Abstract:This work conducts an integrated experimental and simulation research on the multiple mechanisms of performance improvement of a metal matrix composite via a new severe plastic deformation method, i.e., elliptical cross-section torsion extrusion (E-TE). Results evidence that the E-TE efficiently homogenizes the particle distribution and refines the composite’s microstructure, thus yields a simultaneous improvement of the strength and ductility. The microstructure refinement is dominated by mechanical deformation and processing temperature and mainly attributed to the joint effect of three mechanisms: (1) fragmenting of large grains and smashing of particle bands/clusters due to extensive shear deformation of the E-TE; (2) higher driving force and more nucleation sites provided by fine precipitation and reinforced particles for dynamic recrystallization (DRX) through accelerating dislocation generation and pinning dislocation movement, as well as additional DRX by coarse particles via particle stimulated nucleation; (3) the impeding of grain growth by dispersed particles. Moreover, increasing processing temperature results in the successive coarsening and dissolution of precipitations; the precipitation dissolution deteriorates the grain refinement and weakens the strength of the particle/matrix interface. Full-field crystal plasticity simulations reveal that the strength improvement of the E-TE processed composite is mainly attributed to grain boundary strengthening, while reinforced particles sustain high stress and strengthen the matrix as well, and these contributions increase with the decrease of the matrix’s grain size. The grain refinement and particle homogenization also improve the fracture toughness and ductility of the composite by retarding the generation of damages and impeding the crack propagation.

Achieving High-Quality Tungsten–Copper Composites Via Deformation-Driven Metallurgy

Microstructure and properties of tungsten copper produced by hot deformation densification technology

Tungsten Copper Composite Fabricated by Compound Plastic Deformation Technologies

Enhanced Tensile Ductility of Tungsten Microwires Via High-Density Dislocations and Reduced Grain Boundaries

Deformation-driven Metallurgy of SiC Nanoparticle Reinforced Aluminum Matrix Nanocomposites

Deformation Processed Cu-15 Wt Pct Cr Composite Synthesized by Hot Hydrostatic Extrusion of Mechanical Milled Powders

Ameliorating Strength-Ductility Efficiency of Graphene Nanoplatelet-Reinforced Aluminum Composites Via Deformation-Driven Metallurgy

Deformation-driven Metallurgy of Graphene Nanoplatelets Reinforced Aluminum Composite for the Balance Between Strength and Ductility

Study on Vacuum Melting and Casting of Tungsten and Copper with Dovetail Groove Structure

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

Recent Advances in W–Cu Composites: A Review on the Fabrication, Application, Property, Densification, and Strengthening Mechanism

Mechanisms of Simultaneously Improving the Strength and Ductility of an In-Situ Tib &Lt;sub>2</sub>/al-Zn-mg-cu Composite by Elliptical Cross-Section Torsion Extrusion

Review of Deformation/Failure/Strengthening Mechanism of Tungsten Alloys

A comparative study on microstructure and mechanical properties of wire-arc directed energy deposited Al–Zn–Mg–Cu alloy based on the cold metal transfer technology

Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite

Deformation Stored Energy and Dynamic Recrystallization Behavior of Pure Tungsten Processed by Multiple Directional Forging

Effect of the rolling plastic deformation on microstructure and properties of W-Cu composite

Research Progress in W-Ni-Fe Tungsten Heavy Alloys by Deformation Strengthening Processing

Engineering performance of tungsten network reinforced copper matrix composites synthesized by selective laser melting and infiltration

A Simple Approach to Obtaining Enhanced Mechanical Properties of Graphene/copper Composites with Heterogeneous Grain Structures

Deformation and failure by weaving dislocation networks in body-centered-cubic tungsten