Abstract:Ablation resistance of C/C-SiC composite prepared via Si-Zr alloyed reactive melt infiltration was evaluated using a facile and economical laser ablation method. Linear ablation rates of the composite increased with an increase in laser power densities and decreased with extended ablation time. The C/C-SiC composite prepared via Si-Zr alloyed melt infiltration presented much better ablation resistance compared with the C/SiC composite prepared by polymer infiltration and pyrolysis process. The good ablation resistance of the composite was attributed to the melted ZrC layer formed at the ablation center region. Microstructure and phase composition of different ablated region were investigated by SEM and EDS, and a laser ablation model was finally proposed based on the testing results and microstructure characterization. Laser ablation of the composite experienced three distinct periods. At the very beginning, the laser ablation was dominated by the oxidation process. Then for the second period, the laser ablation was dominated by the evaporation, decomposition and sublimation process. With the further ablation of the composite, chemical stable ZrC was formed on the ablated surface and the laser ablation was synergistically controlled by the scouring away of ZrC melts and evaporation, decomposition and sublimation process.

Ablation Behaviour and Mechanism of Mg-modified ZrC-SiC Composite in Plasma Ablation Flame

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Microstructure, mechanical and anti-ablation properties of Mg-modified C/ C-ZrC-SiC composites prepared by sol-gel technology

Ablation Behavior of a C/C-ZrC-SiC Composite Based on High-Solid-loading Slurry Impregnation under Oxyacetylene Torch

Effect of ZrC–SiC Content on Microstructure and Ablation Properties of C/C Composites

Laser Ablation Resistance and Mechanism of Si-Zr Alloyed Melt Infiltrated C/C-SiC Composite

Ablation resistance and mechanism of SiC/ZrC-ZrB2 double layer coating for C/C composites under plasma flame

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Ablation Resistance and Mechanism of SiC/ZrC-ZrB2double Layer Coating for C/C Composites under Plasma Flame

Ablation Behavior of Zr–Al(Si)–C Layered Carbides Modified 3D Needled C/SiC Composites

Effects of Zr/Ti Ratios on the Structure and Ablation Characteristics of (Zr,ti)c-Sic Composites

Ablation Properties of 2D C/SiC-ZrB2 Composite

Ablation Performance of C/C-ZrC-SiC Composites with In-Situ YSi2-doped ZrC-SiC-ZrSi2 Coating under Oxyacetylene Torch

Ablation Behavior and Mechanism of C/C–ZrC–SiC Composites under an Oxyacetylene Torch at 3000°C

Enhanced Anti-Ablation Performance of Carbon/carbon Composites Modified with ZrC-SiC

Ablation Behavior of Sharp-Shape C/C-SiC-ZrB2 Composites under Oxyacetylene Flame

Microstructure evolution and ablation mechanisms of Csf/ZrB2-SiC composites at different heat fluxes under air plasma flame

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Ablation Resistance of Different Coating Structures for C/ZrB2–SiC Composites under Oxyacetylene Torch Flame

Ablation performance of C/C-ZrC-SiC composites with in-situ YSi 2 -doped ZrC-SiC-ZrSi 2 coating under oxyacetylene torch

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method