Abstract:Nanothermites possess much attentions relying on potential probability to the fields of the military and civilian. Whereas, the practical applications for nanothermites have been limited by the high electrostatic discharge (ESD) sensitivity and little gas generation, which is a pronounced problem in the microthruster particularly. In this work, the two typical nanothermites (Al/CuO and Al/MoO3, as Al/MXOY) were assembled with various contents of CL-20 to be defined Al/MXOY@CL-20. The characteristics of Al/MXOY@CL-20 were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The ignition properties of Al/MXOY@CL-20, such as burning rate, the unrestrained combustion, ignition temperature, delay time, pressurization and propulsion properties, were studied. In addition, the energy required for 50% ignition probability (E-50) was applied to evaluating the sensitivity of Al/MXOY@CL-20 to ESD. Results revealed that the total heat release for Al/MXOY@CL-20 was increased on account of CL-20, and CL-20 facilitated the transformation of CuO to Cu2O. The burning rates decreased with the increase of CL-20, whereas the burning rate of Al/MoO3@10%CL-20 was little higher than that of Al/MoO3. Al/CuO@10%CL-20 and Al/MoO3@30%CL-20 exhibited superior performances respectively for the maximum flame area, the lowest ignition temperature, the highest pressurization rate and specific impulse. The particular significance was that CL-20 played a positive role for Al/MXOY@CL-20 on the safety to ESD. For instance, the E-50 of Al/CuO@50%CL-20 was 163.84 mJ meanwhile Al/CuO of that was 0.24 mJ. In conclusion, in the light of the superior specific impulse and the excellent safety to ESD, Al/MXOY@CL-20 (especially Al/CuO@10%CL-20 and Al/MoO3@30%CL20) would possess the remarkable application prospects for practice in the microthruster. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Al/Cuf2 As a Novel Nanothermite with Excellent Ignition Characteristics and Outstanding Pressure Output Ability

Al/CuF 2 Composite Materials with Ignition Characteristics and Pressure Output Ability for Nanothermites

Ti/CuO and Ti/CuO/Cellulose Nitrate Nanothermites: An Early Insight into Their Combustion Mechanism

A novel nano-thermite system with BiOF as fluorine-containing oxidant for enhanced energy release performance

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition.

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition

A Smart Thermite with Tunable Properties – Doping of Al/Cuo with Microwave Absorbing Ti3c2 Mxene for Improved Ignition and Combustion Performance

Enhancing the Energy Release Performance of Al/CuO Nanothermites through Hierarchical Structure

Ammonium Perchlorate As an Effective Additive for Enhancing the Combustion and Propulsion Performance of Al/CuO Nanothermites

Electrophoretic Deposition and Characterization of Highly Exothermic Al/CuO Nanothermites

Graphite fluoride as a new oxidizer to construct nano-Al based reactive material and its combustion performance

Fully Dense, Aluminum-Rich Al-Cuo Nanocomposite Powders for Energetic Formulations

Enhanced energy performance from core–shell structured Al@Fe2O3 nanothermite fabricated by atomic layer deposition

Nanothermite with Meringue-like Morphology: From Loose Powder to Ultra-porous Objects

An Excellent Synergy Between CL-20 and Nanothermites in Flaming and Propelling with High Specific Impulse and Superior Safety to Electrostatic Discharge

High dispersity and ultralight PVP-mediated Al/MFe2O4/g-C3N4 (M = Cu, Mg, Ni) nanothermites synthesized by a novel sol-freeze-drying technology

Ti/CuO Nanothermite—Study of the Combustion Process

Preparation of Activated Carbon Nanostructured Al@CuO with Low Static Sensitivity and High Reactivity

Generation of fast propagating combustion and shock waves with copper oxide/aluminum nanothermite composites

Reactivity adjustment from the contact extent between CuO and Al phases in nanothermites

Combustion Characteristics of Physically Mixed 40 nm Aluminum/Copper Oxide Nanothermites Using Laser Ignition