Abstract:Owing to its capacity to synthesize high molecular weight of Poly Lactic Acid (PLA), polymerization via Ring Opening Polymerization (ROP) has gotten the attention of researchers. Accordingly, since the ROP technique utilizes lactide as a potential monomer for PLA synthesis, the production of lactide is indispensable. Currently, in order to solve the problem associated with commonly used homogeneous tin-based catalyst, looking for alternative catalysts for lactide synthesis are becoming more attractive. In the present study, the optimum reaction conditions for lactide synthesis via thermal catalytic depolymerization by using ZnO nanoparticle dispersion were investigated. The effects of three major factors including reaction temperature (190 °C, 210 °C, and 230 °C), reaction time (1 h, 2 h, and 10 h), and catalyst concentration (0.3%w/w, 0.65%w/w, 1.0%w/w) on the yield of lactide were studied. The oligomer PLA was produced from an aqueous solution of Lactic acid (50 mL, 88%) via polycondensation reaction at 150 °C for 4 h. The suspension of Zno Nps was prepared by dissolving Zno Nps powder in distilled water with a ratio of 1:4. The produced oligomer of PLA was depolymerized via thermal catalytic depolymerization using 20% w/w of the prepared Zno NPs dispersion. The optimization of lactide yield and depolymerization reaction parameters was done via response surface methodology with a Box-Behnken design. Based on the analysis, the optimum conditions were found to be a reaction temperature of 215.73 °C, a reaction time of 7.32 h, and a catalyst concentration of 0.72%w/w along with the maximum lactide yield of 80.4%. Generally, the outcome of the study reveals that the utilization of ZnO nanoparticle dispersions as a catalyst for lactide synthesis from oligomer PLA via thermal catalytic depolymerization is worthful

Polyaniline-Supported Zinc Oxide Nanocomposite-Catalyzed Condensation of Lactic Acid to Lactide with High Yield and Optical Purity

Melt Polycondensation of L‐lactic Acid Catalyzed by 1,3‐dialkylimidazolium Ionic Liquids

Design of a Heterogeneous Catalytic Process for the Continuous and Direct Synthesis of Lactide from Lactic Acid

Oxidative Lactonization of Diethylene Glycol to High-Value-added Product 1, 4-Dioxan-2-one Promoted by a Highly Efficacious and Selective Catalyst ZnO-ZnCr2O4

Preparation of L-Lactide with High Optical Purity Via the Zinc-Doped Polypyrrole-Catalyzed Lactic Acid Condensation

Study on zinc oxide‐creatinine hybrid catalyst for efficient lactide synthesis with low racemization

Catalytic Hydrogenation of Levulinic Acid to Gamma-Valerolactone over Ni/ZrO2

Efficient Synthesis of Lactide with Low Racemization Catalyzed by Sodium Bicarbonate and Zinc Lactate

Lactide synthesis via thermal catalytic depolymerization of poly lactic acid oligomer using ZnO nanoparticle dispersion

A Highly Active Zinc-Based Catalyst System for Lactide Homo- and Copolymerization under Industrially Relevant Conditions

Synthesis of Polylactide with Low-toxic Zinc Catalysts

A practical and concise homogeneous nickel catalyst for efficient solvent-free synthesis of -valerolactone

Highly Efficient Production of 2,3-Pentanedione form Condensation of Bio-Derived Lactic Acid over Polymorphic ZrO2

Direct Synthesis of Lactide from Concentrated Lactic Acid Catalyzed by Hierarchical Sn-beta Zeolite

Controlled Synthesis of L-Lactide Using Sn-Beta Zeolite Catalysts in a One-Step Route

Enhancing catalytic activity via metal tuning of zeolitic imidazole frameworks for ring opening polymerization of l-lactide

Highly efficient CuNi-ZrO2 nanocomposites for selective hydrogenation of levulinic acid to γ-valerolactone

Selective Catalytic Dehydrogenative Oxidation of Bio-Polyols to Lactic Acid

Synthesis process of high-performance and high-molecular-weight poly-L-lactic acid

Sodium nitrate modified SBA-15 and fumed silica for efficient production of acrylic acid and 2,3-pentanedione from lactic acid

Electrochemical Upgrading of Waste Polylactic Acid Plastic for the Coproduction of C2 Chemicals and Green Hydrogen