Abstract:The ion beam sputtering (IBS) of smooth mono-elemental Si with impurity co-deposition is extended to a pre-rippled binary compound surface of fused silica (SiO2). The dependence of the rms roughness and the deposited amount of Al on the distance from the Al source under Ar+ IBS with Al co-deposition was investigated on smooth SiO2, pre-rippled SiO2, and smooth Si surfaces, using atomic force microscopy and X-ray photoelectron spectroscopy. Although the amounts of Al deposited on these three surfaces all decreased with increasing distance from the Al target, the morphology and rms roughness of the smooth Si surface did not demonstrate a strong distance dependence. In contrast to smooth Si, the rms roughness of both the smooth and pre-rippled SiO2 surfaces exhibited a similar distance evolution trend of increasing, decreasing, and final stabilization at the distance where the results were similar to those obtained without Al co-deposition. However, the pre-rippled SiO2 surfaces showed a stronger modulation of rms roughness than the smooth surfaces. At the incidence angles of 60° and 70°, dot-decorated ripples and roof-tiles were formed on the smooth SiO2 surfaces, respectively, whereas nanostructures of closely aligned grains and blazed facets were generated on the pre-rippled SiO2, respectively. The combination of impurity co-deposition with pre-rippled surfaces was found to facilitate the formation of novel types of nanostructures and morphological growth. The initial ripples act as a template to guide the preferential deposition of Al on the tops of the ripples or the ripple sides facing the Al wedge, but not in the valleys between the ripples, leading to 2D grains and quasi-blazed grating, which offer significant promise in optical applications. The rms roughness enhancement is attributed not to AlSi, but to AlOxFy compounds originating mainly from the Al source.

Meniscus and Spin Coating Methods for Coating SiO<sub>2</sub> Sol-Gel Antireflective Film on Beam Sampling Grating

A novel trilayer antireflection coating using dip-coating technique

Determination Of Refractive Indices And Thicknesses Of Ba0.7sr0.3tio3 Films With And Without Mgo (001) Buffer Layer On Silicon Substrate

Sol-gel Preparation of a Silica Antireflective Coating with Enhanced Hydrophobicity and Optical Stability in Vacuum

Effects of Coating Methods on Microstructure and Optical Properties of Mesoporous Silica Films

Mechanical Polishing to Improve Uniformity of Beam Sampling Grating and Its Effects on Laser-Induced Damage

Preparation of Gradient Refractive Index Films on Glass Surface and Its Anti-Reflection Properties

Chemical Mechanical Polishing to Improve the Efficiency Uniformity of Beam Sampling Grating

Facile Fabrication and Antifogging Test of a Calcination-Free SiO_2 Superhydrophilic Coating

SiC/W/Ir Multilayer-Coated Grating for Enhanced Efficiency in 50-100 Nm Wavelength Range in Seya-Namioka Mount.

Enhanced antireflective and laser damage resistance of refractive-index gradient SiO2 nanostructured films at 1064 nm

Design and Fabrication of Silicon-Blazed Gratings for Near-Infrared Scanning Grating Micromirror

Fabrication of biomimetic high performance antireflective and antifogging film by spin-coating.

Preparation and Properties of Methyl-Situ-modified Sol-Gel Hydrophobic Anti-Reflective SiO2 Coating

Comparison of Bare and Sol-Gel Coated of Mitigated Site on Fused Silica

Reactive Ion Beam Etching of Multilayer Diffraction Gratings with SiO 2 As the Top Layer

All-dielectric High-Efficiency Reflection Gratings Made with Multilayer Thin-Film Coatings

Study on the Properties and Structure of SiO2 Anti-reflective Coating Prepared by Stepped Base/Acid Catalyzed Process

Effects of alkali metal ion on imprinting GRIN microstructure in GeS2-Ga2S3-MCl (M=Na, K, Cs) glasses for visible to mid-infrared microgratings

Fabrication of Slanted Grating Utilizing Reaction Ion Beam Etching: The Role of CHF<inf>3</inf> and O<inf>2</inf> Etching Atmosphere

Nanostructures on Fused Silica Surfaces Produced by Ion Beam Sputtering with Al Co-Deposition