Abstract:This article takes the application of nanomaterials in new concrete materials as the research object and explores the defects of nanomaterials in improving the toughness and tensile capacity of traditional concrete by analyzing the effects of nanomaterials on the structure and properties of new concrete. This article takes the application of nano-SiO2 in new concrete materials as an example. Firstly, the experiment of preparing nanoconcrete was carried out, and then, aiming at the experimental results, a detailed analysis and discussion on the effects of nano-SiO2 on the shrinkage, mechanical properties, and microstructure of the new concrete materials were carried out. The research results show that the cement paste with nano-SiO2 is much better in chemical shrinkage than the cement paste without admixture, and the chemical shrinkage value of the cement paste with nano-SiO2 increases significantly in the early setting stage. The chemical shrinkage values are 11.4%, 26.7%, 53.9%, and 94.2%, respectively, according to the amount of nano-SiO2 added. With the extension of the setting period, the growth rate of the shrinkage value of cement paste slows down; nano-SiO2 can improve the compressive capacity and strength of concrete, and with the increase of the amount of compressive strength, the value of compressive strength is also increasing. In the early stage of coagulation, when the nano-SiO2 dosage is 1.6%, the compressive strength of the coagulation for 3 days is 39.02%. With the prolongation of the setting period, the increase in compressive strength continues to increase, but the growth rate slows down; the addition of nano-SiO2 has changed the microstructure of concrete. Nano-SiO2 has high pozzolanic activity, which can promote the hydration process of cement, and because of the small particles, it can fill the voids of concrete, thereby improving its compactness and mechanical strength.

An Approach to Effectively Improve the Interfacial Bonding of Paste–limestone by Incorporating Different Nanomaterials

Nanomechanical Characteristics of Interfacial Transition Zone in Nano-Engineered Concrete

Comparative study on mechanisms for improving mechanical properties and microstructure of cement paste modified by different types of nanomaterials

Recent Progress in Nanomaterials for Modern Concrete Infrastructure: Advantages and Challenges

Nanoindentation Characteristics of Cement Paste and Interfacial Transition Zone in Mortar with Rice Husk Ash

Nano-engineering the interfacial transition zone in cement composites with graphene oxide

Improving the Microstructure of ITZ and Reducing the Permeability of Concrete with Various Water/cement Ratios Using Nano-Silica

Influence of Nano-SiO2 Content on Cement Paste and the Interfacial Transition Zone

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

Synergistic effect of PTB emulsion, CaCO3 whisker and Nano-SiO2 on the properties of cement-based materials

Enhancing the interfacial bond performance of engineered cementitious composites and concrete

Interfacial Microstructure and Bond Strength of Nano-Sio2-coated Steel Fibers in Cement Matrix

Application and Microstructure Properties of Nanomaterials in New Concrete Materials

Research progress in mechanisms and properties of nano-modified interface transition zone of Marine concrete

Experimental Study on Improvement of Interfacial Bond Properties of Carbon Fiber Reinforced Cement Matrix Composites by Nano Silica

Understanding the Toughening Mechanism of Silane Coupling Agents in the Interfacial Bonding in Steel Fiber-Reinforced Cementitious Composites

Interfacial Bonding Between Graphene Oxide Coated Carbon Nanotube Fiber and Cement Paste Matrix

Nano Particle Modified Bonding Agent for Concrete Repair

Effect of Different Particle Sizes of Nano-Sio2 on the Properties and Microstructure of Cement Paste

Effect of nano-silica as cementitious materials-reducing admixtures on the workability, mechanical properties and durability of concrete

Nano-engineering the interfacial transition zone between recycled concrete aggregates and fresh paste with graphene oxide