Abstract:The unique combination of alternate thin layers of metal and complete thermoplastic fiber-reinforced polymer (FRP) gives birth to a new generation of hybrid thermoplastic fiber metal laminates (T-FML), which are considered for high impact resistance applications. T-FML is fabricated by Ti6Al4V metal alloy and ultra-high molecular weight polyethylene (UHMWPE) with infusible liquid methyl methacrylate thermoplastic resin (Elium®). The impact damage resistance of T-FML depends on the interlaminar interface and metal thermoplastic composite interface (MTCI). Higher interfacial properties provide improved stiffness and resistance to the delamination of crack growth in T-FML during an impact loading. Fiber and metal surfaces are modified to enhance the interlaminar interface and MTCI. The fiber surface is treated by a simple deposition of polydopamine (PDA) with the addition of 0.03 wt.% multiwalled carbon nanotubes (MWCNT), and the metal surface is treated by using an electrochemical process. Experimental investigations were carried out on the T-FML composite laminates to determine the low-velocity impact behavior at three different impact energies (43 J, 50 J, 80 J). The results revealed that the non-impacted Ti alloy face sheet on the rear side of the T-FML plays an important role in absorbing the impact energy by creating a single crack in the rolling direction. Also, the single crack growth is suppressed when the MTCI is improved after the fiber and metal surface treatment.Graphical abstractMetal and fiber surface treatment enhances the delamination resistance at the metal and thermoplastic composite interface offering lower structural damage.

Low velocity impact response of fiber metal laminates with nano-patterned metal surfaces

Metal Surface Nanopatterning for Enhanced Interfacial Adhesion in Fiber Metal Laminates

Micro Failure Analysis of Fiber Metal Laminates

Finite Element Analysis of Configuration and Fiber Orientation Effects on Fiber Metal Laminates Subjected to Low Velocity Impact

Experimental and theoretical study on residual ultimate strength after impact of CF/PEEK-titanium hybrid laminates with nano-interfacial enhancement

Influence of Impactor Shape on Low-Velocity Impact Behavior of Fiber Metal Laminates Combined Numerical and Experimental Approaches

Numerical and experimental investigation on the oblique successive impact behavior and accumulated damage characteristics of fiber metal laminates

Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates

Investigation on Impact Behavior of FMLs under Multiple Impacts with the Same Total Energy: Experimental Characterization and Numerical Simulation

Damage behavior and dynamic response of nano-silica reinforced aluminum 2024-T3/GFRP composite laminate subjected to high-velocity impact

Investigating the Influence of Nano-Silica on Low-Velocity Impact Behavior of Aluminium-Glass Fiber Sandwich Laminate

On impact behavior of fiber metal laminate (FML) structures: A state-of-the-art review

Effects of surface pre-treatment and adhesive quantity on interface characteristics of fiber metal laminates

Residual tension behavior and damage evolution mechanisms of fiber metal laminates with various low-velocity impacted damage

Fatigue Crack Growth in Fiber-Metal Laminates

Investigation on Impact Damage and Residual In-Plane Compression Strength of FML Laminates

Effect of Metal Type on the Energy Absorption of Fiber Metal Laminates under Low-Velocity Impact

Soft impact of GLARE fiber metal laminates

Hygrothermal aging effects on fiber-metal-laminates with engineered interfaces

Simulation on Impact Response of FMLs: Effect of Fiber Stacking Sequence, Thickness, and Incident Angle

Influence of UHMWPE fiber and Ti6Al4V metal surface treatments on the low-velocity impact behavior of thermoplastic fiber metal laminates