Abstract:Containerless state is one of the main characteristics of the space environment, which avoids the contamination from crucibles, and provides a special condition to materials research in outer space. Various levitation techniques have been established to realize the containerless state on the ground. Electrostatic levitation applies the Coulomb force on the charged sample in an electrostatic field to counteract the gravity and achieve containerless state. Compared with other levitation techniques, electrostatic levitation has many advantages: It is applicable to various kinds of materials that holds sufficient surface electric charges, such as metals, oxides and polymers. Its levitation stability can be maintained in a very broad temperature range, since the levitation and heating are controlled independently. It exerts negligible disturbance to the inner part of the sample, and hence is favorable for the achievement of high undercooling and rapid solidification of liquid alloys. In addition, it can be conducted in vacuum and eliminates the influence of gas medium. Therefore, electrostatic levitation becomes an important approach to the study of containerless processing for advanced materials. Since there exists no three-dimensional potential well in the electrostatic field, great difficulties are brought about to the research on the control of levitation stability. In the recent decades, containerless processing of materials by electrostatic levitation were performed in NASA (National Aeronautics and Space Administration, USA), DLR (German Aerospace Center) and JAXA (Japan Aerospace Exploration Agency). Supported by the Creative Research Team Project of the National Natural Science Foundation of China, an electrostatic levitator with single-axis feedback control system was developed by Professor Wei Bingbo’s group in Northwestern Polytechnical University. Both experimental and theoretical investigations were accomplished to solve the four key problems of electric field optimization, sample position detecting, sample charging control and levitation voltage minimization for stable levitation. Various types of materials, such as metals (AZ91D magnesium alloy and ball of aluminum foil), inorganic materials (graphite, C/C composite materials, red phosphorus and silicon dioxide) and organic materials (carbon fiber reinforced resin, liquid crystal and mung bean) have been successfully levitated in the experiments. The typical levitation experiment results are illustrated in Figure 1. The levitated sample exhibits fast control response and satisfactory levitation stabilization. It takes only 0.1 s to realize the stable levitation in upright direction, and the fluctuation is smaller than 0.3 mm (Figure 2(a)). The constraining force produced by spherical electrodes ensures the horizontal stability with a small fluctuation below 0.5 mm (Figure 2(b)).

Synchronous Observation on the Spontaneous Transformation of Liquid Metal under Free Falling Microgravity Situation

Research on Melt Wettability Measurements under Microgravity

Soildification of Ternary Eutectic Alloys under Simulated Space Conditions

Perspective on liquid metal enabled space science and technology

Electromagnetic levitation containerless processing of metallic materials in microgravity: thermophysical properties

Liquid Metal Transformers

Freezing Shrinkage Dynamics and Surface Dendritic Growth of Floating Refractory Alloy Droplets in Outer Space

Diverse transformations of liquid metals between different morphologies.

Setup and Experiment for the Fusion of Molten and Solidified Micro-droplets in a Simulated Micro-gravity Environment

Electrically Induced Transformations Of Liquid Metal Among Different Morphologies

Insights into the impact and solidification of metal droplets in ground-based investigation of droplet deposition 3D printing under microgravity

Containerless Processing by Single-Axis Electrostatic Levitation

Migration Dynamics for Liquid/solid Interface During Levitation Melting of Metallic Materials

Spiral eutectic growth dynamics facilitated by space Marangoni convection and liquid surface wave

Suppression of Gravity Effects on Metal Droplet Deposition Manufacturing by an Anti-Gravity Electric Field

Containerless Solidification of Undercooled Ag-Cu-Sb Alloy Droplets under Microgravity Conditions

Liquid Metal Spring: Oscillating Coalescence and Ejection of Contacting Liquid Metal Droplets

Experimental Investigation of the Sedimentation Behavior of Metal Droplets in Liquid–liquid Systems

Decoupling Effect Stimulated Independent Dendrite Growth of Eutectic Phases under Microgravity and Containerless States

Metastable Liquid Properties and Surface Flow Patterns of Ultrahigh Temperature Alloys Explored In Outer Space

Three-dimensional numerical analysis and experimental confirmation for investigating the ground-based lateral droplet ejection toward microgravity simulation