC

Effect of ZrC–SiC Content on Microstructure and Ablation Properties of C/C Composites

Improving the sinterability of ZrC-SiC composite powders by Mg addition

Microstructures and Ablation Properties of Al-Si Modified C/C Composites Produced by the Reactive Melt Infiltration Method

Effects of ZrC/SiC Ratios on Mechanical and Ablation Behavior of C/C–ZrC–SiC Composites Prepared by Carbothermal Reaction of Hydrothermal Co-Deposited Oxides

The Microstructure, Ablative Resistance and Mechanical Properties of C/C-(Zr, V, Si)C Composites after Ablation

Laser Ablation Resistance and Mechanism of Si-Zr Alloyed Melt Infiltrated C/C-SiC Composite

The effect of carbon source addition order during sol-gel process on the properties of C/C-ZrC-SiC composites

Microstructure and mechanical properties of SiC reinforced AlSi10Mg composites fabricated by laser metal deposition

Microstructure and ablation properties of Si-Mo-Zr modified C/C composites by reactive melt infiltration

Mechanical Properties and Ablation Behavior of C/C-ZrC and C/C-ZrC-SiC Composites Prepared by Precursor Infiltration and Pyrolysis Combined with Chemical Vapor Infiltration

Influence of SiC Particles on the Microstructure and Mechanical Behaviors of AlMgScZr Alloy Processed by Laser Powder Bed Fusion

Enhanced ablative resistance of C/C composites with densified ZrB 2 -based ceramics by incorporation of Mo as interface layer

Strengthening Mechanism and Damping Properties of SiCf/Al-Mg Composites Prepared by Combining Colloidal Dispersion with a Squeeze Melt Infiltration Process