Abstract:Effect of nano‐silica on fatigue behavior of glass fiber‐reinforced epoxy composite (GFEC) laminate. Examination of damage patterns through scanning electron microscope analysis of the fractured surface. GFEC with 3 wt% of nano‐silica shows improved tensile and fatigue strength. The aim of this study is to assess the impact of nano‐silica in glass fiber‐reinforced epoxy composite (GFEC) subjected to static and fatigue loading. Laminates were prepared in compression molding machine followed by the tensile test and tension‐tension fatigue testing at five different stress levels (from 50% to 90% of ultimate tensile strength). The addition of 3 wt% of nano‐silica with epoxy improved the tensile and fatigue strength as compared to neat GFEC. Scanning electron microscope (SEM) images of the fractured specimen showed the damage pattern which indicates that neat GFEC laminate exhibited damage patterns characterized by fiber breakage and matrix cracking. On the other hand, the modified GFEC with nano‐silica showed damage patterns including fiber pullout accompanied by fiber breakage and matrix cracking. During cyclic loading, the stress–strain hysteresis loop shows a reduced slope, indicating a decrease in the dynamic modulus of the specimen. This reduction in slope signifies a loss of stiffness during cyclic loading, particularly at high‐stress levels. The highest dynamic modulus at high‐stress levels indicates a rapid progression of severe damage and a shorter fatigue life. On the other hand, at low‐stress levels, the lower magnitude of dynamic modulus suggests a moderate damage progression and a longer fatigue life. Highlights Effect of nano‐silica in GFEC under static and fatigue loading conditions. GFEC with 3 wt% of nano‐silica shows improved tensile and fatigue strength. Examination of damage patterns through SEM analysis of the fractured surface. Depiction of the failure modes using damage pattern under fatigue loading. Comparison of fatigue life and dynamic modulus for neat and modified GFEC.

Investigating the Influence of Nano-Silica on Low-Velocity Impact Behavior of Aluminium-Glass Fiber Sandwich Laminate

Low velocity impact response of fiber metal laminates with nano-patterned metal surfaces

Damage behavior and dynamic response of nano-silica reinforced aluminum 2024-T3/GFRP composite laminate subjected to high-velocity impact

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

Mechanical and low velocity impact behaviour of intra-ply glass/kevlar fibre reinforced nano-silica and micro-rubber modified epoxy resin hybrid composite

Effect of nano‐silica on fatigue behavior of glass fiber‐reinforced epoxy composite laminates: A Weibull distribution approach

Effect of Nanoclay Addition on Mechanical and Microstructure Properties of E-Glass Fiber and AA2022 Metal Skin Reinforced Epoxy Laminates

Effect of silica particle size and filler content on the fracture properties of epoxy resin composite

Comparative Study on the Influence of Hybrid Nano Fillers Modified Epoxy in the Mechanical Behavior of GLARE Laminates

Effect of nanosilica on low‐velocity impact and compression after impact properties of continuous carbon fiber‐reinforced epoxy composites manufactured by 3D printing

Advanced Fiber Metal Laminates Filled with Silicon Dioxide Nanoparticles with Enhanced Mechanical Properties

A study of the manufacture of fiber aluminum laminates reinforced with glass and the effect of interfacial adhesive bonding on the impact’s behavior

Assessments of Secondary Reinforcement of Epoxy Matrix-Glass Fibre Composite Laminates through Nanosilica (SiO2)

Experimental investigation on the compression‐after‐double‐impact behaviors of GFRP laminates embedded with aluminum mesh

Interlaminar mechanical properties of nano- and short-aramid fiber reinforced glass fiber-aluminum laminates: a comparative study

Role of Surface Functionalized Crystalline Nano-silica on Mechanical, Fatigue and Drop Load Impact Damage Behaviour of Effective Stacking Sequenced E-glass Fibre-reinforced Epoxy Resin Composite

Effect of locally deposited nanosilica particles on interlaminar fracture toughness of high glass-transition temperature epoxy carbon fiber-reinforced composites

Nano-hybridization effects of nano-silica and nano-graphene platelet on mechanical properties of E-glass/epoxy nanocomposites

Enhanced Mechanical and Thermal Properties in Epoxy-Based Glass Fabric Composites via Nano Silica Integration

Optimization of low-velocity impact behavior of FML structures at different environmental temperatures using taguchi method and grey relational analysis

Improvement of Impact and Water Barrier Properties of GLARE by Incorporation of Different Types of Nanoparticles