Abstract:Within the framework of the proposed research, emphasis was placed on application of magnetic fields to semiconductor growth systems. Through complementary support by the Air Force and DARPA, we were able to acquire a superconducting magnet which can provide axial magnetic fields of up to 30 kGauss for melt stabilization in the NASA facility for heat pipe based vertical BridgmanStockbarger growth. It was found that axial fields up to 3 kGauss do not affect the growth behavior nor the macro-segregation behavior in the system Ge(Ga). Applied fields are found to significantly alter the radial dopant distribution, which is attributed to alterations in the spatial orientation of convective cells. Increasing the applied magnet field to 30 kGauss is found to have a fundamental effect on dopant segregation. The initial transient segregation behavior is identical with that predicted by Tiller e t al. for diffusion controlled plane front solidification. Within the transient region, the dopant concentration increased by in excess of 600%, a concentration increase which in the magnitude has thus far only been observed in the ASTP experiment conducted in the reduced gravity environment of space. While the apparent achievement of diffusion controlled growth, as indicated by theory, is contingent on the validity of the available database, the experimental results demonstrate that magnetic melt stabilization can be valuable in emulating a limited spectrum of reduced gravity conditions. The experiments also point to the need, in space, for extended equilibration of melts prior to solidification, and alternatively, at the need for force convective mixing in a microgravity environment. . Emphasis was also place on the exploration of the potential of KC-135 flights for preliminary studies of the effects of reduced gravity environment on the wetting behavior of semiconductor systems in growth configuration. The experiments indicated different solidification characteristics; however, it was not possible to obtain quantitative data on wetting. The primary problem consisted of deficiencies of the available hardware. The limited number of experiments conducted does not permit any conclusions on the merits of KC-135 flights for semiconductor processing research. It is established, however, that the effective use of this facility will require acquisition of appropriate hard ware. At professional meetings, presentations were made on the potential of reduced gravity environment of R&D in materials processing. -49https://ntrs.nasa.gov/search.jsp?R=19890004306 2019-11-28T09:08:54+00:00Z

Non-isothermal Wetting of an Al Alloy Pin by Al-Si Melt under Terrestrial and Microgravity Conditions

Influence of Solidification Parameters on the Amount of Eutectic and Secondary Arm Spacing of Al–7wt% Si Alloy Solidified under Microgravity

Microstructure Analysis of Al-7 wt% Si Alloy Solidified on Earth Compared to Similar Experiments in Microgravity

Metastable Liquid Properties and Surface Flow Patterns of Ultrahigh Temperature Alloys Explored In Outer Space

Heat Flow Control and Segregation in Directional Solidification: Development of an Experimental and Theoretical Basis for Bridgman-Type Growth Experiments in a Microgravity Environment

Freezing Shrinkage Dynamics and Surface Dendritic Growth of Floating Refractory Alloy Droplets in Outer Space

Wrinkled Shrinkage on Surface Monophasic Structure of Floating Refractory Alloy Droplets Solidified in Space Environment

Contact angle ageing and anomalous capillary flow of a molten metal

Three-dimensional numerical analysis and experimental confirmation for investigating the ground-based lateral droplet ejection toward microgravity simulation

Synchronous Observation on the Spontaneous Transformation of Liquid Metal under Free Falling Microgravity Situation

Microgravity studies of solidification patterns in model transparent alloys onboard the International Space Station

Bubble generation mechanisms in microchannel under microgravity and heterogeneous wettability

An Experimental Characterization of Capillary Driven Flows in Microgravity

Spiral eutectic growth dynamics facilitated by space Marangoni convection and liquid surface wave

Heat-Mass Transfer and Related Microstructures in TiAl-Based Alloys Directionally Solidifying in the Earth Gravity and Microgravity

Unraveling the mechanisms of aluminum solidification under hyper-gravity condition from molecular dynamics simulations

Capillary driven flows in microgravity

Simulation of Nucleation and Coalescence of Second Phase Droplets During Earth-Based Solidification Process of Immiscible Alloys

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Simulation of Single Bubble Dynamic Process in Pool Boiling Process under Microgravity Based on Phase Field Method

Characterization of a capillary driven flow in microgravity by means of optical technique