Abstract:Overcoming the inherent strength-ductility trade-off remains a significant challenge in metallic materials. Most of the high-strength Mg-alloys having uniform ultrafine/fine-grained structure with a strong texture exhibit poor ductility at room temperature. Here, we prepared a novel multiscale hetero-structure in Mg-9Al-1Zn (AZ91) alloy, with a simultaneous high ultimate tensile strength and uniform ductility, i.e. ~400 MPa and ~14.5%, which is not accessible to previously reported uniform-grained Mg-alloys. Especially, the present multiscale hetero-structured AZ91 alloy is several times more ductile along with much enhanced toughness compared to its uniform-grained counterparts having comparable tensile strength. The multiscale microstructural heterogeneities, consisting of bimodal-structured (coarse grain ~10-100 μm and fine grain ≤10 μm) center-region and fine-grained surface-layer, were imparted by a new rolling process that combines advantages of both accumulative rolling bonding (ARB) and hard plate rolling (HPR). Using quasi-in-situ electron backscattered diffraction (EBSD) characterizations and slip trace analysis, the superior strength-ductility synergy was discussed in terms of the substantial activation of multiple strain accommodation mechanisms. Due to the high mechanical incompatibility of the multiscale hetero-structure, the hard-to-activate non-basal slips have occurred frequently in fine grains of both center-region and surface-layer. Moreover, the basal-oriented coarse grain in the bimodal-structured center-region plays a prominent role in the dislocation slip behavior of its neighboring fine grains, as reflected by a unique encircled slip trace distribution in them. Our findings reveal that multiscale hetero-structure enables the concurrent activation of various plastic deformation mechanisms. Thereby, the multiscale hetero-structure imparts a pronounced hetero-deformation induced hardening, contributing to enhanced strain-hardening ability, gaining an improved strength-ductility synergy. Our work could shed some light on designing and preparing strong and ductile metallic materials, by tailoring multiscale microstructural heterogeneity using a simple rolling technique.

Understanding the Deformation Behaviours of Mg Alloys with Dispersed Non-Basal Grain-Embedded Orientation Heterostructures

Deformation mechanisms in a novel multiscale hetero-structured Mg alloy with high strength-ductility synergy

Enhanced strength-ductility synergy and activation of non-basal slip in as-extruded Mg–Zn–Ca alloy via heterostructure

Achieving Superior Strength-Ductility Synergy in a Heterostructured Magnesium Alloy Via Low-Temperature Extrusion and Low-Temperature Annealing

Effect of Texture on Deformation Behavior of Heterogeneous Mg-13Gd Alloy with Strength–ductility Synergy

Developing Novel Multiscale Hetero-Structure in Mg-Alloy for High Strength-Ductility Synergy by Short-Routed Rolling

High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy

Mechanical properties and deformation mechanism in Mg-Gd alloy laminate with dual-heterostructure grain size and texture

Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design

Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension

The Synergy Effect of Fine and Coarse Grains on Enhanced Ductility of Bimodal-Structured Mg Alloys

Origins of High Ductility Exhibited by an Extruded Magnesium Alloy Mg-1.8Zn-0.2Ca: Experiments and Crystal Plasticity Modeling

Nanoscale coherent interface strengthening of Mg alloys

Achieving excellent ductility with increased Schmid Factor but decreased direct strain contribution of basal slip in an intergranular misorientation tailored magnesium alloy

A Novel Method for the Preparation of Heterostructures 5083 Aluminum Alloys to Enhancing Comprehensive Mechanical Properties

Achieving High Strength-Ductility Synergy in a Dilute Mg-Gd-Zn-Zr Alloy with Heterogeneous Structure Via Hot Extrusion

Heterogeneous Lamella Mixed Grain Structures of Strength-Ductility Synergy in Medium Strain Rate Rolled AZ31 Magnesium Sheets

Development of Weak-Textured and High-Performance Mg–Zn–Ca Alloy Sheets Based on Zn Content Optimization

Dominant Deformation Mechanisms in Mg–Zn–Ca Alloy

The effect of grain size on deformation modes and deformation heterogeneity in a rolled Mg-Zn-Ca alloy

Mechanistic Study of Mg-Mn-Al Extrusion Alloy with Superior Ductility and High Strength