Abstract:Overcoming the inherent strength-ductility trade-off remains a significant challenge in metallic materials. Most of the high-strength Mg-alloys having uniform ultrafine/fine-grained structure with a strong texture exhibit poor ductility at room temperature. Here, we prepared a novel multiscale hetero-structure in Mg-9Al-1Zn (AZ91) alloy, with a simultaneous high ultimate tensile strength and uniform ductility, i.e. ~400 MPa and ~14.5%, which is not accessible to previously reported uniform-grained Mg-alloys. Especially, the present multiscale hetero-structured AZ91 alloy is several times more ductile along with much enhanced toughness compared to its uniform-grained counterparts having comparable tensile strength. The multiscale microstructural heterogeneities, consisting of bimodal-structured (coarse grain ~10-100 μm and fine grain ≤10 μm) center-region and fine-grained surface-layer, were imparted by a new rolling process that combines advantages of both accumulative rolling bonding (ARB) and hard plate rolling (HPR). Using quasi-in-situ electron backscattered diffraction (EBSD) characterizations and slip trace analysis, the superior strength-ductility synergy was discussed in terms of the substantial activation of multiple strain accommodation mechanisms. Due to the high mechanical incompatibility of the multiscale hetero-structure, the hard-to-activate non-basal slips have occurred frequently in fine grains of both center-region and surface-layer. Moreover, the basal-oriented coarse grain in the bimodal-structured center-region plays a prominent role in the dislocation slip behavior of its neighboring fine grains, as reflected by a unique encircled slip trace distribution in them. Our findings reveal that multiscale hetero-structure enables the concurrent activation of various plastic deformation mechanisms. Thereby, the multiscale hetero-structure imparts a pronounced hetero-deformation induced hardening, contributing to enhanced strain-hardening ability, gaining an improved strength-ductility synergy. Our work could shed some light on designing and preparing strong and ductile metallic materials, by tailoring multiscale microstructural heterogeneity using a simple rolling technique.

Achieving Superior Strength-Ductility Synergy in a Heterostructured Magnesium Alloy Via Low-Temperature Extrusion and Low-Temperature Annealing

Enhanced strength-ductility synergy and activation of non-basal slip in as-extruded Mg–Zn–Ca alloy via heterostructure

Tailoring strength and ductility of Mg97Y2Zn1 alloy through the architecture of heterogeneous lamellar structure by large-ratio hot extrusion

Heterogeneous Fiberous Structured Mg-Zn-Zr Alloy with Superior Strength-Ductility Synergy

Mechanistic Study of Mg-Mn-Al Extrusion Alloy with Superior Ductility and High Strength

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

Achieving High Strength-Ductility Synergy in a Dilute Mg-Gd-Zn-Zr Alloy with Heterogeneous Structure Via Hot Extrusion

Development of High-Performance Mg–Zn–Ca–Mn Alloy Via an Extrusion Process at Relatively Low Temperature

High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy

Achieving superior mechanical properties in a low-alloyed magnesium alloy via low-temperature extrusion

Understanding the Deformation Behaviours of Mg Alloys with Dispersed Non-Basal Grain-Embedded Orientation Heterostructures

Deformation mechanisms in a novel multiscale hetero-structured Mg alloy with high strength-ductility synergy

Achieving High Strength-Ductility Synergy in Mg-Gd-Zn-Zr Alloy by Controlling Extrusion Processes Parameters

Origins of High Ductility Exhibited by an Extruded Magnesium Alloy Mg-1.8Zn-0.2Ca: Experiments and Crystal Plasticity Modeling

Achieving High Strength-Ductility Synergy in Low-Alloyed Mg-Li-Er Extrusion Alloys via Tailoring Bimodal-Grained Structure

Developing Novel Multiscale Hetero-Structure in Mg-Alloy for High Strength-Ductility Synergy by Short-Routed Rolling

Cyclic Deformation Behavior of a High-Strength Low-Alloy (HSLA) Magnesium Alloy with Heterostructures

Achieving Strength-Ductility Balance in AZ31-WE43 Mg Alloys by Symmetric Extrusion-Shear Process at Various Temperatures

Excellent mechanical properties of an ultrafine-grained quasicrystalline strengthened magnesium alloy with multi-modal microstructure

A High-Ductility Mg–Zn–Ca Magnesium Alloy

Effect of Initial Microstructure Prior to Extrusion on the Microstructure and Mechanical Properties of Extruded AZ80 Alloy with a Low Temperature and a Low Ratio